[PATCH] MIPS: ralink: use the dwc2 driver for the rt305x USB controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This sets up the devicetree file for the rt3050 chip series and rt3052
eval board to use the right compatible string for the dwc2 driver.
---
 arch/mips/ralink/dts/rt3050.dtsi     | 10 ++++++++++
 arch/mips/ralink/dts/rt3052_eval.dts |  4 ++++
 2 files changed, 14 insertions(+)

This is the same patch I sent previously, but now on its own (without
the additional DMA setup patches, which I'm trying to get added to the
dwc2 driver itself).

diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
index ef7da1e..e3203d4 100644
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -55,4 +55,14 @@
 			reg-shift = <2>;
 		};
 	};
+
+	usb@101c0000 {
+		compatible = "ralink,rt3050-usb", "snps,dwc2";
+		reg = <0x101c0000 40000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		status = "disabled";
+	};
 };
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
index df17f5f..77208c1 100644
--- a/arch/mips/ralink/dts/rt3052_eval.dts
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -43,4 +43,8 @@
 			reg = <0x50000 0x7b0000>;
 		};
 	};
+
+	usb@101c0000 {
+		status = "ok";
+	};
 };
-- 
1.8.0



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux