RE: [PATCH 0/5] Chipidea driver support for the AR933x platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alex,
I am working on the incorporating all received comments - thanks to all for
taking their time to comment.
Apologies for not replying to the received mails, didn't want to spam with
OK replies to each separately.

Regards,
Svetoslav.


-----Original Message-----
From: Alexander Shishkin [mailto:alexander.shishkin@xxxxxxxxxxxxxxx] 
Sent: Tuesday, February 26, 2013 3:36 PM
To: Svetoslav Neykov; Ralf Baechle; Greg Kroah-Hartman; Gabor Juhos; John
Crispin; Alan Stern; Luis R. Rodriguez
Cc: linux-mips@xxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx; Svetoslav Neykov
Subject: Re: [PATCH 0/5] Chipidea driver support for the AR933x platform

Svetoslav Neykov <svetoslav@xxxxxxxxxxx> writes:

> Add support for the usb controller in AR933x platform.
> The processor is big-endian so all multi-byte values of the usb 
> descriptors must be converted explicitly. Another difference is that
> the controller supports both host and device modes but not OTG.
> The patches are tested on WR703n router running OpenWRT trunk.

Svetoslav, are you working on these or do you have time to address the
issues raised in review?

Thanks,
--
Alex



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux