Re: [rtc-linux] [PATCH] MIPS: Add RTC support for loongson1B

[zhao zhang <zhzhl555@xxxxxxxxx>]

sorry, i didn't see the rule in that Makefile. 

the loongson1B SOC has the alarm,irq. but that's my next plan.
i am adding other IP's support for this SOC right now.

在 2011年12月5日 下午11:53，Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>写道：

On 16:44 Thu 01 Dec     , zhzhl555@xxxxxxxxx wrote:
> From: zhao zhang <zhzhl555@xxxxxxxxx>
>
> V2: use new module_platform_driver macro.
> thanks for Wolfram's advice.
>
> This patch adds RTC support(TOY counter0) for loongson1B.
> Signed-off-by: zhao zhang <zhzhl555@xxxxxxxxx>
> ---
>  drivers/rtc/Kconfig    |   10 ++
>  drivers/rtc/Makefile   |    1 +
>  drivers/rtc/rtc-ls1x.c |  214 ++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 225 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/rtc/rtc-ls1x.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 5a538fc..6f8c2d7 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1070,4 +1070,14 @@ config RTC_DRV_PUV3
>         This drive can also be built as a module. If so, the module
>         will be called rtc-puv3.
>
> +config RTC_DRV_LOONGSON1
> +     tristate "loongson1 RTC support"
> +     depends on MACH_LOONGSON1
> +     help
> +       This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year
> +       counter) to be used as a RTC.
> +
> +       This driver can also be built as a module. If so, the module
> +       will be called rtc-ls1x.
> +
>  endif # RTC_CLASS
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index 6e69823..48153fe 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -109,3 +109,4 @@ obj-$(CONFIG_RTC_DRV_VT8500)      += rtc-vt8500.o
>  obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm831x.o
>  obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o
>  obj-$(CONFIG_RTC_DRV_X1205)  += rtc-x1205.o
> +obj-$(CONFIG_RTC_DRV_LOONGSON1)      += rtc-ls1x.o

keep it ordered


you have no alarm, irq on this hardware?

Best Regards,
J.