Add a dtsi file for RT5350 Soc. This SoC is almost the same as RT3050 but has
OHCI/EHCI in favour of the Synopsis DWC2 core.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
---
arch/mips/ralink/dts/rt5350.dtsi | 181 ++++++++++++++++++++++++++++++++++++++
1 file changed, 181 insertions(+)
create mode 100644 arch/mips/ralink/dts/rt5350.dtsi
diff --git a/arch/mips/ralink/dts/rt5350.dtsi b/arch/mips/ralink/dts/rt5350.dtsi
new file mode 100644
index 0000000..9ca95a3
--- /dev/null
+++ b/arch/mips/ralink/dts/rt5350.dtsi
@@ -0,0 +1,181 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt5350-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600 init=/init";
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ timer@100 {
+ compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+
+ status = "disabled";
+ };
+
+ watchdog@120 {
+ compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
+ reg = <0x120 0x10>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ gpio0: gpio@600 {
+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ status = "disabled";
+ };
+
+ gpio1: gpio@638 {
+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+ reg = <0x638 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio2: gpio@660 {
+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+ reg = <0x660 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,num-gpios = <12>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ spi@b00 {
+ compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+
+ ethernet@10100000 {
+ compatible = "ralink,rt5350-eth", "ralink,rt3050-eth";
+ reg = <0x10100000 10000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <5>;
+
+ status = "disabled";
+ };
+
+ esw@10110000 {
+ compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
+ reg = <0x10110000 8000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+
+ status = "disabled";
+ };
+
+ wmac@10180000 {
+ compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac";
+ reg = <0x10180000 40000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ status = "disabled";
+ };
+
+ ehci@101c0000 {
+ compatible = "ralink,rt5350-ehci", "ehci-platform";
+ reg = <0x101c0000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+
+ status = "disabled";
+ };
+
+ ohci@101c1000 {
+ compatible = "ralink,rt5350-ohci", "ohci-platform";
+ reg = <0x101c1000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+
+ status = "disabled";
+ };
+};
--
1.7.10.4
