This patch series adds an EHCI and an OHCI driver for bcma and ssb based SoCs. These SoCs provide one device with two address spaces one for the OHCI and one for the EHCI part. The USB controllers are using the same interface as an PCI controller. This patch series is based on the mips Linux tree. It was in OpenWrt for some time and it was reviewed by George Kashperko recently. Hauke Mehrtens (7): bcma: scan for extra address space bcma: add function to check every 10 us if a reg is set USB: OHCI: Add a generic platform device driver USB: EHCI: Add a generic platform device driver USB: Add driver for the bcma bus USB: Add driver for the ssb bus USB: OHCI: remove old SSB OHCI driver drivers/bcma/core.c | 52 ++++--- drivers/bcma/scan.c | 18 ++- drivers/usb/host/Kconfig | 57 ++++++-- drivers/usb/host/Makefile | 2 + drivers/usb/host/bcma-hcd.c | 307 ++++++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-hcd.c | 5 + drivers/usb/host/ehci-platform.c | 211 ++++++++++++++++++++++++++ drivers/usb/host/ohci-hcd.c | 26 +--- drivers/usb/host/ohci-platform.c | 193 ++++++++++++++++++++++++ drivers/usb/host/ohci-ssb.c | 260 -------------------------------- drivers/usb/host/ssb-hcd.c | 270 +++++++++++++++++++++++++++++++++ include/linux/bcma/bcma.h | 4 + 12 files changed, 1089 insertions(+), 316 deletions(-) create mode 100644 drivers/usb/host/bcma-hcd.c create mode 100644 drivers/usb/host/ehci-platform.c create mode 100644 drivers/usb/host/ohci-platform.c delete mode 100644 drivers/usb/host/ohci-ssb.c create mode 100644 drivers/usb/host/ssb-hcd.c -- 1.7.5.4
