From: Ganesan Ramalingam <ganesanr@xxxxxxxxxxxxxxxxx>
Changes to add support for the boot NOR flash on XLR boards and the
boot NAND/NOR flash drivers on the XLS boards.
Signed-off-by: Ganesan Ramalingam <ganesanr@xxxxxxxxxxxxxxxxx>
Signed-off-by: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
---
arch/mips/include/asm/netlogic/xlr/bridge.h | 104 +++++++++++++
arch/mips/include/asm/netlogic/xlr/flash.h | 55 +++++++
arch/mips/netlogic/xlr/Makefile | 2 +-
arch/mips/netlogic/xlr/platform-flash.c | 220 +++++++++++++++++++++++++++
4 files changed, 380 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/include/asm/netlogic/xlr/bridge.h
create mode 100644 arch/mips/include/asm/netlogic/xlr/flash.h
create mode 100644 arch/mips/netlogic/xlr/platform-flash.c
diff --git a/arch/mips/include/asm/netlogic/xlr/bridge.h b/arch/mips/include/asm/netlogic/xlr/bridge.h
new file mode 100644
index 0000000..2d02428
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/bridge.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ASM_NLM_BRIDGE_H_
+#define _ASM_NLM_BRIDGE_H_
+
+#define BRIDGE_DRAM_0_BAR 0
+#define BRIDGE_DRAM_1_BAR 1
+#define BRIDGE_DRAM_2_BAR 2
+#define BRIDGE_DRAM_3_BAR 3
+#define BRIDGE_DRAM_4_BAR 4
+#define BRIDGE_DRAM_5_BAR 5
+#define BRIDGE_DRAM_6_BAR 6
+#define BRIDGE_DRAM_7_BAR 7
+#define BRIDGE_DRAM_CHN_0_MTR_0_BAR 8
+#define BRIDGE_DRAM_CHN_0_MTR_1_BAR 9
+#define BRIDGE_DRAM_CHN_0_MTR_2_BAR 10
+#define BRIDGE_DRAM_CHN_0_MTR_3_BAR 11
+#define BRIDGE_DRAM_CHN_0_MTR_4_BAR 12
+#define BRIDGE_DRAM_CHN_0_MTR_5_BAR 13
+#define BRIDGE_DRAM_CHN_0_MTR_6_BAR 14
+#define BRIDGE_DRAM_CHN_0_MTR_7_BAR 15
+#define BRIDGE_DRAM_CHN_1_MTR_0_BAR 16
+#define BRIDGE_DRAM_CHN_1_MTR_1_BAR 17
+#define BRIDGE_DRAM_CHN_1_MTR_2_BAR 18
+#define BRIDGE_DRAM_CHN_1_MTR_3_BAR 19
+#define BRIDGE_DRAM_CHN_1_MTR_4_BAR 20
+#define BRIDGE_DRAM_CHN_1_MTR_5_BAR 21
+#define BRIDGE_DRAM_CHN_1_MTR_6_BAR 22
+#define BRIDGE_DRAM_CHN_1_MTR_7_BAR 23
+#define BRIDGE_CFG_BAR 24
+#define BRIDGE_PHNX_IO_BAR 25
+#define BRIDGE_FLASH_BAR 26
+#define BRIDGE_SRAM_BAR 27
+#define BRIDGE_HTMEM_BAR 28
+#define BRIDGE_HTINT_BAR 29
+#define BRIDGE_HTPIC_BAR 30
+#define BRIDGE_HTSM_BAR 31
+#define BRIDGE_HTIO_BAR 32
+#define BRIDGE_HTCFG_BAR 33
+#define BRIDGE_PCIXCFG_BAR 34
+#define BRIDGE_PCIXMEM_BAR 35
+#define BRIDGE_PCIXIO_BAR 36
+#define BRIDGE_DEVICE_MASK 37
+#define BRIDGE_AERR_INTR_LOG1 38
+#define BRIDGE_AERR_INTR_LOG2 39
+#define BRIDGE_AERR_INTR_LOG3 40
+#define BRIDGE_AERR_DEV_STAT 41
+#define BRIDGE_AERR1_LOG1 42
+#define BRIDGE_AERR1_LOG2 43
+#define BRIDGE_AERR1_LOG3 44
+#define BRIDGE_AERR1_DEV_STAT 45
+#define BRIDGE_AERR_INTR_EN 46
+#define BRIDGE_AERR_UPG 47
+#define BRIDGE_AERR_CLEAR 48
+#define BRIDGE_AERR1_CLEAR 49
+#define BRIDGE_SBE_COUNTS 50
+#define BRIDGE_DBE_COUNTS 51
+#define BRIDGE_BITERR_INT_EN 52
+
+#define BRIDGE_SYS2IO_CREDITS 53
+#define BRIDGE_EVNT_CNT_CTRL1 54
+#define BRIDGE_EVNT_COUNTER1 55
+#define BRIDGE_EVNT_CNT_CTRL2 56
+#define BRIDGE_EVNT_COUNTER2 57
+#define BRIDGE_RESERVED1 58
+
+#define BRIDGE_DEFEATURE 59
+#define BRIDGE_SCRATCH0 60
+#define BRIDGE_SCRATCH1 61
+#define BRIDGE_SCRATCH2 62
+#define BRIDGE_SCRATCH3 63
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/flash.h b/arch/mips/include/asm/netlogic/xlr/flash.h
new file mode 100644
index 0000000..f8aca54
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/flash.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ASM_NLM_FLASH_H_
+#define _ASM_NLM_FLASH_H_
+
+#define FLASH_CSBASE_ADDR(cs) (cs)
+#define FLASH_CSADDR_MASK(cs) (0x10 + (cs))
+#define FLASH_CSDEV_PARM(cs) (0x20 + (cs))
+#define FLASH_CSTIME_PARMA(cs) (0x30 + (cs))
+#define FLASH_CSTIME_PARMB(cs) (0x40 + (cs))
+
+#define FLASH_INT_MASK 0x50
+#define FLASH_INT_STATUS 0x60
+#define FLASH_ERROR_STATUS 0x70
+#define FLASH_ERROR_ADDR 0x80
+
+#define FLASH_NAND_CLE(cs) (0x90 + (cs))
+#define FLASH_NAND_ALE(cs) (0xa0 + (cs))
+
+#define FLASH_NAND_CSDEV_PARAM 0x000041e6
+#define FLASH_NAND_CSTIME_PARAMA 0x4f400e22
+#define FLASH_NAND_CSTIME_PARAMB 0x000083cf
+
+#endif
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
index f01e4d7..c287dea 100644
--- a/arch/mips/netlogic/xlr/Makefile
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -1,2 +1,2 @@
-obj-y += setup.o platform.o
+obj-y += setup.o platform.o platform-flash.o
obj-$(CONFIG_SMP) += wakeup.o
diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c
new file mode 100644
index 0000000..340ab16
--- /dev/null
+++ b/arch/mips/netlogic/xlr/platform-flash.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/resource.h>
+#include <linux/spi/flash.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/flash.h>
+#include <asm/netlogic/xlr/bridge.h>
+#include <asm/netlogic/xlr/gpio.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+/*
+ * Default NOR partition layout
+ */
+static struct mtd_partition xlr_nor_parts[] = {
+ {
+ .name = "User FS",
+ .offset = 0x800000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/*
+ * Default NAND partition layout
+ */
+static struct mtd_partition xlr_nand_parts[] = {
+ {
+ .name = "Root Filesystem",
+ .offset = 64 * 64 * 2048,
+ .size = 432 * 64 * 2048,
+ },
+ {
+ .name = "Home Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/* Use PHYSMAP flash for NOR */
+struct physmap_flash_data xlr_nor_data = {
+ .width = 2,
+ .parts = xlr_nor_parts,
+ .nr_parts = ARRAY_SIZE(xlr_nor_parts),
+};
+
+static struct resource xlr_nor_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device xlr_nor_dev = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &xlr_nor_data,
+ },
+ .num_resources = ARRAY_SIZE(xlr_nor_res),
+ .resource = xlr_nor_res,
+};
+
+const char *xlr_part_probes[] = { "cmdlinepart", NULL };
+
+/*
+ * Use "gen_nand" driver for NAND flash
+ *
+ * There seems to be no way to store a private pointer containing
+ * platform specific info in gen_nand drivier. We will use a global
+ * struct for now, since we currently have only one NAND chip per board.
+ */
+struct xlr_nand_flash_priv {
+ int cs;
+ uint64_t flash_mmio;
+};
+
+static struct xlr_nand_flash_priv nand_priv;
+
+static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CLE)
+ nlm_write_reg(nand_priv.flash_mmio,
+ FLASH_NAND_CLE(nand_priv.cs), cmd);
+ else if (ctrl & NAND_ALE)
+ nlm_write_reg(nand_priv.flash_mmio,
+ FLASH_NAND_ALE(nand_priv.cs), cmd);
+}
+
+struct platform_nand_data xlr_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(xlr_nand_parts),
+ .chip_delay = 50,
+ .partitions = xlr_nand_parts,
+ .part_probe_types = xlr_part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = xlr_nand_ctrl,
+ },
+};
+
+static struct resource xlr_nand_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device xlr_nand_dev = {
+ .name = "gen_nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(xlr_nand_res),
+ .resource = xlr_nand_res,
+ .dev = {
+ .platform_data = &xlr_nand_data,
+ }
+};
+
+/*
+ * XLR/XLS supports upto 8 devices on its FLASH interface. The value in
+ * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
+ * flash devices.
+ * Under this, each flash device has an offset and size given by the
+ * CSBASE_ADDR and CSBASE_MASK registers for the device.
+ *
+ * The CSBASE_ registers are expected to be setup by the bootloader.
+ */
+static void setup_flash_resource(uint64_t flash_mmio,
+ uint64_t flash_map_base, int cs, struct resource *res)
+{
+ u32 base, mask;
+
+ base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
+ mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
+
+ res->start = flash_map_base + ((unsigned long)base << 16);
+ res->end = res->start + (mask + 1) * 64 * 1024;
+}
+
+static int __init xlr_flash_init(void)
+{
+ uint64_t gpio_mmio, flash_mmio, flash_map_base;
+ u32 gpio_resetcfg, flash_bar;
+ int cs, boot_nand, boot_nor;
+
+ /* Flash address bits 39:24 is in bridge flash BAR */
+ flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
+ flash_map_base = (flash_bar & 0xffff0000) << 8;
+
+ gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+ flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
+
+ /* Get the chip reset config */
+ gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
+
+ /* Check for boot flash type */
+ boot_nor = boot_nand = 0;
+ if (nlm_chip_is_xls()) {
+ /* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
+ if (gpio_resetcfg & (1 << 16))
+ boot_nand = 1;
+
+ /* check boot from PCMCIA, (GPIO reset reg bit 15 */
+ if ((gpio_resetcfg & (1 << 15)) == 0)
+ boot_nor = 1; /* not set, booted from NOR */
+ } else { /* XLR */
+ /* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
+ if ((gpio_resetcfg & (1 << 16)) == 0)
+ boot_nor = 1; /* not set, booted from NOR */
+ }
+
+ /* boot flash at chip select 0 */
+ cs = 0;
+
+ if (boot_nand) {
+ nand_priv.cs = cs;
+ nand_priv.flash_mmio = flash_mmio;
+ setup_flash_resource(flash_mmio, flash_map_base, cs,
+ xlr_nand_res);
+
+ /* Initialize NAND flash at CS 0 */
+ nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
+ FLASH_NAND_CSDEV_PARAM);
+ nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
+ FLASH_NAND_CSTIME_PARAMA);
+ nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
+ FLASH_NAND_CSTIME_PARAMB);
+
+ pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
+ return platform_device_register(&xlr_nand_dev);
+ }
+
+ if (boot_nor) {
+ setup_flash_resource(flash_mmio, flash_map_base, cs,
+ xlr_nor_res);
+ pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
+ return platform_device_register(&xlr_nor_dev);
+ }
+ return 0;
+}
+
+arch_initcall(xlr_flash_init);
--
1.7.9.5
