Add support code for rt2880 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
---
arch/mips/Kconfig | 2 +-
arch/mips/include/asm/mach-ralink/rt288x.h | 49 ++++++++++
arch/mips/ralink/Kconfig | 3 +
arch/mips/ralink/Makefile | 1 +
arch/mips/ralink/Platform | 5 +
arch/mips/ralink/rt288x.c | 139 ++++++++++++++++++++++++++++
6 files changed, 198 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/include/asm/mach-ralink/rt288x.h
create mode 100644 arch/mips/ralink/rt288x.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 27a4bfa..c1997db 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1144,7 +1144,7 @@ config BOOT_ELF32
config MIPS_L1_CACHE_SHIFT
int
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
default "6" if MIPS_CPU_SCACHE
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
default "5"
diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
new file mode 100644
index 0000000..ad8b42d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt288x.h
@@ -0,0 +1,49 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@xxxxxxxxxxx>
+ * Copyright (C) 2013 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#ifndef _RT288X_REGS_H_
+#define _RT288X_REGS_H_
+
+#define RT2880_SYSC_BASE 0x00300000
+
+#define SYSC_REG_CHIP_NAME0 0x00
+#define SYSC_REG_CHIP_NAME1 0x04
+#define SYSC_REG_CHIP_ID 0x0c
+#define SYSC_REG_SYSTEM_CONFIG 0x10
+#define SYSC_REG_CLKCFG 0x30
+
+#define RT2880_CHIP_NAME0 0x38325452
+#define RT2880_CHIP_NAME1 0x20203038
+
+#define CHIP_ID_ID_MASK 0xff
+#define CHIP_ID_ID_SHIFT 8
+#define CHIP_ID_REV_MASK 0xff
+
+#define SYSTEM_CONFIG_CPUCLK_SHIFT 20
+#define SYSTEM_CONFIG_CPUCLK_MASK 0x3
+#define SYSTEM_CONFIG_CPUCLK_250 0x0
+#define SYSTEM_CONFIG_CPUCLK_266 0x1
+#define SYSTEM_CONFIG_CPUCLK_280 0x2
+#define SYSTEM_CONFIG_CPUCLK_300 0x3
+
+#define RT2880_GPIO_MODE_I2C BIT(0)
+#define RT2880_GPIO_MODE_UART0 BIT(1)
+#define RT2880_GPIO_MODE_SPI BIT(2)
+#define RT2880_GPIO_MODE_UART1 BIT(3)
+#define RT2880_GPIO_MODE_JTAG BIT(4)
+#define RT2880_GPIO_MODE_MDIO BIT(5)
+#define RT2880_GPIO_MODE_SDRAM BIT(6)
+#define RT2880_GPIO_MODE_PCI BIT(7)
+
+#define CLKCFG_SRAM_CS_N_WDT BIT(9)
+
+#endif
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index a0b0197..6723b94 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -6,6 +6,9 @@ choice
help
Select Ralink MIPS SoC type.
+ config SOC_RT288X
+ bool "RT288x"
+
config SOC_RT305X
bool "RT305x"
select USB_ARCH_HAS_HCD
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index 939757f..6d826f2 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -8,6 +8,7 @@
obj-y := prom.o of.o reset.o clk.o irq.o
+obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6babd65..3f49e51 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -5,6 +5,11 @@ core-$(CONFIG_RALINK) += arch/mips/ralink/
cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
#
+# Ralink RT288x
+#
+load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
+
+#
# Ralink RT305x
#
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
new file mode 100644
index 0000000..1e0788e
--- /dev/null
+++ b/arch/mips/ralink/rt288x.c
@@ -0,0 +1,139 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@xxxxxxxxxxx>
+ * Copyright (C) 2013 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt288x.h>
+
+#include "common.h"
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = RT2880_GPIO_MODE_I2C,
+ .gpio_first = 1,
+ .gpio_last = 2,
+ }, {
+ .name = "spi",
+ .mask = RT2880_GPIO_MODE_SPI,
+ .gpio_first = 3,
+ .gpio_last = 6,
+ }, {
+ .name = "uartlite",
+ .mask = RT2880_GPIO_MODE_UART0,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "jtag",
+ .mask = RT2880_GPIO_MODE_JTAG,
+ .gpio_first = 17,
+ .gpio_last = 21,
+ }, {
+ .name = "mdio",
+ .mask = RT2880_GPIO_MODE_MDIO,
+ .gpio_first = 22,
+ .gpio_last = 23,
+ }, {
+ .name = "sdram",
+ .mask = RT2880_GPIO_MODE_SDRAM,
+ .gpio_first = 24,
+ .gpio_last = 39,
+ }, {
+ .name = "pci",
+ .mask = RT2880_GPIO_MODE_PCI,
+ .gpio_first = 40,
+ .gpio_last = 71,
+ }, {0}
+};
+
+static void rt288x_wdt_reset(void)
+{
+ u32 t;
+
+ /* enable WDT reset output on pin SRAM_CS_N */
+ t = rt_sysc_r32(SYSC_REG_CLKCFG);
+ t |= CLKCFG_SRAM_CS_N_WDT;
+ rt_sysc_w32(t, SYSC_REG_CLKCFG);
+}
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .wdt_reset = rt288x_wdt_reset,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate;
+ u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+ t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
+
+ switch (t) {
+ case SYSTEM_CONFIG_CPUCLK_250:
+ cpu_rate = 250000000;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_266:
+ cpu_rate = 266666667;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_280:
+ cpu_rate = 280000000;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_300:
+ cpu_rate = 300000000;
+ break;
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("300100.timer", cpu_rate / 2);
+ ralink_clk_add("300120.watchdog", cpu_rate / 2);
+ ralink_clk_add("300500.uart", cpu_rate / 2);
+ ralink_clk_add("300c00.uartlite", cpu_rate / 2);
+ ralink_clk_add("400000.ethernet", cpu_rate / 2);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
+ const char *name;
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+ id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+ if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
+ soc_info->compatible = "ralink,r2880-soc";
+ name = "RT2880";
+ } else {
+ panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+ }
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s id:%u rev:%u",
+ name,
+ (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+ (id & CHIP_ID_REV_MASK));
+}
--
1.7.10.4
