This same issue below happens to me in 3.5.7 too. So, the change is somewhere
between 3.4 and 3.5.
Regards,
Lluís.
On Mon, Nov 05, 2012 at 12:21:19AM +0100, Lluís Batlle i Rossell wrote:
> I've investigated better the issue.
>
> I found that, in 3.4 vs 3.6.4, the behaviour that changed is that of readdir().
>
> Using the same userland binaries, I've run a little program in both kernels:
> -------- prova.c
> #include <sys/types.h>
> #include <dirent.h>
>
> int main() {
> DIR *d = opendir("/etc/init");
>
> if (d == NULL) {
> fprintf(stderr, "d NULL\n");
> return -1;
> }
>
> struct dirent *ent;
> ent = readdir(d);
>
> if (ent == NULL) {
> fprintf(stderr, "ent NULL\n");
> return -1;
> }
> }
> -----------
>
>
> This program does not print anything on 3.4, but on 3.6, it prints "ent NULL".
>
> In both cases, /etc/init is full of symlinks, like this (from a script session
> in 3.6.4):
> -------
> S'ha iniciat l'execució de script a dl 05 nov 2012 00:16:53 CET
> sh-4.2# ./prova
> ent NULL
> sh-4.2# ls -ld /etc/init
> drwxr-xr-x 2 root root 4096 5 nov 00:12 /etc/init
> sh-4.2# ls -l /etc/init
> total 0
> lrwxrwxrwx 1 root root 25 5 nov 00:12 atd.conf -> /etc/static/init/atd.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 boot.conf -> /etc/static/init/boot.conf
> lrwxrwxrwx 1 root root 40 5 nov 00:12 control-alt-delete.conf -> /etc/static/init/control-alt-delete.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 cron.conf -> /etc/static/init/cron.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 dbus.conf -> /etc/static/init/dbus.conf
> lrwxrwxrwx 1 root root 28 5 nov 00:12 dhcpcd.conf -> /etc/static/init/dhcpcd.conf
> lrwxrwxrwx 1 root root 37 5 nov 00:12 emergency-shell.conf -> /etc/static/init/emergency-shell.conf
> lrwxrwxrwx 1 root root 37 5 nov 00:12 invalidate-nscd.conf -> /etc/static/init/invalidate-nscd.conf
> lrwxrwxrwx 1 root root 25 5 nov 00:12 kbd.conf -> /etc/static/init/kbd.conf
> lrwxrwxrwx 1 root root 27 5 nov 00:12 klogd.conf -> /etc/static/init/klogd.conf
> lrwxrwxrwx 1 root root 25 5 nov 00:12 lvm.conf -> /etc/static/init/lvm.conf
> lrwxrwxrwx 1 root root 30 5 nov 00:12 mountall.conf -> /etc/static/init/mountall.conf
> lrwxrwxrwx 1 root root 36 5 nov 00:12 mountall-ip-up.conf -> /etc/static/init/mountall-ip-up.conf
> lrwxrwxrwx 1 root root 34 5 nov 00:12 mount-failed.conf -> /etc/static/init/mount-failed.conf
> lrwxrwxrwx 1 root root 32 5 nov 00:12 networking.conf -> /etc/static/init/networking.conf
> lrwxrwxrwx 1 root root 40 5 nov 00:12 network-interfaces.conf -> /etc/static/init/network-interfaces.conf
> lrwxrwxrwx 1 root root 32 5 nov 00:12 nix-daemon.conf -> /etc/static/init/nix-daemon.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 nscd.conf -> /etc/static/init/nscd.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 ntpd.conf -> /etc/static/init/ntpd.conf
> lrwxrwxrwx 1 root root 30 5 nov 00:12 runlevel.conf -> /etc/static/init/runlevel.conf
> lrwxrwxrwx 1 root root 30 5 nov 00:12 shutdown.conf -> /etc/static/init/shutdown.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 sshd.conf -> /etc/static/init/sshd.conf
> lrwxrwxrwx 1 root root 29 5 nov 00:12 syslogd.conf -> /etc/static/init/syslogd.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 tty1.conf -> /etc/static/init/tty1.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 tty2.conf -> /etc/static/init/tty2.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 tty3.conf -> /etc/static/init/tty3.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 tty4.conf -> /etc/static/init/tty4.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 tty5.conf -> /etc/static/init/tty5.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 tty6.conf -> /etc/static/init/tty6.conf
> lrwxrwxrwx 1 root root 26 5 nov 00:12 udev.conf -> /etc/static/init/udev.conf
> lrwxrwxrwx 1 root root 33 5 nov 00:12 udevtrigger.conf -> /etc/static/init/udevtrigger.conf
> sh-4.2# exit
>
> S'ha finalitzat l'execució de script a dl 05 nov 2012 00:17:22 CET
> --------
>
>
>
>
> On Fri, Nov 02, 2012 at 07:38:28PM +0100, Lluís Batlle i Rossell wrote:
> > Hello,
> >
> > updating my kernel from 3.4.2 to 3.6.4, I've noticed that upstart deadlocks at
> > the very start. Stracing, I think it has to do with INOTIFY, because it
> > deadlocks very early and little more has been done then.
> >
> > Going 'back' to 3.4.16, makes upstart work fine. I've not tested middle kernels.
> >
> > I've seen this only on the fuloong minipc (mips n64), but I've done similar
> > steps with the same distributions on armv5tel, i686 and x86_64, and there all
> > works fine.
> >
> > Does anybody know of anything broken around inotify, between 3.4 and 3.6 linux
> > mips?
> >
> > Any suggestion on what kernel change could have related to this, and so, get a
> > clue about what middle version to test?
> >
> > Regards,
> > Lluís.
