Re: [PATCH V4 2/4] MIPS: Add board support for Loongson1B

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Changelog:

V4:
    1. Split the RTC patch, and merge the arch/mips bits into patch 2/4.
    2. Use 'KSEG1ADDR' instead of 'ioremap()' in registers definitions.

2011/11/21, Kelvin Cheung <keguang.zhang@xxxxxxxxx>:
> This patch adds basic platform devices for Loongson1B,
> including serial port, ethernet, rtc and interrupt handler.
>
> Loongson1B UART is compatible with NS16550A.
> Loongson1B GMAC is built around Synopsys IP Core.
>
> Use normal descriptor instead of enhanced descriptor.
> Thanks to Giuseppe for updating the normal descriptor
> in stmmac driver.
>
> Thanks to Zhao Zhang for implementing the RTC driver.
>
> Signed-off-by: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
> ---
>  arch/mips/include/asm/mach-loongson1/irq.h       |   68 +++++++++
>  arch/mips/include/asm/mach-loongson1/loongson1.h |   44 ++++++
>  arch/mips/include/asm/mach-loongson1/platform.h  |   22 +++
>  arch/mips/include/asm/mach-loongson1/prom.h      |   24 +++
>  arch/mips/include/asm/mach-loongson1/regs-clk.h  |   33 +++++
>  arch/mips/include/asm/mach-loongson1/regs-wdt.h  |   22 +++
>  arch/mips/include/asm/mach-loongson1/war.h       |   25 ++++
>  arch/mips/loongson1/common/clock.c               |  165
> ++++++++++++++++++++++
>  arch/mips/loongson1/common/irq.c                 |  146 +++++++++++++++++++
>  arch/mips/loongson1/common/platform.c            |   98 +++++++++++++
>  arch/mips/loongson1/common/prom.c                |   87 ++++++++++++
>  arch/mips/loongson1/common/reset.c               |   45 ++++++
>  arch/mips/loongson1/common/setup.c               |   29 ++++
>  arch/mips/loongson1/ls1b/board.c                 |   32 ++++
>  14 files changed, 840 insertions(+), 0 deletions(-)
>  create mode 100644 arch/mips/include/asm/mach-loongson1/irq.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/loongson1.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/platform.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/prom.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/regs-clk.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/regs-wdt.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/war.h
>  create mode 100644 arch/mips/loongson1/common/clock.c
>  create mode 100644 arch/mips/loongson1/common/irq.c
>  create mode 100644 arch/mips/loongson1/common/platform.c
>  create mode 100644 arch/mips/loongson1/common/prom.c
>  create mode 100644 arch/mips/loongson1/common/reset.c
>  create mode 100644 arch/mips/loongson1/common/setup.c
>  create mode 100644 arch/mips/loongson1/ls1b/board.c
>
> diff --git a/arch/mips/include/asm/mach-loongson1/irq.h
> b/arch/mips/include/asm/mach-loongson1/irq.h
> new file mode 100644
> index 0000000..762bd2b
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/irq.h
> @@ -0,0 +1,68 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * IRQ mappings for Loongson1.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_IRQ_H
> +#define __ASM_MACH_LOONGSON1_IRQ_H
> +
> +/*
> + * CPU core Interrupt Numbers
> + */
> +#define MIPS_CPU_IRQ_BASE		0
> +#define MIPS_CPU_IRQ(x)			(MIPS_CPU_IRQ_BASE + (x))
> +#define SOFTINT0_IRQ			MIPS_CPU_IRQ(0)
> +#define SOFTINT1_IRQ			MIPS_CPU_IRQ(1)
> +#define INT0_IRQ			MIPS_CPU_IRQ(2)
> +#define INT1_IRQ			MIPS_CPU_IRQ(3)
> +#define INT2_IRQ			MIPS_CPU_IRQ(4)
> +#define INT3_IRQ			MIPS_CPU_IRQ(5)
> +#define INT4_IRQ			MIPS_CPU_IRQ(6)
> +#define TIMER_IRQ			MIPS_CPU_IRQ(7)		/* cpu timer */
> +
> +/*
> + * INT0~3 Interrupt Numbers
> + */
> +#define LS1X_IRQ_BASE			8
> +#define LS1X_IRQ(n, x)			(LS1X_IRQ_BASE + (n << 5) + (x))
> +
> +#define LS1X_UART0_IRQ			LS1X_IRQ(0, 2)
> +#define LS1X_UART1_IRQ			LS1X_IRQ(0, 3)
> +#define LS1X_UART2_IRQ			LS1X_IRQ(0, 4)
> +#define LS1X_UART3_IRQ			LS1X_IRQ(0, 5)
> +#define LS1X_CAN0_IRQ			LS1X_IRQ(0, 6)
> +#define LS1X_CAN1_IRQ			LS1X_IRQ(0, 7)
> +#define LS1X_SPI0_IRQ			LS1X_IRQ(0, 8)
> +#define LS1X_SPI1_IRQ			LS1X_IRQ(0, 9)
> +#define LS1X_AC97_IRQ			LS1X_IRQ(0, 10)
> +#define LS1X_DMA0_IRQ			LS1X_IRQ(0, 13)
> +#define LS1X_DMA1_IRQ			LS1X_IRQ(0, 14)
> +#define LS1X_DMA2_IRQ			LS1X_IRQ(0, 15)
> +#define LS1X_PWM0_IRQ			LS1X_IRQ(0, 17)
> +#define LS1X_PWM1_IRQ			LS1X_IRQ(0, 18)
> +#define LS1X_PWM2_IRQ			LS1X_IRQ(0, 19)
> +#define LS1X_PWM3_IRQ			LS1X_IRQ(0, 20)
> +#define LS1X_RTC_INT0_IRQ		LS1X_IRQ(0, 21)
> +#define LS1X_RTC_INT1_IRQ		LS1X_IRQ(0, 22)
> +#define LS1X_RTC_INT2_IRQ		LS1X_IRQ(0, 23)
> +#define LS1X_TOY_INT0_IRQ		LS1X_IRQ(0, 24)
> +#define LS1X_TOY_INT1_IRQ		LS1X_IRQ(0, 25)
> +#define LS1X_TOY_INT2_IRQ		LS1X_IRQ(0, 26)
> +#define LS1X_RTC_TICK_IRQ		LS1X_IRQ(0, 27)
> +#define LS1X_TOY_TICK_IRQ		LS1X_IRQ(0, 28)
> +
> +#define LS1X_EHCI_IRQ			LS1X_IRQ(1, 0)
> +#define LS1X_OHCI_IRQ			LS1X_IRQ(1, 1)
> +#define LS1X_GMAC0_IRQ			LS1X_IRQ(1, 2)
> +#define LS1X_GMAC1_IRQ			LS1X_IRQ(1, 3)
> +
> +#define NR_IRQS				LS1X_GMAC1_IRQ
> +
> +#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h
> b/arch/mips/include/asm/mach-loongson1/loongson1.h
> new file mode 100644
> index 0000000..0440627
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
> @@ -0,0 +1,44 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Register mappings for Loongson1.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
> +#define __ASM_MACH_LOONGSON1_LOONGSON1_H
> +
> +#define DEFAULT_MEMSIZE			256	/* If no memsize provided */
> +
> +/* Loongson1 Register Bases */
> +#define LS1X_INTC_BASE			0x1fd01040
> +#define LS1X_EHCI_BASE			0x1fe00000
> +#define LS1X_OHCI_BASE			0x1fe08000
> +#define LS1X_GMAC0_BASE			0x1fe10000
> +#define LS1X_GMAC1_BASE			0x1fe20000
> +
> +#define LS1X_UART0_BASE			0x1fe40000
> +#define LS1X_UART1_BASE			0x1fe44000
> +#define LS1X_UART2_BASE			0x1fe48000
> +#define LS1X_UART3_BASE			0x1fe4c000
> +#define LS1X_CAN0_BASE			0x1fe50000
> +#define LS1X_CAN1_BASE			0x1fe54000
> +#define LS1X_I2C0_BASE			0x1fe58000
> +#define LS1X_I2C1_BASE			0x1fe68000
> +#define LS1X_I2C2_BASE			0x1fe70000
> +#define LS1X_PWM_BASE			0x1fe5c000
> +#define LS1X_WDT_BASE			0x1fe5c060
> +#define LS1X_RTC_BASE			0x1fe64000
> +#define LS1X_AC97_BASE			0x1fe74000
> +#define LS1X_NAND_BASE			0x1fe78000
> +#define LS1X_CLK_BASE			0x1fe78030
> +
> +#include <regs-clk.h>
> +#include <regs-wdt.h>
> +
> +#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/platform.h
> b/arch/mips/include/asm/mach-loongson1/platform.h
> new file mode 100644
> index 0000000..327df09
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/platform.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
> +#define __ASM_MACH_LOONGSON1_PLATFORM_H
> +
> +#include <linux/platform_device.h>
> +
> +extern struct platform_device ls1x_uart_device;
> +extern struct platform_device ls1x_eth0_device;
> +extern struct platform_device ls1x_rtc_device;
> +
> +void ls1x_serial_setup(void);
> +
> +#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/prom.h
> b/arch/mips/include/asm/mach-loongson1/prom.h
> new file mode 100644
> index 0000000..b871dc4
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/prom.h
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_PROM_H
> +#define __ASM_MACH_LOONGSON1_PROM_H
> +
> +#include <linux/io.h>
> +#include <linux/init.h>
> +#include <linux/irq.h>
> +
> +/* environment arguments from bootloader */
> +extern unsigned long memsize, highmemsize;
> +
> +/* loongson-specific command line, env and memory initialization */
> +extern char *prom_getenv(char *name);
> +extern void __init prom_init_cmdline(void);
> +
> +#endif /* __ASM_MACH_LOONGSON1_PROM_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h
> b/arch/mips/include/asm/mach-loongson1/regs-clk.h
> new file mode 100644
> index 0000000..5b9635a
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
> @@ -0,0 +1,33 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Loongson1 Clock Register Definitions.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
> +#define __ASM_MACH_LOONGSON1_REGS_CLK_H
> +
> +#define LS1X_CLK_REG(x) \
> +		((void __iomem *)KSEG1ADDR(LS1X_CLK_BASE + (x)))
> +
> +#define LS1X_CLK_PLL_FREQ		LS1X_CLK_REG(0x0)
> +#define LS1X_CLK_PLL_DIV		LS1X_CLK_REG(0x4)
> +
> +/* Clock PLL Divisor Register Bits */
> +#define DIV_DC_EN			(0x1 << 31)
> +#define DIV_DC				(0x1f << 26)
> +#define DIV_CPU_EN			(0x1 << 25)
> +#define DIV_CPU				(0x1f << 20)
> +#define DIV_DDR_EN			(0x1 << 19)
> +#define DIV_DDR				(0x1f << 14)
> +
> +#define DIV_DC_SHIFT			26
> +#define DIV_CPU_SHIFT			20
> +#define DIV_DDR_SHIFT			14
> +
> +#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h
> b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
> new file mode 100644
> index 0000000..d339fe7
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Loongson1 Watchdog register definitions.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
> +#define __ASM_MACH_LOONGSON1_REGS_WDT_H
> +
> +#define LS1X_WDT_REG(x) \
> +		((void __iomem *)KSEG1ADDR(LS1X_WDT_BASE + (x)))
> +
> +#define LS1X_WDT_EN			LS1X_WDT_REG(0x0)
> +#define LS1X_WDT_SET			LS1X_WDT_REG(0x4)
> +#define LS1X_WDT_TIMER			LS1X_WDT_REG(0x8)
> +
> +#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/war.h
> b/arch/mips/include/asm/mach-loongson1/war.h
> new file mode 100644
> index 0000000..e3680a8
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/war.h
> @@ -0,0 +1,25 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General
> Public
> + * License.  See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@xxxxxxxxxxxxxx>
> + */
> +#ifndef __ASM_MACH_LOONGSON1_WAR_H
> +#define __ASM_MACH_LOONGSON1_WAR_H
> +
> +#define R4600_V1_INDEX_ICACHEOP_WAR	0
> +#define R4600_V1_HIT_CACHEOP_WAR	0
> +#define R4600_V2_HIT_CACHEOP_WAR	0
> +#define R5432_CP0_INTERRUPT_WAR		0
> +#define BCM1250_M3_WAR			0
> +#define SIBYTE_1956_WAR			0
> +#define MIPS4K_ICACHE_REFILL_WAR	0
> +#define MIPS_CACHE_SYNC_WAR		0
> +#define TX49XX_ICACHE_INDEX_INV_WAR	0
> +#define RM9000_CDEX_SMP_WAR		0
> +#define ICACHE_REFILLS_WORKAROUND_WAR	0
> +#define R10000_LLSC_WAR			0
> +#define MIPS34K_MISSED_ITLB_WAR		0
> +
> +#endif /* __ASM_MACH_LOONGSON1_WAR_H */
> diff --git a/arch/mips/loongson1/common/clock.c
> b/arch/mips/loongson1/common/clock.c
> new file mode 100644
> index 0000000..2d98fb0
> --- /dev/null
> +++ b/arch/mips/loongson1/common/clock.c
> @@ -0,0 +1,165 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <asm/clock.h>
> +#include <asm/time.h>
> +
> +#include <loongson1.h>
> +
> +static LIST_HEAD(clocks);
> +static DEFINE_MUTEX(clocks_mutex);
> +
> +struct clk *clk_get(struct device *dev, const char *name)
> +{
> +	struct clk *c;
> +	struct clk *ret = NULL;
> +
> +	mutex_lock(&clocks_mutex);
> +	list_for_each_entry(c, &clocks, node) {
> +		if (!strcmp(c->name, name)) {
> +			ret = c;
> +			break;
> +		}
> +	}
> +	mutex_unlock(&clocks_mutex);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(clk_get);
> +
> +unsigned long clk_get_rate(struct clk *clk)
> +{
> +	return clk->rate;
> +}
> +EXPORT_SYMBOL(clk_get_rate);
> +
> +static void pll_clk_init(struct clk *clk)
> +{
> +	u32 pll;
> +
> +	pll = __raw_readl(LS1X_CLK_PLL_FREQ);
> +	clk->rate = (12 + (pll & 0x3f)) * 33 / 2
> +			+ ((pll >> 8) & 0x3ff) * 33 / 1024 / 2;
> +	clk->rate *= 1000000;
> +}
> +
> +static void cpu_clk_init(struct clk *clk)
> +{
> +	u32 pll, ctrl;
> +
> +	pll = clk_get_rate(clk->parent);
> +	ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_CPU;
> +	clk->rate = pll / (ctrl >> DIV_CPU_SHIFT);
> +}
> +
> +static void ddr_clk_init(struct clk *clk)
> +{
> +	u32 pll, ctrl;
> +
> +	pll = clk_get_rate(clk->parent);
> +	ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_DDR;
> +	clk->rate = pll / (ctrl >> DIV_DDR_SHIFT);
> +}
> +
> +static void dc_clk_init(struct clk *clk)
> +{
> +	u32 pll, ctrl;
> +
> +	pll = clk_get_rate(clk->parent);
> +	ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_DC;
> +	clk->rate = pll / (ctrl >> DIV_DC_SHIFT);
> +}
> +
> +static struct clk_ops pll_clk_ops = {
> +	.init	= pll_clk_init,
> +};
> +
> +static struct clk_ops cpu_clk_ops = {
> +	.init	= cpu_clk_init,
> +};
> +
> +static struct clk_ops ddr_clk_ops = {
> +	.init	= ddr_clk_init,
> +};
> +
> +static struct clk_ops dc_clk_ops = {
> +	.init	= dc_clk_init,
> +};
> +
> +static struct clk pll_clk = {
> +	.name	= "pll",
> +	.ops	= &pll_clk_ops,
> +};
> +
> +static struct clk cpu_clk = {
> +	.name	= "cpu",
> +	.parent = &pll_clk,
> +	.ops	= &cpu_clk_ops,
> +};
> +
> +static struct clk ddr_clk = {
> +	.name	= "ddr",
> +	.parent = &pll_clk,
> +	.ops	= &ddr_clk_ops,
> +};
> +
> +static struct clk dc_clk = {
> +	.name	= "dc",
> +	.parent = &pll_clk,
> +	.ops	= &dc_clk_ops,
> +};
> +
> +int clk_register(struct clk *clk)
> +{
> +	mutex_lock(&clocks_mutex);
> +	list_add(&clk->node, &clocks);
> +	if (clk->ops->init)
> +		clk->ops->init(clk);
> +	mutex_unlock(&clocks_mutex);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(clk_register);
> +
> +static struct clk *ls1x_clks[] = {
> +	&pll_clk,
> +	&cpu_clk,
> +	&ddr_clk,
> +	&dc_clk,
> +};
> +
> +int __init ls1x_clock_init(void)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(ls1x_clks); i++)
> +		clk_register(ls1x_clks[i]);
> +
> +	return 0;
> +}
> +
> +void __init plat_time_init(void)
> +{
> +	struct clk *clk;
> +
> +	/* Initialize LS1X clocks */
> +	ls1x_clock_init();
> +
> +	/* setup mips r4k timer */
> +	clk = clk_get(NULL, "cpu");
> +	if (IS_ERR(clk))
> +		panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
> +
> +	mips_hpt_frequency = clk_get_rate(clk) / 2;
> +}
> diff --git a/arch/mips/loongson1/common/irq.c
> b/arch/mips/loongson1/common/irq.c
> new file mode 100644
> index 0000000..5465baf
> --- /dev/null
> +++ b/arch/mips/loongson1/common/irq.c
> @@ -0,0 +1,146 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <asm/irq_cpu.h>
> +
> +#include <loongson1.h>
> +#include <irq.h>
> +
> +#define LS1X_INTC_REG(n, x) \
> +		((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
> +
> +#define LS1X_INTC_INTISR(n)		LS1X_INTC_REG(n, 0x0)
> +#define LS1X_INTC_INTIEN(n)		LS1X_INTC_REG(n, 0x4)
> +#define LS1X_INTC_INTSET(n)		LS1X_INTC_REG(n, 0x8)
> +#define LS1X_INTC_INTCLR(n)		LS1X_INTC_REG(n, 0xc)
> +#define LS1X_INTC_INTPOL(n)		LS1X_INTC_REG(n, 0x10)
> +#define LS1X_INTC_INTEDGE(n)		LS1X_INTC_REG(n, 0x14)
> +
> +static void ls1x_irq_ack(struct irq_data *d)
> +{
> +	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
> +	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
> +
> +	__raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
> +			| (1 << bit), LS1X_INTC_INTCLR(n));
> +}
> +
> +static void ls1x_irq_mask(struct irq_data *d)
> +{
> +	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
> +	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
> +
> +	__raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
> +			& ~(1 << bit), LS1X_INTC_INTIEN(n));
> +}
> +
> +static void ls1x_irq_mask_ack(struct irq_data *d)
> +{
> +	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
> +	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
> +
> +	__raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
> +			& ~(1 << bit), LS1X_INTC_INTIEN(n));
> +	__raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
> +			| (1 << bit), LS1X_INTC_INTCLR(n));
> +}
> +
> +static void ls1x_irq_unmask(struct irq_data *d)
> +{
> +	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
> +	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
> +
> +	__raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
> +			| (1 << bit), LS1X_INTC_INTIEN(n));
> +}
> +
> +static struct irq_chip ls1x_irq_chip = {
> +	.name		= "LS1X-INTC",
> +	.irq_ack	= ls1x_irq_ack,
> +	.irq_mask	= ls1x_irq_mask,
> +	.irq_mask_ack	= ls1x_irq_mask_ack,
> +	.irq_unmask	= ls1x_irq_unmask,
> +};
> +
> +static void ls1x_irq_dispatch(int n)
> +{
> +	u32 int_status, irq;
> +
> +	/* Get pending sources, masked by current enables */
> +	int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
> +			__raw_readl(LS1X_INTC_INTIEN(n));
> +
> +	if (int_status) {
> +		irq = LS1X_IRQ(n, __ffs(int_status));
> +		do_IRQ(irq);
> +	}
> +}
> +
> +asmlinkage void plat_irq_dispatch(void)
> +{
> +	unsigned int pending;
> +
> +	pending = read_c0_cause() & read_c0_status() & ST0_IM;
> +
> +	if (pending & CAUSEF_IP7)
> +		do_IRQ(TIMER_IRQ);
> +	else if (pending & CAUSEF_IP2)
> +		ls1x_irq_dispatch(0); /* INT0 */
> +	else if (pending & CAUSEF_IP3)
> +		ls1x_irq_dispatch(1); /* INT1 */
> +	else if (pending & CAUSEF_IP4)
> +		ls1x_irq_dispatch(2); /* INT2 */
> +	else if (pending & CAUSEF_IP5)
> +		ls1x_irq_dispatch(3); /* INT3 */
> +	else if (pending & CAUSEF_IP6)
> +		ls1x_irq_dispatch(4); /* INT4 */
> +	else
> +		spurious_interrupt();
> +
> +}
> +
> +struct irqaction cascade_irqaction = {
> +	.handler = no_action,
> +	.name = "cascade",
> +	.flags = IRQF_NO_THREAD,
> +};
> +
> +static void __init ls1x_irq_init(int base)
> +{
> +	int n;
> +
> +	/* Disable interrupts and clear pending,
> +	 * setup all IRQs as high level triggered
> +	 */
> +	for (n = 0; n < 4; n++) {
> +		__raw_writel(0x0, LS1X_INTC_INTIEN(n));
> +		__raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
> +		__raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
> +		__raw_writel(0x0, LS1X_INTC_INTEDGE(n));
> +	}
> +
> +
> +	for (n = base; n < NR_IRQS; n++) {
> +		irq_set_chip_and_handler(n, &ls1x_irq_chip,
> +					 handle_level_irq);
> +	}
> +
> +	setup_irq(INT0_IRQ, &cascade_irqaction);
> +	setup_irq(INT1_IRQ, &cascade_irqaction);
> +	setup_irq(INT2_IRQ, &cascade_irqaction);
> +	setup_irq(INT3_IRQ, &cascade_irqaction);
> +}
> +
> +void __init arch_init_irq(void)
> +{
> +	mips_cpu_irq_init();
> +	ls1x_irq_init(LS1X_IRQ_BASE);
> +}
> diff --git a/arch/mips/loongson1/common/platform.c
> b/arch/mips/loongson1/common/platform.c
> new file mode 100644
> index 0000000..08c8a39
> --- /dev/null
> +++ b/arch/mips/loongson1/common/platform.c
> @@ -0,0 +1,98 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/phy.h>
> +#include <linux/serial_8250.h>
> +#include <linux/stmmac.h>
> +#include <asm-generic/sizes.h>
> +
> +#include <loongson1.h>
> +
> +#define LS1X_UART(_id)						\
> +	{							\
> +		.mapbase	= LS1X_UART ## _id ## _BASE,	\
> +		.irq		= LS1X_UART ## _id ## _IRQ,	\
> +		.iotype		= UPIO_MEM,			\
> +		.flags		= UPF_IOREMAP | UPF_FIXED_TYPE,	\
> +		.type		= PORT_16550A,			\
> +	}
> +
> +static struct plat_serial8250_port ls1x_serial8250_port[] = {
> +	LS1X_UART(0),
> +	LS1X_UART(1),
> +	LS1X_UART(2),
> +	LS1X_UART(3),
> +	{},
> +};
> +
> +struct platform_device ls1x_uart_device = {
> +	.name		= "serial8250",
> +	.id		= PLAT8250_DEV_PLATFORM,
> +	.dev		= {
> +		.platform_data = ls1x_serial8250_port,
> +	},
> +};
> +
> +void __init ls1x_serial_setup(void)
> +{
> +	struct clk *clk;
> +	struct plat_serial8250_port *p;
> +
> +	clk = clk_get(NULL, "dc");
> +	if (IS_ERR(clk))
> +		panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
> +
> +	for (p = ls1x_serial8250_port; p->flags != 0; ++p)
> +		p->uartclk = clk_get_rate(clk);
> +}
> +
> +/* Synopsys Ethernet GMAC */
> +static struct resource ls1x_eth0_resources[] = {
> +	[0] = {
> +		.start	= LS1X_GMAC0_BASE,
> +		.end	= LS1X_GMAC0_BASE + SZ_64K - 1,
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[1] = {
> +		.name	= "macirq",
> +		.start	= LS1X_GMAC0_IRQ,
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +};
> +
> +static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
> +	.bus_id		= 0,
> +	.phy_mask	= 0,
> +};
> +
> +static struct plat_stmmacenet_data ls1x_eth_data = {
> +	.bus_id		= 0,
> +	.phy_addr	= -1,
> +	.mdio_bus_data	= &ls1x_mdio_bus_data,
> +	.pbl		= 32,
> +	.has_gmac	= 1,
> +	.tx_coe		= 1,
> +};
> +
> +struct platform_device ls1x_eth0_device = {
> +	.name		= "stmmaceth",
> +	.id		= 0,
> +	.num_resources	= ARRAY_SIZE(ls1x_eth0_resources),
> +	.resource	= ls1x_eth0_resources,
> +	.dev		= {
> +		.platform_data = &ls1x_eth_data,
> +	},
> +};
> +
> +struct platform_device ls1x_rtc_device = {
> +	.name		= "ls1x-rtc",
> +	.id		= -1,
> +};
> diff --git a/arch/mips/loongson1/common/prom.c
> b/arch/mips/loongson1/common/prom.c
> new file mode 100644
> index 0000000..57f88ea
> --- /dev/null
> +++ b/arch/mips/loongson1/common/prom.c
> @@ -0,0 +1,87 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Modified from arch/mips/pnx833x/common/prom.c.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/serial_reg.h>
> +#include <asm/bootinfo.h>
> +
> +#include <loongson1.h>
> +#include <prom.h>
> +
> +int prom_argc;
> +char **prom_argv, **prom_envp;
> +unsigned long memsize, highmemsize;
> +
> +char *prom_getenv(char *envname)
> +{
> +	char **env = prom_envp;
> +	int i;
> +
> +	i = strlen(envname);
> +
> +	while (*env) {
> +		if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
> +			return *env + i + 1;
> +		env++;
> +	}
> +
> +	return 0;
> +}
> +
> +static inline unsigned long env_or_default(char *env, unsigned long dfl)
> +{
> +	char *str = prom_getenv(env);
> +	return str ? simple_strtol(str, 0, 0) : dfl;
> +}
> +
> +void __init prom_init_cmdline(void)
> +{
> +	char *c = &(arcs_cmdline[0]);
> +	int i;
> +
> +	for (i = 1; i < prom_argc; i++) {
> +		strcpy(c, prom_argv[i]);
> +		c += strlen(prom_argv[i]);
> +		if (i < prom_argc-1)
> +			*c++ = ' ';
> +	}
> +	*c = 0;
> +}
> +
> +void __init prom_init(void)
> +{
> +	prom_argc = fw_arg0;
> +	prom_argv = (char **)fw_arg1;
> +	prom_envp = (char **)fw_arg2;
> +
> +	prom_init_cmdline();
> +
> +	memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
> +	highmemsize = env_or_default("highmemsize", 0x0);
> +}
> +
> +void __init prom_free_prom_memory(void)
> +{
> +}
> +
> +#define PORT(offset)	(u8 *)KSEG1ADDR(LS1X_UART0_BASE + offset)
> +
> +void __init prom_putchar(char c)
> +{
> +	int timeout;
> +
> +	timeout = 1024;
> +
> +	while (((readb(PORT(UART_LSR)) & UART_LSR_THRE) == 0)
> +			&& (timeout-- > 0))
> +		;
> +
> +	writeb(c, PORT(UART_TX));
> +}
> diff --git a/arch/mips/loongson1/common/reset.c
> b/arch/mips/loongson1/common/reset.c
> new file mode 100644
> index 0000000..fb979a7
> --- /dev/null
> +++ b/arch/mips/loongson1/common/reset.c
> @@ -0,0 +1,45 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/pm.h>
> +#include <asm/reboot.h>
> +
> +#include <loongson1.h>
> +
> +static void ls1x_restart(char *command)
> +{
> +	__raw_writel(0x1, LS1X_WDT_EN);
> +	__raw_writel(0x5000000, LS1X_WDT_TIMER);
> +	__raw_writel(0x1, LS1X_WDT_SET);
> +}
> +
> +static void ls1x_halt(void)
> +{
> +	while (1) {
> +		if (cpu_wait)
> +			cpu_wait();
> +	}
> +}
> +
> +static void ls1x_power_off(void)
> +{
> +	ls1x_halt();
> +}
> +
> +static int __init ls1x_reboot_setup(void)
> +{
> +	_machine_restart = ls1x_restart;
> +	_machine_halt = ls1x_halt;
> +	pm_power_off = ls1x_power_off;
> +
> +	return 0;
> +}
> +
> +arch_initcall(ls1x_reboot_setup);
> diff --git a/arch/mips/loongson1/common/setup.c
> b/arch/mips/loongson1/common/setup.c
> new file mode 100644
> index 0000000..62128cc
> --- /dev/null
> +++ b/arch/mips/loongson1/common/setup.c
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <asm/bootinfo.h>
> +
> +#include <prom.h>
> +
> +void __init plat_mem_setup(void)
> +{
> +	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
> +}
> +
> +const char *get_system_type(void)
> +{
> +	unsigned int processor_id = (&current_cpu_data)->processor_id;
> +
> +	switch (processor_id & PRID_REV_MASK) {
> +	case PRID_REV_LOONGSON1B:
> +		return "LOONGSON LS1B";
> +	default:
> +		return "LOONGSON (unknown)";
> +	}
> +}
> diff --git a/arch/mips/loongson1/ls1b/board.c
> b/arch/mips/loongson1/ls1b/board.c
> new file mode 100644
> index 0000000..7aaebff
> --- /dev/null
> +++ b/arch/mips/loongson1/ls1b/board.c
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <platform.h>
> +
> +#include <linux/serial_8250.h>
> +#include <loongson1.h>
> +
> +static struct platform_device *ls1b_platform_devices[] __initdata = {
> +	&ls1x_uart_device,
> +	&ls1x_eth0_device,
> +	&ls1x_rtc_device,
> +};
> +
> +static int __init ls1b_platform_init(void)
> +{
> +	int err;
> +
> +	ls1x_serial_setup();
> +
> +	err = platform_add_devices(ls1b_platform_devices,
> +				   ARRAY_SIZE(ls1b_platform_devices));
> +	return err;
> +}
> +
> +arch_initcall(ls1b_platform_init);
> --
> 1.7.1
>
>


-- 
Best Regards!
Kelvin



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux