Hello.
On 15-04-2013 14:41, John Crispin wrote:
Populate struct soc_info with the data that describes our RAM window.
As memory detection fails on RT5350 we read the amount of available memory
from the system controller.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
---
arch/mips/include/asm/mach-ralink/rt305x.h | 6 ++++
arch/mips/ralink/rt305x.c | 45 ++++++++++++++++++++++++++++
2 files changed, 51 insertions(+)
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
index 80cda8a..e68afef 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -157,4 +157,10 @@ static inline int soc_is_rt5350(void)
#define RT3352_RSTCTRL_UDEV BIT(25)
#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)
+#define RT305X_SDRAM_BASE 0x00000000
+#define RT305X_MEM_SIZE_MIN (2 * 1024 * 1024)
+#define RT305X_MEM_SIZE_MAX (64 * 1024 * 1024)
+#define RT3352_MEM_SIZE_MIN (2 * 1024 * 1024)
+#define RT3352_MEM_SIZE_MAX (256 * 1024 * 1024)
+
#endif
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index e9dbf8c..da85f10 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -122,6 +122,40 @@ struct ralink_pinmux rt_gpio_pinmux = {
.wdt_reset = rt305x_wdt_reset,
};
+static unsigned long rt5350_get_mem_size(void)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+ unsigned long ret;
+ u32 t;
+
+ t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
+ t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
+ RT5350_SYSCFG0_DRAM_SIZE_MASK;
+
+ switch (t) {
+ case RT5350_SYSCFG0_DRAM_SIZE_2M:
+ ret = 2 * 1024 * 1024;
+ break;
+ case RT5350_SYSCFG0_DRAM_SIZE_8M:
+ ret = 8 * 1024 * 1024;
+ break;
+ case RT5350_SYSCFG0_DRAM_SIZE_16M:
+ ret = 16 * 1024 * 1024;
+ break;
+ case RT5350_SYSCFG0_DRAM_SIZE_32M:
+ ret = 32 * 1024 * 1024;
+ break;
+ case RT5350_SYSCFG0_DRAM_SIZE_64M:
+ ret = 64 * 1024 * 1024;
+ break;
+ default:
Maybe it's worth including <linux/sizes.h> as well?
WBR, Sergei
