From: David Daney <david.daney@xxxxxxxxxx> This code has now had extensive testing, it is running on more than 10 different boards and SOC combinations. The patches in this set are all in the arch/mips tree and should probably be merged by Ralf. They do depend on this libfdt patch: http://marc.info/?l=linux-kernel&m=133054335203615 New in v6: o Device Tree bindings updated based on feedback and more actual use. o Use of irq_domain support added to recent kernels. New in v5: o New irq triggering mode constants. o Boot protocol to pass flattened device tree from bootloader. This protocol may change based on attempts to arrive at a common protocol for all MIPS boards. New in v4: o Cleanup and error checking suggested by Sergei Shtylyov. o Use device tree passed by bootloader if present. New in v3: o More updates to device tree bindings, and perhaps more importantly descriptions/definitions of the bindings o Cleanup and style improvements as suggested by Grant Likley. o Omitted all the driver changes, as they are unchanged from the last set, and at this stage the patches are just an RFC. New in v2: o Changed many device tree bindings. They should be closer to the standard naming scheme now. o Editing of the template device tree is done in the flattened form using libfdt. o Standard platform driver functions used in preference to the of_platform variety. v1: Background: The Octeon family of SOCs has a variety of on-chip controllers for Ethernet, MDIO, I2C, and several other I/O devices. These chips are used on boards with a great variety of different configurations. To date, the configuration and bus topology information has been hard coded in the drivers and support code. To facilitate supporting new chips and boards, we are using the Device Tree to encode the configuration information. The migration from the legacy approach to the device tree is as follows: o A device tree template is statically linked into the kernel image. Based on SOC type and board type, legacy configuration probing code is used to prune and patch the device tree template. o New SOCs and boards will directly use a device tree passed by the bootloader. David Daney (5): MIPS: Octeon: Add device tree source files. MIPS: Don't define early_init_devtree() and device_tree_init() in prom.c for CPU_CAVIUM_OCTEON MIPS: Octeon: Add irq handlers for GPIO interrupts. MIPS: Octeon: Setup irq_domains for interrupts. MIPS: Octeon: Initialize and fixup device tree. .../bindings/ata/cavium-compact-flash.txt | 30 + .../bindings/gpio/cavium-octeon-gpio.txt | 48 ++ .../devicetree/bindings/i2c/cavium-i2c.txt | 34 ++ .../devicetree/bindings/mips/cavium/bootbus.txt | 126 ++++ .../devicetree/bindings/mips/cavium/ciu.txt | 26 + .../devicetree/bindings/mips/cavium/ciu2.txt | 27 + .../devicetree/bindings/mips/cavium/dma-engine.txt | 21 + .../devicetree/bindings/mips/cavium/uctl.txt | 47 ++ .../devicetree/bindings/net/cavium-mdio.txt | 27 + .../devicetree/bindings/net/cavium-mix.txt | 40 ++ .../devicetree/bindings/net/cavium-pip.txt | 98 +++ .../devicetree/bindings/serial/cavium-uart.txt | 19 + arch/mips/Kconfig | 3 + arch/mips/cavium-octeon/.gitignore | 2 + arch/mips/cavium-octeon/Makefile | 16 + arch/mips/cavium-octeon/octeon-irq.c | 395 +++++++++++-- arch/mips/cavium-octeon/octeon-platform.c | 523 ++++++++++++++++- arch/mips/cavium-octeon/octeon_3xxx.dts | 571 ++++++++++++++++++ arch/mips/cavium-octeon/octeon_68xx.dts | 625 ++++++++++++++++++++ arch/mips/cavium-octeon/setup.c | 45 ++ arch/mips/kernel/prom.c | 2 + 21 files changed, 2661 insertions(+), 64 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/cavium-compact-flash.txt create mode 100644 Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt create mode 100644 Documentation/devicetree/bindings/i2c/cavium-i2c.txt create mode 100644 Documentation/devicetree/bindings/mips/cavium/bootbus.txt create mode 100644 Documentation/devicetree/bindings/mips/cavium/ciu.txt create mode 100644 Documentation/devicetree/bindings/mips/cavium/ciu2.txt create mode 100644 Documentation/devicetree/bindings/mips/cavium/dma-engine.txt create mode 100644 Documentation/devicetree/bindings/mips/cavium/uctl.txt create mode 100644 Documentation/devicetree/bindings/net/cavium-mdio.txt create mode 100644 Documentation/devicetree/bindings/net/cavium-mix.txt create mode 100644 Documentation/devicetree/bindings/net/cavium-pip.txt create mode 100644 Documentation/devicetree/bindings/serial/cavium-uart.txt create mode 100644 arch/mips/cavium-octeon/.gitignore create mode 100644 arch/mips/cavium-octeon/octeon_3xxx.dts create mode 100644 arch/mips/cavium-octeon/octeon_68xx.dts -- 1.7.2.3
