The Ubiquiti XM board setup code uses an invalid
IRQ number, because it if above of NR_IRQS. This
leads to failed 'request_irq' calls:
ath9k 0000:00:00.0: request_irq failed
ath9k: probe of 0000:00:00.0 failed with error -22
Preserve some IRQ numbers for the built-in IRQ
controller of PCI host controllers in the
AR71XX/AR724X SoCs, and use the correct IRQ
number in the board setup code.
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
v3: - no changes
v2: - no changes
The IRQ controller code is also missing, that will be
added in a separate patch.
arch/mips/ath79/mach-ubnt-xm.c | 5 +++--
arch/mips/include/asm/mach-ath79/irq.h | 6 +++++-
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/mips/ath79/mach-ubnt-xm.c b/arch/mips/ath79/mach-ubnt-xm.c
index 3266ee0..0d95b67 100644
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -17,6 +17,8 @@
#include <linux/ath9k_platform.h>
#endif /* CONFIG_PCI */
+#include <asm/mach-ath79/irq.h>
+
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
@@ -33,7 +35,6 @@
#define UBNT_XM_KEYS_POLL_INTERVAL 20
#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-#define UBNT_XM_PCI_IRQ 48
#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
@@ -86,7 +87,7 @@ static struct ath9k_platform_data ubnt_xm_eeprom_data;
static struct ar724x_pci_data ubnt_xm_pci_data[] = {
{
- .irq = UBNT_XM_PCI_IRQ,
+ .irq = ATH79_PCI_IRQ(0),
.pdata = &ubnt_xm_eeprom_data,
},
};
diff --git a/arch/mips/include/asm/mach-ath79/irq.h b/arch/mips/include/asm/mach-ath79/irq.h
index 519958f..6ae2646 100644
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -10,11 +10,15 @@
#define __ASM_MACH_ATH79_IRQ_H
#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 40
+#define NR_IRQS 46
#define ATH79_MISC_IRQ_BASE 8
#define ATH79_MISC_IRQ_COUNT 32
+#define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
+#define ATH79_PCI_IRQ_COUNT 6
+#define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x))
+
#define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
#define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
--
1.7.2.1
