Re: [GIT PULL] x86/mm changes for v3.9-rc1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 22, 2013 at 9:24 AM, Konrad Rzeszutek Wilk
<konrad.wilk@xxxxxxxxxx> wrote:
> On Fri, Feb 22, 2013 at 11:55:31AM -0500, Konrad Rzeszutek Wilk wrote:
>> On Thu, Feb 21, 2013 at 04:34:06PM -0800, H. Peter Anvin wrote:
>> > Hi Linus,
>> >
>> > This is a huge set of several partly interrelated (and concurrently
>> > developed) changes, which is why the branch history is messier than
>> > one would like.
>> >
>> > The *really* big items are two humonguous patchsets mostly developed
>> > by Yinghai Lu at my request, which completely revamps the way we
>> > create initial page tables.  In particular, rather than estimating how
>> > much memory we will need for page tables and then build them into that
>> > memory -- a calculation that has shown to be incredibly fragile -- we
>> > now build them (on 64 bits) with the aid of a "pseudo-linear mode" --
>> > a #PF handler which creates temporary page tables on demand.
>> >
>> > This has several advantages:
>> >
>> > 1. It makes it much easier to support things that need access to
>> >    data very early (a followon patchset uses this to load microcode
>> >    way early in the kernel startup).
>> >
>> > 2. It allows the kernel and all the kernel data objects to be invoked
>> >    from above the 4 GB limit.  This allows kdump to work on very large
>> >    systems.
>> >
>> > 3. It greatly reduces the difference between Xen and native (Xen's
>> >    equivalent of the #PF handler are the temporary page tables created
>> >    by the domain builder), eliminating a bunch of fragile hooks.
>> >
>> > The patch series also gets us a bit closer to W^X.
>> >
>> > Additional work in this pull is the 64-bit get_user() work which you
>> > were also involved with, and a bunch of cleanups/speedups to
>> > __phys_addr()/__pa().
>>
>> Looking at figuring out which of the patches in the branch did this, but
>> with this merge I am getting a crash with a very simple PV guest (booted with
>> one 1G):
>>
>> Call Trace:
>>   [<ffffffff8103feba>] xen_get_user_pgd+0x5a  <--
>>   [<ffffffff8103feba>] xen_get_user_pgd+0x5a
>>   [<ffffffff81042d27>] xen_write_cr3+0x77
>>   [<ffffffff81ad2d21>] init_mem_mapping+0x1f9
>>   [<ffffffff81ac293f>] setup_arch+0x742
>>   [<ffffffff81666d71>] printk+0x48
>>   [<ffffffff81abcd62>] start_kernel+0x90
>>   [<ffffffff8109416b>] __add_preferred_console.clone.1+0x9b
>>   [<ffffffff81abc5f7>] x86_64_start_reservations+0x2a
>>   [<ffffffff81abf0c7>] xen_start_kernel+0x564
>>
>> And the hypervisor says:
>> (XEN) d7:v0: unhandled page fault (ec=0000)
>> (XEN) Pagetable walk from ffffea000005b2d0:
>> (XEN)  L4[0x1d4] = 0000000000000000 ffffffffffffffff
>> (XEN) domain_crash_sync called from entry.S
>> (XEN) Domain 7 (vcpu#0) crashed on cpu#3:
>> (XEN) ----[ Xen-4.2.0  x86_64  debug=n  Not tainted ]----
>> (XEN) CPU:    3
>> (XEN) RIP:    e033:[<ffffffff8103feba>]
>> (XEN) RFLAGS: 0000000000000206   EM: 1   CONTEXT: pv guest
>> (XEN) rax: ffffea0000000000   rbx: 0000000001a0c000   rcx: 0000000080000000
>> (XEN) rdx: 000000000005b2a0   rsi: 0000000001a0c000   rdi: 0000000000000000
>> (XEN) rbp: ffffffff81a01dd8   rsp: ffffffff81a01d90   r8:  0000000000000000
>> (XEN) r9:  0000000010000001   r10: 0000000000000000   r11: 0000000000000000
>> (XEN) r12: 0000000000000000   r13: 0000001000000000   r14: 0000000000000000
>> (XEN) r15: 0000000000100000   cr0: 000000008005003b   cr4: 00000000000406f0
>> (XEN) cr3: 0000000411165000   cr2: ffffea000005b2d0
>> (XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
>> (XEN) Guest stack trace from rsp=ffffffff81a01d90:
>> (XEN)    0000000080000000 0000000000000000 0000000000000000 ffffffff8103feba
>> (XEN)    000000010000e030 0000000000010006 ffffffff81a01dd8 000000000000e02b
>
> Here is a better serial log of the crash (just booting a normal Xen 4.1 + initial
> kernel with 8GB):
>
> PXELINUX 3.82 2009-06-09  Copyright (C) 1994-2009 H. Peter Anvin et al
> boot:
> Loading xen.gz... ok
> Loading vmlinuz... ok
> Loading initramfs.cpio.gz... ok
>  __  __            _  _    _   ____
>  \ \/ /___ _ __   | || |  / | | ___|    _ __  _ __ ___
>   \  // _ \ '_(_)_(_)____/   | .__/|_|  \___|
>                                        |_|
> (XEN) Xen version 4.1.5-pre (konrad@xxxxxxxxxxxx) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) Fri Feb 22 11:37:00 EST 2013
> (XEN) Latest ChangeSet: Fri Feb 15 15:31:55 2013 +0100 23459:9f12bdd6b7f0
> (XEN) Console output is synchronous.
> (XEN) Bootloader: unknown
> (XEN) Command line: cpuinfo conring_size=1048576 sync_console cpufreq=verbose com1=115200,8n1 console=com1,vga loglvl=all guest_loglvl=all
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN)  EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN)  Found 1 MBR signatures
> (XEN)  Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009ec00 (usable)
> (XEN)  000000000009ec00 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 0000000020000000 (usable)
> (XEN)  0000000020000000 - 0000000020200000 (reserved)
> (XEN)  0000000020200000 - 0000000040000000 (usable)
> (XEN)  0000000040000000 - 0000000040200000 (reserved)
> (XEN)  0000000040200000 - 00000000bad80000 (usable)
> (XEN)  00000000bad80000 - 00000000badc9000 (ACPI NVS)
> (XEN)  00000000badc9000 - 00000000badd1000 (ACPI data)
> (XEN)  00000000badd1000 - 00000000badf4000 (reserved)
> (XEN)  00000000badf4000 - 00000000badf6000 (usable)
> (XEN)  00000000badf6000 - 00000000bae06000 (reserved)
> (XEN)  00000000bae06000 - 00000000bae14000 (ACPI NVS)
> (XEN)  00000000bae14000 - 00000000bae3c000 (reserved)
> (XEN)  00000000bae3c000 - 00000000bae7f000 (ACPI NVS)
> (XEN)  00000000bae7f000 - 00000000bb000000 (usable)
> (XEN)  00000000bb800000 - 00000000bfa00000 (reserved)
> (XEN)  00000000fed1c000 - 00000000fed40000 (reserved)
> (XEN)  00000000ff000000 - 0000000100000000 (reserved)
> (XEN)  0000000100000000 - 000000023fe00000 (usable)
> (XEN) ACPI: RSDP 000F0450, 0024 (r2 ALASKA)
> (XEN) ACPI: XSDT BADC9068, 0054 (r1 ALASKA    A M I  1072009 AMI     10013)
> (XEN)  PROC        1 MSFT  3000001)
> (XEN) ACPI: MCFG BADD0580, 003C (r1 ALASKA    A M I  1072009 MSFT       97)
> (XEN) ACPI: HPET BADD05C0, 0038 (r1 ALASKA    A M I  1072009 AMI.        4)
> (XEN) ACPI: ASF! BADD05F8, 00A0 (r32 INTEL       HCG        1 TFSM    F4240)
> (XEN) System RAM: 8104MB (8299140kB)
> (XEN) No NUMA configuration found
> (XEN) Faking a node at 0000000000000000-000000023fe00000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000fcde0
> (XEN) DMI 2.7 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x408
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
> (XEN) ACPI: 32/64X FACS address mismatch in FADT - bae0bf80/0000000000000000, using 32
> (XEN) ACPI:                  wakeup_vec[bae0bf8c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 6:10 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> (XEN) Processor #2 6:10 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
> (XEN) Processor #1 6:10 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> (XEN) Processor #3 6:10 APIC version 21
> (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> (XEN) PCI: Not using MMCONFIG.
> (XEN) Table is not found!
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Initializing CPU#0
> (XEN) Detected 3093.067 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 0
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 256K
> (XEN) CPU: L3 cache: 3072K
> (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
> (XEN) CPU0: Thermal monitoring enabled (TM1)
> (XEN) Intel machine check reporting enabled
> (XEN) I/O virtualisation disabled
> (XEN) CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz stepping 07
> (XEN) Enabled directed EOI with ioapic_ack_old on!
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using old ACK method
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> (XEN) TSC deadline timer enabled
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Allocated console ring of 1048576 KiB.
> (XEN) VMX: Supported advanced features:
> (isation
> (XEN)  - APIC TPR shadow
> (XEN)  - Extended Page Tables (EPT)
> (XEN)  - Virtual-Processor Identifiers (VPID)
> (XEN)  - Virtual NMI
> (XEN)  - MSR direct-access bitmap
> (XEN)  - Unrestricted Guest
> (XEN) HVM: ASIDs enabled.
> (XEN) HVM: VMX enabled
> (XEN) HVM: Hardware Assisted Paging (HAP) detected
> (XEN) HVM: HAP page sizes: 4kB, 2MB
> (XEN) Booting processor 1/1 eip 7c000
> (XEN) Initializing CPU#1
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 0
> (XEN) CPU: L1 I cache: 32K, L1 D
> (XEN) Initializing CPU#2
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 1
> (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
> (XEN) CPU: L2 cache: 256K
> (XEN) CPU: L3 cache: 3072K
> (XEN) CPU2: Thermal monitoring enabled (TM1)
> (XEN) CPU2: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz stepping 07
> (XEN) Booting processor 3/3 eip 7c000
> (XEN) Initializing CPU#3
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU: Processor Core ID: 1
> (XEN) CPU: L1 I cache: 32K, L1 D100 CPU @ 3.10GHz stepping 07
> (XEN) Brought up 4 CPUs
> (XEN) ACPI sleep modes: S3
> (XEN) mcheck_poll: Machine check polling timer started.
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x9e0000
> (XEN) elf_parse_binary: phdr: paddr=0x1a00000 memsz=0xa60f0
> (XEN): paddr=0x1abc000 memsz=0x61b000
> (XEN) elf_parse_binary: memory: 0x1000000 -> 0x20d7000
> (XEN) elf_xen_parse_note: GUEST_OS = "linux"
> (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
> (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
> (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
> (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81abc1e0
> (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
> (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
> (XEN) elf_xen_parse_note: PAE_MODE = "yes"
> (XEN) elf_xen_parse_note: LOADER = "generic"
> (XEN) elf_xen_parse_note: unknown xen elf note (0xd)
> (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
> (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
> (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
> (XEN) elf_xen_addr_calc_check: addresses:
> (XEN)     virt_base        = 0xffffffff80000000
> (XEN)     elf_paddr_offset = 0x0
> (XEN)     virt_offset      = 0xffffffff80000000
> (XEN)     virt_kstart      = 0xffffffff81000000
> (XEN)     virt_kend        = 0xffffffff820d7000
> (XEN)     virt_entry       = 0xffffffff81abc1e0
> (XEN)     p2m_base         = 0xffffffffffffffff
> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x20d7000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000220000000->0000000224000000 (1661249 pages to be allocated)
> (XEN)  Init. ramdisk: 000000022cbdc000->000000023fe00000
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: ffffffff81000000->ffffffff820d7000
> (XEN)  Init. ramdisk: ffffffff820d7000->ffffffff952fb000
> (XEN)  Phys-Mach map: ffffffff952fb000->ffffffff96060b28
> (XEN)  Start info:    ffffffff96061000->ffffffff960614b4
> (XEN)  Page tables:   ffffffff96062000->ffffffff96117000
> (XEN)  Boot stack:    ffffffff96117000->ffffffff96118000
> (XEN)  TOTAL:         ffffffff80000000->ffffffff96400000
> (XEN)  ENTRY ADDRESS: ffffffff81abc1e0
> (XEN) Dom0 has maximum 4 VCPUs
> (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff819e0000
> (XEN) elf_load_binary: phdr 1 at 0xffffffff81a00000 -> 0xffffffff81aa60f0
> (XEN) elf_load_binary: phdr 2 at 0xffffffff81aa7000 -> 0xffffffff81abbbc0
> (XEN) elf_load_binary: phdr 3 at 0xffffffff81abc000 -> 0xffffffff81baf000
> (XEN) Scrubbing Free RAM: .done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: All
> (XEN) ***************************intended to aid debugging of Xen by ensuring
> (XEN) ******* that all output is synchronously delivered on the serial line.
> (XEN) ******* However it can introduce SIGNIFICANT latencies and affect
> (XEN) ******* timekeeping. It is NOT recommended for production use!
> (XEN) **********************************************
> (XEN) 3... 2... 1...
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
> (XEN) Freed 224kB init memory.
> mapping kernel into physical memory
> about to get started...
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 3.8.0upstream-06471-g2ef14f4-dirty (konrad@xxxxxxxxxxxxxxxxxx) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Fri Feb 22 11:36:48 EST 2013
> [    0.000000] Command line: initcall_debug debug console=hvc0 loglevel=10 xen-pciback.hide=(01:00.0) earlyprintk=xen
> [    0.000000] Freeing 9e-100 pfn range: 98 pages freed
> [    0.000000] 1-1 mapping on 9e->100
> [    0.000000] Freeing 20000-20200 pfn range: 512 pages freed
> [    0.000000] 1-1 mapping on 20000->20200
> [    0.000000] Freeing 40000-40200 pfn range: 512 pages freed
> [    0.000000] 1-1 mapping on 40000->40200
> [    0.000000] Freeing bad80-badf4 pfn range: 116 pages freed
> [    0.000000] 1-1 mapping on bad80->badf4
> [    0.000000] Freeing badf6-bae7f pfn range: 137 pages freed
> [    0.000000] 1-1 mapping on badf6->bae7f
> [    0.000000] Freeing bb000-100000 pfn range: 282624 pages freed
> [    0.000000] 1-1 mapping on bb000->100000
> [    0.000000] Released 283999 pages of unused memory
> [    0.000000] Set 283999 page(s) to 1-1 mapping
> [    0.000000] Populating 1acb65-1f20c4 pfn range: 283999 pages added
> [    0.000000] e820: BIOS-provided physical RAM map:
> [    0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
> [    0.000000] Xen: [mem 0x000000000009ec00-0x00000000000fffff] reserved
> [    0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
> [    0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
> [    0.000000] Xen: [mem 0x0000000020200000-0x000000003fffffff] usable
> [    0.000000] Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved
> [    0.000000] Xen: [mem 0x0000000040200000-0x00000000bad7ffff] usable
> [    0.000000] Xen: [mem 0x00000000bad80000-0x00000000badc8fff] ACPI NVS
> [    0.000000] Xen: [mem 0x00000000badc9000-0x00000000badd0fff] ACPI data
> [    0.000000] Xen: [mem 0x00000000badd1000-0x00000000badf3fff] reserved
> [    0.000000] Xen: [mem 0x00000000badf4000-0x00000000badf5fff] usable
> [    0.000000] Xen: [mem 0x00000000badf6000-0x00000000bae05fff] reserved
> [    0.000000] Xen: [mem 0x00000000bae06000-0x00000000bae13fff] ACPI NVS
> [    0.000000] Xen: [mem 0x00000000bae14000-0x00000000bae3bfff] reserved
> [    0.000000] Xen: [mem 0x00000000bae3c000-0x00000000bae7efff] ACPI NVS
> [    0.000000] Xen: [mem 0x00000000bae7f000-0x00000000baffffff] usable
> [    0.000000] Xen: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
> [    0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [    0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
> [    0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [    0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [    0.000000] Xen: [mem 0x0000000100000000-0x000000023fdfffff] usable
> [    0.000000] bootconsole [xenboot0] enabled
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] SMBIOS 2.7 present.
> [    0.000000] DMI: MSI MS-7680/H61M-P23 (MS-7680), BIOS V17.0 03/14/2011
> [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [    0.000000] No AGP bridge found
> [    0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
> [    0.000000] e820: lacanning 1 areas for low memory corruption
> [    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
> [    0.000000] reserving inaccessible SNB gfx pages
> [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
> [    0.000000] init_memory_mapping: [mem 0x1f2000000-0x1f20c3fff]
> [    0.000000]  [mem 0x1f2000000-0x1f20c3fff] page 4k
> [    0.000000] BRK [0x01cd2000, 0x01cd2fff] PGTABLE
> [    0.000000] BRK [0x01cd3000, 0x01cd3fff] PGTABLE
> [    0.000000] init_memory_mapping: [mem 0x1f0000000-0x1f1ffffff]
> [    0.000000]  [mem 0x1f0000000-0x1f1ffffff] page 4k
> [    0.000000] BRK [0x01cd4000, 0x01cd4fff] PGTABLE
> [    0.000000] BRK [0x01cd5000, 0x01cd5fff] PGTABLE
> [    0.000000] BRK [0x01cd6000, 0x01cd6fff] PGTABLE
> [    0.000000] init_memory_mapping: [mem 0x180000000-0x1efffffff]
> [    0.000000]  [mem 0x180000000-0x1efffffff] page 4k
> [    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
> [    0.000000]  [mem 0x00100000-0x1fffffff] page 4k
> [    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
> [    0.000000]  [mem 0x20200000-0x3fffffff] page 4k
> [    0.000000] init_memory_mapping: [mem 0x40200000-0xbad7ffff]
> [    0.000000]  [mem 0x40200000-0xbad7ffff] page 4k
> [    0.000000] init_memory_mapping: [mem 0xbadf4000-0xbadf5fff]
> [    0.000000]  [mem 0xbadf4000-0xbadf5fff] page 4k
> [    0.000000] init_memory_mapping: [mem 0xbae7f000-0xbaffffff]
> [    0.000000]  [mem 0xbae7f000-0xbaffffff] page 4k
> [    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
> [    0.000000]  [mem 0x100000000-0x17fffffff] page 4k
> [    0.000000] init_memory_mapping: [mem 0x1f20c4000-0x23fdfffff]
> [    0.000000]  [mem 0x1f20c4000-0x23fdfffff] page 4k

so init_memory_mapping are all done.

> (XEN) d0:v0: unhandled page fault (ec=0000)
> (XEN) Pagetable walk from ffffea000005b2d0:
> (XEN)  L4[0x1d4] = 0000000000000000 ffffffffffffffff
> (XEN) domain_crash_sync called from entry.S
> (XEN) Domain 0 (vcpu#0) crashed on cpu#0:
> (XEN) ----[ Xen-4.1.5-pre  x86_64  debug=y  Tainted:    C ]----
> (XEN) CPU:    0
> (XEN) RIP:    e033:[<ffffffff8103feba>]
> (XEN) RFLAGS: 0000000000000206   EM: 1   CONTEXT: pv guest
> (XEN) rax: ffffea0000000000   rbx: 0000000001a0c000   rcx: 0000000080000000
> (XEN) rdx: 000000000005b2a0   rsi: 0000000001a0c000   rdi: 0000000000000000
> (XEN) rbp: ffffffff81a01dd8   rsp: ffffffff81a01d90   r8:  0000000000000000
> (XEN) r9:  0000000010000001   r10: 0000000000000005   r11: 0000000000100000
> (XEN) r12: 0000000000000000   r13: 0000020000000000   r14: 0000000000000000
> (XEN) r15: 0000000000100000   cr0: 000000008005003b   cr4: 00000000000026f0
> (XEN) cr3: 0000000221a0c000   cr2: ffffea000005b2d0
> (XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
> (XEN) Guest stack trace from rsp=ffffffff81a01d90:
> (XEN)    0000000080000000 0000000000100000 0000000000000000 ffffffff8103feba
> (XEN)    000000010000e030 0000000000010006 ffffffff81a01dd8 000000000000e02b
> (XEN)    0000000000000000 ffffffff81a01e08 ffffffff81042d27 000000023fe00000
> (XEN)    00000001f20c4000 0000020000000000 00000001acac7000 ffffffff81a01e48
> (XEN)    ffffffff81ad2d21 0000000000000000 0000000000000028 0000000040004000
> (XEN)    0000000000000000 0000000000000000 0000000000000000 ffffffff81a01ed8
> (XEN)    ffffffff81ac293f ffffffff81b46900 0000000000000000 0000000000000000
> (XEN)    0000000000000000 ffffffff81a01f00 ffffffff8165fbd1 ffffffff00000010
> (XEN)    ffffffff81a01ee8 ffffffff81a01ea8 0000000000000000 ffffffff81a01ec8
> (XEN)    ffffffffffffffff ffffffff81b46900 0000000000000000 0000000000000000
> (XEN)    0000000000000000 ffffffff81a01f28 ffffffff81abcd62 ffffffff96062000
> (XEN)    ffffffff81cc6000 ffffffff81ccd000 ffffffff81b4f2e0 0000000000000000
> (XEN)    0000000000000000 0000000000000000 0000000000000000 ffffffff81a01f38
> (XEN)    ffffffff81abc5f7 ffffffff81a01ff8 ffffffff81abf0c7 0300000100000032
> (XEN)    0000000000000005 0000000000000000 0000000000000000 0000000000000000
> (XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
> (XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
> (XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
> (XEN)    0000000000000000 819822831fc9cbf5 000206a700100800 0000000000000001
> (XEN)    0000000000000000 0000000000000000 0f00000060c0c748 ccccccccccccc305
> (XEN) Domain 0 crashed: rebooting machine in 5 seconds.
> (XEN) Resetting with ACPI MEMORY or I/O RESET_REG.

can we get kernel trace instead?

>


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux