The internal GPHYs need a firmware blob to function properly. This patch adds
the code needed to request the blob and load it to the PHY.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
---
arch/mips/lantiq/Kconfig | 4 ++
arch/mips/lantiq/xway/Makefile | 2 +
arch/mips/lantiq/xway/xrx200_phy_fw.c | 97 +++++++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
create mode 100644 arch/mips/lantiq/xway/xrx200_phy_fw.c
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index d84f361..c002191 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -36,4 +36,8 @@ config PCI_LANTIQ
bool "PCI Support"
depends on SOC_XWAY && PCI
+config XRX200_PHY_FW
+ bool "XRX200 PHY firmware loader"
+ depends on SOC_XWAY
+
endif
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 70a58c7..7a13660 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1 +1,3 @@
obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
+
+obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c
new file mode 100644
index 0000000..fe808bf
--- /dev/null
+++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c
@@ -0,0 +1,97 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/of_platform.h>
+
+#include <lantiq_soc.h>
+
+#define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
+static dma_addr_t xway_gphy_load(struct platform_device *pdev)
+{
+ const struct firmware *fw;
+ dma_addr_t dev_addr = 0;
+ const char *fw_name;
+ void *fw_addr;
+ size_t size;
+
+ if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
+ dev_err(&pdev->dev, "failed to load firmware filename\n");
+ return 0;
+ }
+
+ dev_info(&pdev->dev, "requesting %s\n", fw_name);
+ if (request_firmware(&fw, fw_name, &pdev->dev)) {
+ dev_err(&pdev->dev, "failed to load firmware: %s\n", fw_name);
+ return 0;
+ }
+
+ /*
+ * GPHY cores need the firmware code in a persistent and contiguous
+ * memory area with a 16 kB boundary aligned start address
+ */
+ size = fw->size + XRX200_GPHY_FW_ALIGN;
+
+ fw_addr = dma_alloc_coherent(&pdev->dev, size, &dev_addr, GFP_KERNEL);
+ if (fw_addr) {
+ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
+ dev_addr = ALIGN(dev_addr, XRX200_GPHY_FW_ALIGN);
+ memcpy(fw_addr, fw->data, fw->size);
+ } else {
+ dev_err(&pdev->dev, "failed to alloc firmware memory\n");
+ }
+
+ release_firmware(fw);
+ return dev_addr;
+}
+
+static int __devinit xway_phy_fw_probe(struct platform_device *pdev)
+{
+ dma_addr_t fw_addr;
+ struct property *pp;
+ unsigned char *phyids;
+ int i, ret = 0;
+
+ fw_addr = xway_gphy_load(pdev);
+ if (!fw_addr)
+ return -EINVAL;
+ pp = of_find_property(pdev->dev.of_node, "phys", NULL);
+ if (!pp)
+ return -ENOENT;
+ phyids = pp->value;
+ for (i = 0; i < pp->length && !ret; i++)
+ ret = xrx200_gphy_boot(&pdev->dev, phyids[i], fw_addr);
+ if (!ret)
+ mdelay(100);
+ return ret;
+}
+
+static const struct of_device_id xway_phy_match[] = {
+ { .compatible = "lantiq,phy-xrx200" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, xway_phy_match);
+
+static struct platform_driver xway_phy_driver = {
+ .probe = xway_phy_fw_probe,
+ .driver = {
+ .name = "phy-xrx200",
+ .owner = THIS_MODULE,
+ .of_match_table = xway_phy_match,
+ },
+};
+
+module_platform_driver(xway_phy_driver);
+
+MODULE_AUTHOR("John Crispin <blogic@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Lantiq XRX200 PHY Firmware Loader");
+MODULE_LICENSE("GPL");
--
1.7.10.4
