Signed-off-by: Sanjay Lal <sanjayl@xxxxxxxxxxx> --- arch/mips/kvm/00README.txt | 31 +++++++++++++++++++++++++++++++ arch/mips/kvm/Makefile | 17 +++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/mips/kvm/00README.txt create mode 100644 arch/mips/kvm/Makefile diff --git a/arch/mips/kvm/00README.txt b/arch/mips/kvm/00README.txt new file mode 100644 index 0000000..daaf280 --- /dev/null +++ b/arch/mips/kvm/00README.txt @@ -0,0 +1,31 @@ +KVM/MIPS Trap & Emulate Release Notes +===================================== + +(1) KVM/MIPS should support MIPS32R2 and beyond. It has been tested on the following platforms: + Malta Board with FPGA based 34K + Sigma Designs TangoX board with a 24K based 8654 SoC. + Malta Board with 74K @ 1GHz + +(2) Both Guest kernel and Guest Userspace execute in UM. + Guest User address space: 0x00000000 -> 0x40000000 + Guest Kernel Unmapped: 0x40000000 -> 0x60000000 + Guest Kernel Mapped: 0x60000000 -> 0x80000000 + + Guest Usermode virtual memory is limited to 1GB. + +(2) 16K Page Sizes: Both Host Kernel and Guest Kernel should have the same page size, currently at least 16K. + Note that due to cache aliasing issues, 4K page sizes are NOT supported. + +(3) No HugeTLB Support + Both the host kernel and Guest kernel should have the page size set to 16K. + This will be implemented in a future release. + +(4) KVM/MIPS does not have support for SMP Guests + Linux-3.7-rc2 based SMP guest hangs due to the following code sequence in the generated TLB handlers: + LL/TLBP/SC. Since the TLBP instruction causes a trap the reservation gets cleared + when we ERET back to the guest. This causes the guest to hang in an infinite loop. + This will be fixed in a future release. + +(5) Use Host FPU + Currently KVM/MIPS emulates a 24K CPU without a FPU. + This will be fixed in a future release diff --git a/arch/mips/kvm/Makefile b/arch/mips/kvm/Makefile new file mode 100644 index 0000000..f3ed378 --- /dev/null +++ b/arch/mips/kvm/Makefile @@ -0,0 +1,17 @@ +# Makefile for KVM support for MIPS +# + +common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o) + +EXTRA_CFLAGS += -Ivirt/kvm -Iarch/mips/kvm + +kvm-objs := $(common-objs) kvm_mips.o kvm_mips_emul.o kvm_locore.o kvm_mips_int.o \ + kvm_mips_stats.o kvm_mips_commpage.o kvm_mips_dyntrans.o + +ifdef CONFIG_KVM_MIPS_VZ +kvm-objs += kvm_vz.o +else +kvm-objs += kvm_trap_emul.o +endif +obj-$(CONFIG_KVM) += kvm.o +obj-y += kvm_tlb.o kvm_cb.o -- 1.7.11.3
