Add platform devices for the JZ4750D platform UART drivers.
Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
---
arch/mips/include/asm/mach-jz4750d/platform.h | 22 +++++++
arch/mips/jz4750d/platform.c | 84 +++++++++++++++++++++++++
2 files changed, 106 insertions(+)
create mode 100644 arch/mips/include/asm/mach-jz4750d/platform.h
create mode 100644 arch/mips/jz4750d/platform.c
diff --git a/arch/mips/include/asm/mach-jz4750d/platform.h b/arch/mips/include/asm/mach-jz4750d/platform.h
new file mode 100644
index 0000000..255a165
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4750d/platform.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012, Antony Pavlov <antonynpavlov@xxxxxxxxx>
+ * JZ4750D platform device definitions
+ *
+ * based on JZ4740 platform device definitions
+ * Copyright (C) 2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __JZ4750D_PLATFORM_H__
+#define __JZ4750D_PLATFORM_H__
+
+#include <linux/platform_device.h>
+
+void jz4750d_serial_device_register(void);
+
+#endif /* __JZ4750D_PLATFORM_H__ */
diff --git a/arch/mips/jz4750d/platform.c b/arch/mips/jz4750d/platform.c
new file mode 100644
index 0000000..5ac083d
--- /dev/null
+++ b/arch/mips/jz4750d/platform.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2012, Antony Pavlov <antonynpavlov@xxxxxxxxx>
+ * JZ4750D platform devices
+ *
+ * based on JZ4740 platform devices
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-jz4750d/platform.h>
+#include <asm/mach-jz4750d/base.h>
+#include <asm/mach-jz4750d/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include "serial.h"
+#include "clock.h"
+
+/* Serial */
+#define JZ4750D_UART_DATA(_id) \
+ { \
+ .flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE, \
+ .iotype = UPIO_MEM, \
+ .regshift = 2, \
+ .serial_out = jz4750d_serial_out, \
+ .type = PORT_16550, \
+ .mapbase = JZ4750D_UART ## _id ## _BASE_ADDR, \
+ .irq = JZ4750D_IRQ_UART ## _id, \
+ }
+
+static struct plat_serial8250_port jz4750d_uart_data[] = {
+ JZ4750D_UART_DATA(0),
+ JZ4750D_UART_DATA(1),
+ {},
+};
+
+static struct platform_device jz4750d_uart_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = jz4750d_uart_data,
+ },
+};
+
+#define JZ_REG_CLOCK_CTRL 0x00
+#define JZ_CLOCK_CTRL_KO_ENABLE BIT(30)
+
+void jz4750d_serial_device_register(void)
+{
+ void __iomem *cpm_base = ioremap(JZ4750D_CPM_BASE_ADDR, 0x100);
+ struct plat_serial8250_port *p;
+ int uart_rate;
+
+ uart_rate = jz4750d_clock_bdata.ext_rate;
+
+ /*
+ * FIXME
+ * ECS bit selects the clock source between EXCLK and EXCLK/2 output
+ * This bit is only used to APB device such as UART I2S I2C SSI SADC UDC_PHY etc.
+ */
+
+ if (readl(cpm_base + JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE) {
+ uart_rate >>= 1;
+ }
+
+ for (p = jz4750d_uart_data; p->flags != 0; ++p)
+ p->uartclk = uart_rate;
+
+ platform_device_register(&jz4750d_uart_device);
+}
--
1.7.10.4
