2.6.32-longterm review patch. If anyone has any objections, please let us know. ------------------ From: Florian Fainelli <florian@xxxxxxxxxxx> commit bf3a1eb85967dcbaae42f4fcb53c2392cec32677 upstream. When au1000_eth probes the MII bus for PHY address, if we do not set au1000_eth platform data's phy_search_highest_address, the MII probing logic will exit early and will assume a valid PHY is found at address 0. For MTX-1, the PHY is at address 31, and without this patch, the link detection/speed/duplex would not work correctly. Signed-off-by: Florian Fainelli <florian@xxxxxxxxxxx> To: linux-mips@xxxxxxxxxxxxxx Patchwork: https://patchwork.linux-mips.org/patch/2111/ Signed-off-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx> --- arch/mips/alchemy/mtx-1/platform.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -28,6 +28,8 @@ #include <linux/mtd/physmap.h> #include <mtd/mtd-abi.h> +#include <asm/mach-au1x00/au1xxx_eth.h> + static struct gpio_keys_button mtx1_gpio_button[] = { { .gpio = 207, @@ -140,10 +142,17 @@ static struct __initdata platform_device &mtx1_mtd, }; +static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = { + .phy_search_highest_addr = 1, + .phy1_search_mac0 = 1, +}; + static int __init mtx1_register_devices(void) { int rc; + au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata); + rc = gpio_request(mtx1_gpio_button[0].gpio, mtx1_gpio_button[0].desc); if (rc < 0) {
