[RFC PATCH v3 5/6] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is needed for Octeon to use the Device Tree.

The GPIO interrupts are configured based on Device Tree properties

Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
---
 arch/mips/cavium-octeon/octeon-irq.c |  183 +++++++++++++++++++++++++++++++++-
 1 files changed, 182 insertions(+), 1 deletions(-)

diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index ffd4ae6..68b711c 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -8,11 +8,14 @@
 
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
+#include <linux/module.h>
 #include <linux/percpu.h>
+#include <linux/of_irq.h>
 #include <linux/irq.h>
 #include <linux/smp.h>
 
 #include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-gpio-defs.h>
 
 static DEFINE_RAW_SPINLOCK(octeon_irq_ciu0_lock);
 static DEFINE_RAW_SPINLOCK(octeon_irq_ciu1_lock);
@@ -58,6 +61,90 @@ static void __init octeon_irq_set_ciu_mapping(int irq, int line, int bit,
 	octeon_irq_ciu_to_irq[line][bit] = irq;
 }
 
+static unsigned int octeon_irq_gpio_mapping(struct device_node *controller,
+					    const u32 *intspec,
+					    unsigned int intsize)
+{
+	struct of_irq oirq;
+	int i;
+	unsigned int irq = 0;
+	unsigned int type;
+	unsigned int ciu = 0, bit = 0;
+	unsigned int pin = be32_to_cpup(intspec);
+	unsigned int trigger = be32_to_cpup(intspec + 1);
+	bool set_edge_handler = false;
+
+	if (pin >= 16)
+		goto err;
+	i = of_irq_map_one(controller, 0, &oirq);
+	if (i)
+		goto err;
+	if (oirq.size != 2)
+		goto err_put;
+
+	ciu = oirq.specifier[0];
+	bit = oirq.specifier[1] + pin;
+
+	if (ciu >= 8 || bit >= 64)
+		goto err_put;
+
+	irq = octeon_irq_ciu_to_irq[ciu][bit];
+	if (!irq)
+		goto err_put;
+
+	switch (trigger & 3) {
+	case 0:
+		type = IRQ_TYPE_LEVEL_HIGH;
+		break;
+	case 1:
+		type = IRQ_TYPE_LEVEL_LOW;
+		break;
+	case 2:
+		type = IRQ_TYPE_EDGE_RISING;
+		set_edge_handler = true;
+		break;
+	case 3:
+		type = IRQ_TYPE_EDGE_FALLING;
+		set_edge_handler = true;
+		break;
+	}
+
+	irq_set_irq_type(irq, type);
+
+	if (set_edge_handler)
+		__irq_set_handler(irq, handle_edge_irq, 0, NULL);
+
+err_put:
+	of_node_put(oirq.controller);
+err:
+	return irq;
+}
+
+/*
+ * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq#
+ *
+ * Octeon irq maps are a pair of indexes.  The first selects either
+ * ciu0 or ciu1, the second is the bit within the ciu register.
+ */
+unsigned int irq_create_of_mapping(struct device_node *controller,
+				   const u32 *intspec, unsigned int intsize)
+{
+	unsigned int irq = 0;
+	unsigned int ciu, bit;
+
+	if (of_device_is_compatible(controller, "cavium,octeon-3860-gpio"))
+		return octeon_irq_gpio_mapping(controller, intspec, intsize);
+
+	ciu = be32_to_cpup(intspec);
+	bit = be32_to_cpup(intspec + 1);
+
+	if (ciu < 8 && bit < 64)
+		irq = octeon_irq_ciu_to_irq[ciu][bit];
+
+	return irq;
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
+
 static int octeon_coreid_for_cpu(int cpu)
 {
 #ifdef CONFIG_SMP
@@ -505,6 +592,72 @@ static void octeon_irq_ciu_enable_all_v2(struct irq_data *data)
 	}
 }
 
+static void octeon_irq_gpio_setup(struct irq_data *data)
+{
+	union cvmx_gpio_bit_cfgx cfg;
+	int bit = data->irq - OCTEON_IRQ_GPIO0;
+	u32 t = irqd_get_trigger_type(data);
+
+	cfg.u64 = 0;
+	cfg.s.int_en = 1;
+	cfg.s.int_type = (t & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) != 0;
+	cfg.s.rx_xor = (t & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING)) != 0;
+
+	/* 1 uS glitch filter*/
+	cfg.s.fil_cnt = 7;
+	cfg.s.fil_sel = 3;
+
+	cvmx_write_csr(CVMX_GPIO_BIT_CFGX(bit), cfg.u64);
+}
+
+static void octeon_irq_ciu_enable_gpio_v2(struct irq_data *data)
+{
+	octeon_irq_gpio_setup(data);
+	octeon_irq_ciu_enable_v2(data);
+}
+
+static void octeon_irq_ciu_enable_gpio(struct irq_data *data)
+{
+	octeon_irq_gpio_setup(data);
+	octeon_irq_ciu_enable(data);
+}
+
+static int octeon_irq_ciu_gpio_set_type(struct irq_data *data, unsigned int t)
+{
+	u32 current_type = irqd_get_trigger_type(data);
+
+	/* If the type has been set, don't change it */
+	if (current_type && current_type != t)
+		return -EINVAL;
+
+	irqd_set_trigger_type(data, t);
+	return IRQ_SET_MASK_OK;
+}
+
+static void octeon_irq_ciu_disable_gpio_v2(struct irq_data *data)
+{
+	int bit = data->irq - OCTEON_IRQ_GPIO0;
+	cvmx_write_csr(CVMX_GPIO_BIT_CFGX(bit), 0);
+
+	octeon_irq_ciu_disable_all_v2(data);
+}
+
+static void octeon_irq_ciu_disable_gpio(struct irq_data *data)
+{
+	int bit = data->irq - OCTEON_IRQ_GPIO0;
+	cvmx_write_csr(CVMX_GPIO_BIT_CFGX(bit), 0);
+
+	octeon_irq_ciu_disable_all(data);
+}
+
+static void octeon_irq_ciu_gpio_ack(struct irq_data *data)
+{
+	int bit = data->irq - OCTEON_IRQ_GPIO0;
+	u64 mask = 1ull << bit;
+
+	cvmx_write_csr(CVMX_GPIO_INT_CLR, mask);
+}
+
 #ifdef CONFIG_SMP
 
 static void octeon_irq_cpu_offline_ciu(struct irq_data *data)
@@ -717,6 +870,31 @@ static struct irq_chip octeon_irq_chip_ciu_mbox = {
 	.flags = IRQCHIP_ONOFFLINE_ENABLED,
 };
 
+static struct irq_chip octeon_irq_chip_ciu_gpio_v2 = {
+	.name = "CIU-GPIO",
+	.irq_enable = octeon_irq_ciu_enable_gpio_v2,
+	.irq_disable = octeon_irq_ciu_disable_gpio_v2,
+	.irq_ack = octeon_irq_ciu_gpio_ack,
+	.irq_mask = octeon_irq_ciu_disable_local_v2,
+	.irq_unmask = octeon_irq_ciu_enable_v2,
+	.irq_set_type = octeon_irq_ciu_gpio_set_type,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
+#endif
+};
+
+static struct irq_chip octeon_irq_chip_ciu_gpio = {
+	.name = "CIU-GPIO",
+	.irq_enable = octeon_irq_ciu_enable_gpio,
+	.irq_disable = octeon_irq_ciu_disable_gpio,
+	.irq_mask = octeon_irq_dummy_mask,
+	.irq_ack = octeon_irq_ciu_gpio_ack,
+	.irq_set_type = octeon_irq_ciu_gpio_set_type,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = octeon_irq_ciu_set_affinity,
+#endif
+};
+
 /*
  * Watchdog interrupts are special.  They are associated with a single
  * core, so we hardwire the affinity to that core.
@@ -890,6 +1068,7 @@ static void __init octeon_irq_init_ciu(void)
 	struct irq_chip *chip_edge;
 	struct irq_chip *chip_mbox;
 	struct irq_chip *chip_wd;
+	struct irq_chip *chip_gpio;
 
 	octeon_irq_init_ciu_percpu();
 	octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu;
@@ -904,6 +1083,7 @@ static void __init octeon_irq_init_ciu(void)
 		chip_edge = &octeon_irq_chip_ciu_edge_v2;
 		chip_mbox = &octeon_irq_chip_ciu_mbox_v2;
 		chip_wd = &octeon_irq_chip_ciu_wd_v2;
+		chip_gpio = &octeon_irq_chip_ciu_gpio_v2;
 	} else {
 		octeon_irq_ip2 = octeon_irq_ip2_v1;
 		octeon_irq_ip3 = octeon_irq_ip3_v1;
@@ -911,6 +1091,7 @@ static void __init octeon_irq_init_ciu(void)
 		chip_edge = &octeon_irq_chip_ciu_edge;
 		chip_mbox = &octeon_irq_chip_ciu_mbox;
 		chip_wd = &octeon_irq_chip_ciu_wd;
+		chip_gpio = &octeon_irq_chip_ciu_gpio;
 	}
 	octeon_irq_ip4 = octeon_irq_ip4_mask;
 
@@ -921,7 +1102,7 @@ static void __init octeon_irq_init_ciu(void)
 	for (i = 0; i < 16; i++)
 		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq);
 	for (i = 0; i < 16; i++)
-		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_GPIO0, 0, i + 16, chip, handle_level_irq);
+		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_GPIO0, 0, i + 16, chip_gpio, handle_level_irq);
 
 	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
 	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
-- 
1.7.2.3




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux