Hi, This series replaces the custom JZ4740 DMA API with a dmaengine driver. This is done in 3 steps: 1) Add a dmaengine driver which wraps the custom JZ4740 DMA API 2) Update all users of the JZ4740 DMA API to use dmaengine instead 3) Remove the custom API and move all direct hardware access to the dmaengine driver. The first two patches in the series also make sure that the clock of the DMA core is enabled. Since the patches in this series depend on each other I'd prefer if they could all go through the DMA tree. There are a few minor changes to the patch 3 in v2 of this series, all other patches are identical to v1. - Lars Lars-Peter Clausen (4): dma: Add a jz4740 dmaengine driver MIPS: jz4740: Register jz4740 DMA device ASoC: jz4740: Use the generic dmaengine PCM driver MIPS: jz4740: Remove custom DMA API Maarten ter Huurne (2): MIPS: jz4740: Correct clock gate bit for DMA controller MIPS: jz4740: Acquire and enable DMA controller clock arch/mips/include/asm/mach-jz4740/dma.h | 56 --- arch/mips/include/asm/mach-jz4740/platform.h | 1 + arch/mips/jz4740/Makefile | 2 +- arch/mips/jz4740/board-qi_lb60.c | 1 + arch/mips/jz4740/clock.c | 2 +- arch/mips/jz4740/dma.c | 287 ------------- arch/mips/jz4740/platform.c | 21 + drivers/dma/Kconfig | 6 + drivers/dma/Makefile | 1 + drivers/dma/dma-jz4740.c | 617 +++++++++++++++++++++++++++ sound/soc/jz4740/Kconfig | 1 + sound/soc/jz4740/jz4740-i2s.c | 48 +-- sound/soc/jz4740/jz4740-pcm.c | 310 +------------- sound/soc/jz4740/jz4740-pcm.h | 20 - 14 files changed, 676 insertions(+), 697 deletions(-) delete mode 100644 arch/mips/jz4740/dma.c create mode 100644 drivers/dma/dma-jz4740.c delete mode 100644 sound/soc/jz4740/jz4740-pcm.h -- 1.8.2.1
