speed_hz is a write only member, so we can safely remove it and its
generation. Also fixes the missing clk_put after getting the periph
clock.
Signed-off-by: Jonas Gorski <jogo@xxxxxxxxxxx>
---
This patch applies cleanly to both spi-next and mips-next, and I don't
have any preference into which tree it should go. Maybe mips, as it
"wins" in terms of removed lines ;-).
arch/mips/bcm63xx/dev-spi.c | 11 -----------
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 1 -
drivers/spi/spi-bcm63xx.c | 2 --
3 files changed, 14 deletions(-)
diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c
index f1c9c3e..e97fd60 100644
--- a/arch/mips/bcm63xx/dev-spi.c
+++ b/arch/mips/bcm63xx/dev-spi.c
@@ -85,20 +85,9 @@ static struct platform_device bcm63xx_spi_device = {
int __init bcm63xx_spi_register(void)
{
- struct clk *periph_clk;
-
if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
return -ENODEV;
- periph_clk = clk_get(NULL, "periph");
- if (IS_ERR(periph_clk)) {
- pr_err("unable to get periph clock\n");
- return -ENODEV;
- }
-
- /* Set bus frequency */
- spi_pdata.speed_hz = clk_get_rate(periph_clk);
-
spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
spi_resources[0].end = spi_resources[0].start;
spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
index c9bae13..b0184cf 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
@@ -13,7 +13,6 @@ struct bcm63xx_spi_pdata {
unsigned int msg_ctl_width;
int bus_num;
int num_chipselect;
- u32 speed_hz;
};
enum bcm63xx_regs_spi {
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 973099b..a4ec5f4 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -46,7 +46,6 @@ struct bcm63xx_spi {
int irq;
/* Platform data */
- u32 speed_hz;
unsigned fifo_size;
unsigned int msg_type_shift;
unsigned int msg_ctl_width;
@@ -436,7 +435,6 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
master->transfer_one_message = bcm63xx_spi_transfer_one;
master->mode_bits = MODEBITS;
- bs->speed_hz = pdata->speed_hz;
bs->msg_type_shift = pdata->msg_type_shift;
bs->msg_ctl_width = pdata->msg_ctl_width;
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
--
1.7.10.4
