On Tue, Jun 14, 2011 at 09:33:45AM -0600, Shane McDonald wrote:
> On Thu, Jun 9, 2011 at 9:58 PM, Ralf Baechle <ralf@xxxxxxxxxxxxxx> wrote:
> > If you look at arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h there's
> >
> > #define MSP_UART0_BASE (MSP_SLP_BASE + 0x100)
> > /* UART0 controller base */
> > #define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120)
> > /* Block Copy controller base */
> >
> > So there are just 0x20 of address space reserved for that UART. Me thinks
> > that PMC-Sierra clamped the 256 byte address space of the DesignWare APB
> > UART to what is standard for 16550 class UARTs, 8 registers which at a
> > shift of 4 is 0x20 bytes and the status register being accesses is really
> > something else. I'd guess PMC-Sierra just remapped the register to
> > another address.
>
> I have confirmed with a contact at PMC-Sierra that this is the case.
Thanks for confirming that Shane. I'm currently working on a series to
move the DesignWare handling code into the pmc-sierra platform and kill
off UPIO_DWAPB{,32} and will post it in a couple of days.
Jamie
