Loongson family machines has three types of serial port: PCI UART, LPC
UART and CPU internal UART. Loongson-2E and parts of Loongson-2F based
machines use PCI UART; most Loongson-2F based machines use LPC UART;
Loongson-2G/3A has both LPC and CPU UART but usually use CPU UART.
Port address of UARTs:
CPU UART: REG_BASE + OFFSET;
LPC UART: LIO1_BASE + OFFSET;
PCI UART: PCIIO_BASE + OFFSET.
Since LPC UART are linked in "Local Bus", both CPU UART and LPC UART
are called "CPU provided serial port".
Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx>
Signed-off-by: Hua Yan <yanh@xxxxxxxxxx>
---
arch/mips/loongson/common/serial.c | 26 +++++++++++++++-----------
arch/mips/loongson/common/uart_base.c | 9 ++++++++-
2 files changed, 23 insertions(+), 12 deletions(-)
diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c
index 7580873..59c76b5 100644
--- a/arch/mips/loongson/common/serial.c
+++ b/arch/mips/loongson/common/serial.c
@@ -19,19 +19,19 @@
#include <loongson.h>
#include <machine.h>
-#define PORT(int) \
+#define PORT(int, clk) \
{ \
.irq = int, \
- .uartclk = 1843200, \
+ .uartclk = clk, \
.iotype = UPIO_PORT, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
.regshift = 0, \
}
-#define PORT_M(int) \
+#define PORT_M(int, clk) \
{ \
.irq = MIPS_CPU_IRQ_BASE + (int), \
- .uartclk = 3686400, \
+ .uartclk = clk, \
.iotype = UPIO_MEM, \
.membase = (void __iomem *)NULL, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
@@ -40,13 +40,17 @@
static struct plat_serial8250_port uart8250_data[][2] = {
[MACH_LOONGSON_UNKNOWN] {},
- [MACH_LEMOTE_FL2E] {PORT(4), {} },
- [MACH_LEMOTE_FL2F] {PORT(3), {} },
- [MACH_LEMOTE_ML2F7] {PORT_M(3), {} },
- [MACH_LEMOTE_YL2F89] {PORT_M(3), {} },
- [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} },
- [MACH_LEMOTE_NAS] {PORT_M(3), {} },
- [MACH_LEMOTE_LL2F] {PORT(3), {} },
+ [MACH_LEMOTE_FL2E] {PORT(4, 1843200), {} },
+ [MACH_LEMOTE_FL2F] {PORT(3, 1843200), {} },
+ [MACH_LEMOTE_ML2F7] {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_YL2F89] {PORT_M(3, 3686400), {} },
+ [MACH_DEXXON_GDIUM2F10] {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_NAS] {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_LL2F] {PORT(3, 1843200), {} },
+ [MACH_LEMOTE_A1004] {PORT_M(2, 33177600), {} },
+ [MACH_LEMOTE_A1101] {PORT_M(2, 25000000), {} },
+ [MACH_LEMOTE_A1201] {PORT_M(2, 25000000), {} },
+ [MACH_LEMOTE_A1205] {PORT_M(2, 25000000), {} },
[MACH_LOONGSON_END] {},
};
diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c
index d69ea54..ea8b501 100644
--- a/arch/mips/loongson/common/uart_base.c
+++ b/arch/mips/loongson/common/uart_base.c
@@ -35,9 +35,16 @@ void prom_init_loongson_uart_base(void)
case MACH_DEXXON_GDIUM2F10:
case MACH_LEMOTE_NAS:
default:
- /* The CPU provided serial port */
+ /* The CPU provided serial port (LPC) */
loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8;
break;
+ case MACH_LEMOTE_A1004:
+ case MACH_LEMOTE_A1101:
+ case MACH_LEMOTE_A1201:
+ case MACH_LEMOTE_A1205:
+ /* The CPU provided serial port (CPU) */
+ loongson_uart_base = LOONGSON_REG_BASE + 0x1e0;
+ break;
}
_loongson_uart_base =
--
1.7.7.3
