[PATCH V3 3/3] MIPS: lantiq: etop board support

[John Crispin <blogic@xxxxxxxxxxx>]

Register the etop platform device inside the machtype specific init code.

--

Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
Signed-off-by: Ralph Hempel <ralph.hempel@xxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx

 arch/mips/lantiq/xway/mach-easy50712.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
index 5242a27..0cbb30b 100644
--- a/arch/mips/lantiq/xway/mach-easy50712.c
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
@@ -59,6 +59,10 @@ static struct ltq_pci_data ltq_pci_data = {
 	},
 };
 
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
 static void __init easy50712_init(void)
 {
 	ltq_register_gpio();
@@ -66,6 +70,7 @@ static void __init easy50712_init(void)
 	ltq_register_nor(&easy50712_flash_data);
 	ltq_register_wdt();
 	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
 }
 
 MIPS_MACHINE(LTQ_MACH_EASY50712,
-- 
1.7.2.3