Support host and device usb modes for the chipidea controller in AR933x.
The controller doesn't support OTG functionality so the platform code
forces one of the modes based on the state of GPIO13 pin at startup.
Signed-off-by: Svetoslav Neykov <svetoslav@xxxxxxxxxxx>
---
arch/mips/ath79/dev-usb.c | 19 ++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 +
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/ci13xxx_ar933x.c | 73 ++++++++++++++++++++++++
4 files changed, 96 insertions(+)
create mode 100644 drivers/usb/chipidea/ci13xxx_ar933x.c
diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c
index bd2bc10..52966b3 100644
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -174,8 +174,27 @@ static void __init ar913x_usb_setup(void)
platform_device_register(&ath79_ehci_device);
}
+static void __init ar933x_usb_setup_ctrl_config(void)
+{
+ void __iomem *usb_ctrl_base, *usb_config_reg;
+ u32 usb_config;
+
+ usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
+ usb_config_reg = usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG;
+ usb_config = __raw_readl(usb_config_reg);
+ usb_config &= ~AR933X_USB_CONFIG_HOST_ONLY;
+ __raw_writel(usb_config, usb_config_reg);
+ iounmap(usb_ctrl_base);
+}
+
static void __init ar933x_usb_setup(void)
{
+ u32 bootstrap;
+
+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ if (!(bootstrap & AR933X_BOOTSTRAP_USB_MODE_HOST))
+ ar933x_usb_setup_ctrl_config();
+
ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
mdelay(10);
diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
index a5e0f17..13eb2d9 100644
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -297,6 +297,7 @@
#define AR934X_RESET_USB_PHY BIT(4)
#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
+#define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3)
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
@@ -315,6 +316,8 @@
#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
#define AR934X_BOOTSTRAP_DDR1 BIT(0)
+#define AR933X_USB_CONFIG_HOST_ONLY BIT(8)
+
#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index d92ca32..196b7b4 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o
# Glue/Bridge layers go here
obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_msm.o
+obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_ar933x.o
# PCI doesn't provide stubs, need to check
ifneq ($(CONFIG_PCI),)
diff --git a/drivers/usb/chipidea/ci13xxx_ar933x.c b/drivers/usb/chipidea/ci13xxx_ar933x.c
new file mode 100644
index 0000000..046a4b6
--- /dev/null
+++ b/drivers/usb/chipidea/ci13xxx_ar933x.c
@@ -0,0 +1,73 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "ci.h"
+
+static struct ci13xxx_platform_data ci13xxx_ar933x_platdata = {
+ .name = "ci13xxx_ar933x",
+ .flags = 0,
+ .capoffset = DEF_CAPOFFSET
+};
+
+static int __devinit ci13xxx_ar933x_probe(struct platform_device *pdev)
+{
+ u32 bootstrap;
+ struct platform_device *plat_ci;
+
+ dev_dbg(&pdev->dev, "ci13xxx_ar933x_probe\n");
+
+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ if (bootstrap & AR933X_BOOTSTRAP_USB_MODE_HOST)
+ ci13xxx_ar933x_platdata.flags = CI13XXX_FORCE_HOST_MODE;
+ else
+ ci13xxx_ar933x_platdata.flags = CI13XXX_FORCE_DEVICE_MODE;
+
+ plat_ci = ci13xxx_add_device(&pdev->dev,
+ pdev->resource, pdev->num_resources,
+ &ci13xxx_ar933x_platdata);
+ if (IS_ERR(plat_ci)) {
+ dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
+ return PTR_ERR(plat_ci);
+ }
+
+ platform_set_drvdata(pdev, plat_ci);
+
+ pm_runtime_no_callbacks(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+}
+
+static int __devexit ci13xxx_ar933x_remove(struct platform_device *pdev)
+{
+ struct platform_device *plat_ci = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+ ci13xxx_remove_device(plat_ci);
+
+ return 0;
+}
+
+static struct platform_driver ci13xxx_ar933x_driver = {
+ .probe = ci13xxx_ar933x_probe,
+ .remove = __devexit_p(ci13xxx_ar933x_remove),
+ .driver = { .name = "ehci-platform", },
+};
+
+module_platform_driver(ci13xxx_ar933x_driver);
+
+MODULE_ALIAS("platform:ar933x_hsusb");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
