Add support for the Lantiq XWAY family of Mips24KEc SoCs.
* Danube (PSB50702)
* Twinpass (PSB4000)
* AR9 (PSB50802)
* Amazon SE (PSB5061)
The Amazon SE is a lightweight SoC and has no PCI as well as a different
clock. We split the code out into seperate files to handle this.
The GPIO pins on the SoCs are multi function and there are several bits
we can use to configure the pins. To be as compatible as possible to
GPIOLIB we add a function
int lq_gpio_request(unsigned int pin, unsigned int alt0,
unsigned int alt1, unsigned int dir, const char *name);
which lets you configure the 2 "alternate function" bits. This way drivers like
PCI can make use of GPIOLIB without a cubersome wrapper.
The pll code inside arch/mips/lantiq/xway/clk-xway.c is voodoo to me. It was
taken from a 2.4.20 source tree and was never really changed by me since then.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
Signed-off-by: Ralph Hempel <ralph.hempel@xxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx
---
Changes in V2
* properly ioremap all register regions and provide accessor macros (pmu,ebu,cgu)
* add handling for EXIN irq sources
* small cleanups
Changes in V3
* whitespace
* change __iomem void to void __iomem
* multiline comments
* use pr_* macros instead of printk
arch/mips/Kconfig | 1 +
arch/mips/include/asm/mach-lantiq/xway/irq.h | 18 ++
.../mips/include/asm/mach-lantiq/xway/lantiq_irq.h | 62 ++++++
.../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 145 ++++++++++++
arch/mips/lantiq/Kconfig | 21 ++
arch/mips/lantiq/Makefile | 2 +
arch/mips/lantiq/Platform | 1 +
arch/mips/lantiq/xway/Makefile | 4 +
arch/mips/lantiq/xway/clk-ase.c | 52 +++++
arch/mips/lantiq/xway/clk-xway.c | 232 ++++++++++++++++++++
arch/mips/lantiq/xway/ebu.c | 36 +++
arch/mips/lantiq/xway/gpio.c | 203 +++++++++++++++++
arch/mips/lantiq/xway/pmu.c | 57 +++++
arch/mips/lantiq/xway/prom-ase.c | 40 ++++
arch/mips/lantiq/xway/prom-xway.c | 55 +++++
arch/mips/lantiq/xway/reset.c | 67 ++++++
16 files changed, 996 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/mach-lantiq/xway/irq.h
create mode 100644 arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
create mode 100644 arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
create mode 100644 arch/mips/lantiq/Kconfig
create mode 100644 arch/mips/lantiq/xway/Makefile
create mode 100644 arch/mips/lantiq/xway/clk-ase.c
create mode 100644 arch/mips/lantiq/xway/clk-xway.c
create mode 100644 arch/mips/lantiq/xway/ebu.c
create mode 100644 arch/mips/lantiq/xway/gpio.c
create mode 100644 arch/mips/lantiq/xway/pmu.c
create mode 100644 arch/mips/lantiq/xway/prom-ase.c
create mode 100644 arch/mips/lantiq/xway/prom-xway.c
create mode 100644 arch/mips/lantiq/xway/reset.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f975932..756e67a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -758,6 +758,7 @@ source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
+source "arch/mips/lantiq/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/powertv/Kconfig"
diff --git a/arch/mips/include/asm/mach-lantiq/xway/irq.h b/arch/mips/include/asm/mach-lantiq/xway/irq.h
new file mode 100644
index 0000000..a1471d2
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/irq.h
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#ifndef __LANTIQ_IRQ_H
+#define __LANTIQ_IRQ_H
+
+#include <lantiq_irq.h>
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
new file mode 100644
index 0000000..5c81c98
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
@@ -0,0 +1,62 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#ifndef _LANTIQ_XWAY_IRQ_H__
+#define _LANTIQ_XWAY_IRQ_H__
+
+#define INT_NUM_IRQ0 8
+#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8))
+#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1)
+#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2)
+
+#define LTQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
+#define LTQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
+#define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
+
+#define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
+#define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23)
+
+#define LTQ_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
+#define LTQ_USB_INT (INT_NUM_IM1_IRL0 + 22)
+#define LTQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
+
+#define MIPS_CPU_TIMER_IRQ 7
+
+#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0)
+#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
+#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
+#define LTQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
+#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
+#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
+#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
+#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
+#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
+#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
+#define LTQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
+#define LTQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
+#define LTQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
+#define LTQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
+#define LTQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
+#define LTQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
+#define LTQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
+#define LTQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
+#define LTQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
+#define LTQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
+
+#define LTQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24)
+
+#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14)
+
+#endif
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
new file mode 100644
index 0000000..f410948
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -0,0 +1,145 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#ifdef CONFIG_SOC_TYPE_XWAY
+
+#ifndef _LTQ_XWAY_H__
+#define _LTQ_XWAY_H__
+
+#include <lantiq.h>
+
+/* Chip IDs */
+#define SOC_ID_DANUBE1 0x129
+#define SOC_ID_DANUBE2 0x12B
+#define SOC_ID_TWINPASS 0x12D
+#define SOC_ID_AMAZON_SE 0x152
+#define SOC_ID_ARX188 0x16C
+#define SOC_ID_ARX168 0x16D
+#define SOC_ID_ARX182 0x16F
+
+/* SoC Types */
+#define SOC_TYPE_DANUBE 0x01
+#define SOC_TYPE_TWINPASS 0x02
+#define SOC_TYPE_AR9 0x03
+#define SOC_TYPE_VR9 0x04
+#define SOC_TYPE_AMAZON_SE 0x05
+
+/* ASC0/1 - serial port */
+#define LTQ_ASC0_BASE_ADDR 0x1E100400
+#define LTQ_ASC1_BASE_ADDR 0x1E100C00
+#define LTQ_ASC_SIZE 0x400
+
+/* RCU - reset control unit */
+#define LTQ_RCU_BASE_ADDR 0x1F203000
+#define LTQ_RCU_SIZE 0x1000
+
+/* GPTU - general purpose timer unit */
+#define LTQ_GPTU_BASE_ADDR 0x18000300
+
+/* EBU - external bus unit */
+#define LTQ_EBU_GPIO_START 0x14000000
+#define LTQ_EBU_GPIO_SIZE 0x1000
+
+#define LTQ_EBU_BASE_ADDR 0x1E105300
+#define LTQ_EBU_SIZE 0x100
+
+#define LTQ_EBU_BUSCON0 0x0060
+#define LTQ_EBU_PCC_CON 0x0090
+#define LTQ_EBU_PCC_IEN 0x00A4
+#define LTQ_EBU_PCC_ISTAT 0x00A0
+#define LTQ_EBU_BUSCON1 0x0064
+#define LTQ_EBU_ADDRSEL1 0x0024
+#define EBU_WRDIS 0x80000000
+
+/* CGU - clock generation unit */
+#define LTQ_CGU_BASE_ADDR 0x1F103000
+#define LTQ_CGU_SIZE 0x1000
+
+/* ICU - interrupt control unit */
+#define LTQ_ICU_BASE_ADDR 0x1F880200
+#define LTQ_ICU_SIZE 0x100
+
+/* EIU - external interrupt unit */
+#define LTQ_EIU_BASE_ADDR 0x1F101000
+#define LTQ_EIU_SIZE 0x1000
+
+/* PMU - power management unit */
+#define LTQ_PMU_BASE_ADDR 0x1F102000
+#define LTQ_PMU_SIZE 0x1000
+
+#define PMU_DMA 0x0020
+#define PMU_USB 0x8041
+#define PMU_LED 0x0800
+#define PMU_GPT 0x1000
+#define PMU_PPE 0x2000
+#define PMU_FPI 0x4000
+#define PMU_SWITCH 0x10000000
+
+/* ETOP - ethernet */
+#define LTQ_PPE32_BASE_ADDR 0xBE180000
+#define LTQ_PPE32_SIZE 0x40000
+
+/* DMA */
+#define LTQ_DMA_BASE_ADDR 0xBE104100
+
+/* PCI */
+#define PCI_CR_BASE_ADDR 0x1E105400
+#define PCI_CR_SIZE 0x400
+
+/* WDT */
+#define LTQ_WDT_BASE_ADDR 0x1F880000
+#define LTQ_WDT_SIZE 0x400
+
+/* STP - serial to parallel conversion unit */
+#define LTQ_STP_BASE_ADDR 0x1E100BB0
+#define LTQ_STP_SIZE 0x40
+
+/* GPIO */
+#define LTQ_GPIO0_BASE_ADDR 0x1E100B10
+#define LTQ_GPIO1_BASE_ADDR 0x1E100B40
+#define LTQ_GPIO2_BASE_ADDR 0x1E100B70
+#define LTQ_GPIO_SIZE 0x30
+
+/* SSC */
+#define LTQ_SSC_BASE_ADDR 0x1e100800
+#define LTQ_SSC_SIZE 0x100
+
+/* MEI - dsl core */
+#define LTQ_MEI_BASE_ADDR 0x1E116000
+
+/* DEU - data encryption unit */
+#define LTQ_DEU_BASE_ADDR 0x1E103100
+
+/* MPS - multi processor unit (voice) */
+#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
+#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+
+/* request a non-gpio and set the PIO config */
+extern int ltq_gpio_request(unsigned int pin, unsigned int alt0,
+ unsigned int alt1, unsigned int dir, const char *name);
+extern int ltq_gpio_setconfig(unsigned int pin,
+ unsigned int reg, unsigned int val);
+
+extern void ltq_pmu_enable(unsigned int module);
+extern void ltq_pmu_disable(unsigned int module);
+
+static inline int
+ltq_is_ar9(void)
+{
+ return (ltq_get_soc_type() == SOC_TYPE_AR9);
+}
+
+static inline int
+ltq_is_vr9(void)
+{
+ return (ltq_get_soc_type() == SOC_TYPE_VR9);
+}
+
+#endif
+
+#endif
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
new file mode 100644
index 0000000..2780461
--- /dev/null
+++ b/arch/mips/lantiq/Kconfig
@@ -0,0 +1,21 @@
+if LANTIQ
+
+config SOC_TYPE_XWAY
+ bool
+ default n
+
+choice
+ prompt "SoC Type"
+ default SOC_XWAY
+
+config SOC_AMAZON_SE
+ bool "Amazon SE"
+ select SOC_TYPE_XWAY
+
+config SOC_XWAY
+ bool "XWAY"
+ select SOC_TYPE_XWAY
+ select HW_HAS_PCI
+endchoice
+
+endif
diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
index 6a30de6..a268391 100644
--- a/arch/mips/lantiq/Makefile
+++ b/arch/mips/lantiq/Makefile
@@ -7,3 +7,5 @@
obj-y := irq.o setup.o clk.o prom.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform
index eef587f..f3dff05 100644
--- a/arch/mips/lantiq/Platform
+++ b/arch/mips/lantiq/Platform
@@ -5,3 +5,4 @@
platform-$(CONFIG_LANTIQ) += lantiq/
cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq
load-$(CONFIG_LANTIQ) = 0xffffffff80002000
+cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
new file mode 100644
index 0000000..9c85ff9
--- /dev/null
+++ b/arch/mips/lantiq/xway/Makefile
@@ -0,0 +1,4 @@
+obj-y := pmu.o ebu.o reset.o gpio.o
+
+obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
+obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
new file mode 100644
index 0000000..5444917
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk-ase.c
@@ -0,0 +1,52 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2011 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+/* cgu registers */
+#define LTQ_CGU_SYS 0x0010
+
+unsigned int
+ltq_get_io_region_clock(void)
+{
+ return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int
+ltq_get_fpi_bus_clock(int fpi)
+{
+ return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int
+ltq_get_cpu_hz(void)
+{
+ if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+ return CLOCK_266M;
+ else
+ return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int
+ltq_get_fpi_hz(void)
+{
+ return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
new file mode 100644
index 0000000..89246be
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk-xway.c
@@ -0,0 +1,232 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+static unsigned int ltq_ram_clocks[] = {
+ CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
+#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
+
+#define BASIC_FREQUENCY_1 35328000
+#define BASIC_FREQUENCY_2 36000000
+#define BASIS_REQUENCY_USB 12000000
+
+#define GET_BITS(x, msb, lsb) \
+ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+
+#define LTQ_CGU_PLL0_CFG 0x0004
+#define LTQ_CGU_PLL1_CFG 0x0008
+#define LTQ_CGU_PLL2_CFG 0x000C
+#define LTQ_CGU_SYS 0x0010
+#define LTQ_CGU_UPDATE 0x0014
+#define LTQ_CGU_IF_CLK 0x0018
+#define LTQ_CGU_OSC_CON 0x001C
+#define LTQ_CGU_SMD 0x0020
+#define LTQ_CGU_CT1SR 0x0028
+#define LTQ_CGU_CT2SR 0x002C
+#define LTQ_CGU_PCMCR 0x0030
+#define LTQ_CGU_PCI_CR 0x0034
+#define LTQ_CGU_PD_PC 0x0038
+#define LTQ_CGU_FMR 0x003C
+
+#define CGU_PLL0_PHASE_DIVIDER_ENABLE \
+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
+#define CGU_PLL0_BYPASS \
+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
+#define CGU_PLL0_CFG_DSMSEL \
+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
+#define CGU_PLL0_CFG_FRAC_EN \
+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
+#define CGU_PLL1_SRC \
+ (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
+#define CGU_PLL2_PHASE_DIVIDER_ENABLE \
+ (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
+#define CGU_SYS_FPI_SEL (1 << 6)
+#define CGU_SYS_DDR_SEL 0x3
+#define CGU_PLL0_SRC (1 << 29)
+
+#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
+#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
+#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
+#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
+#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
+
+static unsigned int ltq_get_pll0_fdiv(void);
+
+static inline unsigned int
+get_input_clock(int pll)
+{
+ switch (pll) {
+ case 0:
+ if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
+ return BASIS_REQUENCY_USB;
+ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+ return BASIC_FREQUENCY_1;
+ else
+ return BASIC_FREQUENCY_2;
+ case 1:
+ if (CGU_PLL1_SRC)
+ return BASIS_REQUENCY_USB;
+ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+ return BASIC_FREQUENCY_1;
+ else
+ return BASIC_FREQUENCY_2;
+ case 2:
+ switch (CGU_PLL2_SRC) {
+ case 0:
+ return ltq_get_pll0_fdiv();
+ case 1:
+ return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
+ BASIC_FREQUENCY_1 :
+ BASIC_FREQUENCY_2;
+ case 2:
+ return BASIS_REQUENCY_USB;
+ }
+ default:
+ return 0;
+ }
+}
+
+static inline unsigned int
+cal_dsm(int pll, unsigned int num, unsigned int den)
+{
+ u64 res, clock = get_input_clock(pll);
+
+ res = num * clock;
+ do_div(res, den);
+ return res;
+}
+
+static inline unsigned int
+mash_dsm(int pll, unsigned int M, unsigned int N, unsigned int K)
+{
+ unsigned int num = ((N + 1) << 10) + K;
+ unsigned int den = (M + 1) << 10;
+
+ return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int
+ssff_dsm_1(int pll, unsigned int M, unsigned int N, unsigned int K)
+{
+ unsigned int num = ((N + 1) << 11) + K + 512;
+ unsigned int den = (M + 1) << 11;
+
+ return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int
+ssff_dsm_2(int pll, unsigned int M, unsigned int N, unsigned int K)
+{
+ unsigned int num = K >= 512 ?
+ ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
+ unsigned int den = (M + 1) << 12;
+
+ return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int
+dsm(int pll, unsigned int M, unsigned int N, unsigned int K,
+ unsigned int dsmsel, unsigned int phase_div_en)
+{
+ if (!dsmsel)
+ return mash_dsm(pll, M, N, K);
+ else if (!phase_div_en)
+ return mash_dsm(pll, M, N, K);
+ else
+ return ssff_dsm_2(pll, M, N, K);
+}
+
+static inline unsigned int
+ltq_get_pll0_fosc(void)
+{
+ if (CGU_PLL0_BYPASS)
+ return get_input_clock(0);
+ else
+ return !CGU_PLL0_CFG_FRAC_EN
+ ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
+ CGU_PLL0_CFG_DSMSEL,
+ CGU_PLL0_PHASE_DIVIDER_ENABLE)
+ : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
+ CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
+ CGU_PLL0_PHASE_DIVIDER_ENABLE);
+}
+
+static unsigned int
+ltq_get_pll0_fdiv(void)
+{
+ unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
+
+ return (ltq_get_pll0_fosc() + (div >> 1)) / div;
+}
+
+unsigned int
+ltq_get_io_region_clock(void)
+{
+ unsigned int ret = ltq_get_pll0_fosc();
+
+ switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
+ default:
+ case 0:
+ return (ret + 1) / 2;
+ case 1:
+ return (ret * 2 + 2) / 5;
+ case 2:
+ return (ret + 1) / 3;
+ case 3:
+ return (ret + 2) / 4;
+ }
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int
+ltq_get_fpi_bus_clock(int fpi)
+{
+ unsigned int ret = ltq_get_io_region_clock();
+
+ if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
+ ret >>= 1;
+ return ret;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int
+ltq_get_cpu_hz(void)
+{
+ switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+ case 0:
+ return CLOCK_333M;
+ case 4:
+ return DDR_HZ;
+ case 8:
+ return DDR_HZ << 1;
+ default:
+ return DDR_HZ >> 1;
+ }
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int
+ltq_get_fpi_hz(void)
+{
+ unsigned int ddr_clock = DDR_HZ;
+
+ if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+ return ddr_clock >> 1;
+ return ddr_clock;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
new file mode 100644
index 0000000..9d52c45
--- /dev/null
+++ b/arch/mips/lantiq/xway/ebu.c
@@ -0,0 +1,36 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * EBU - the external bus unit attaches PCI, NOR and NAND
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <lantiq_soc.h>
+
+/* all access to the ebu must be locked */
+DEFINE_SPINLOCK(ebu_lock);
+EXPORT_SYMBOL_GPL(ebu_lock);
+
+/* remapped base addr of the clock unit and external bus unit */
+void __iomem *ltq_ebu_membase;
+
+static int __init
+lantiq_ebu_init(void)
+{
+ /* remap ebu register range */
+ ltq_ebu_membase = ioremap_nocache(LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE);
+ if (!ltq_ebu_membase) {
+ printk(KERN_ERR "Failed to remap ebu memory\n");
+ unreachable();
+ }
+ return 0;
+}
+
+postcore_initcall(lantiq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
new file mode 100644
index 0000000..f9ff776
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -0,0 +1,203 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_GPIO_OUT 0x00
+#define LTQ_GPIO_IN 0x04
+#define LTQ_GPIO_DIR 0x08
+#define LTQ_GPIO_ALTSEL0 0x0C
+#define LTQ_GPIO_ALTSEL1 0x10
+#define LTQ_GPIO_OD 0x14
+
+#define PINS_PER_PORT 16
+#define MAX_PORTS 3
+
+#define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p)))
+#define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r)
+#define ltq_gpio_clearbit(m, r, p) ltq_w32_mask((1 << p), 0, m + r)
+
+struct ltq_gpio {
+ void __iomem *membase;
+ struct gpio_chip chip;
+};
+
+static struct ltq_gpio ltq_gpio_port[MAX_PORTS];
+
+int
+gpio_to_irq(unsigned int gpio)
+{
+ return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int
+irq_to_gpio(unsigned int gpio)
+{
+ return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+int
+ltq_gpio_request(unsigned int pin, unsigned int alt0,
+ unsigned int alt1, unsigned int dir, const char *name)
+{
+ int id = 0;
+
+ if (pin >= (MAX_PORTS * PINS_PER_PORT))
+ return -EINVAL;
+ if (gpio_request(pin, name)) {
+ pr_err("failed to setup lantiq gpio: %s\n", name);
+ return -EBUSY;
+ }
+ if (dir)
+ gpio_direction_output(pin, 1);
+ else
+ gpio_direction_input(pin);
+ while (pin >= PINS_PER_PORT) {
+ pin -= PINS_PER_PORT;
+ id++;
+ }
+ if (alt0)
+ ltq_gpio_setbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL0, pin);
+ else
+ ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL0, pin);
+ if (alt1)
+ ltq_gpio_setbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL1, pin);
+ else
+ ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL1, pin);
+ return 0;
+}
+EXPORT_SYMBOL(ltq_gpio_request);
+
+static void
+ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ if (value)
+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+ else
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+}
+
+static int
+ltq_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset);
+}
+
+static int
+ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+ return 0;
+}
+
+static int
+ltq_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+ ltq_gpio_set(chip, offset, value);
+ return 0;
+}
+
+static int
+ltq_gpio_req(struct gpio_chip *chip, unsigned offset)
+{
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
+ return 0;
+}
+
+static int
+ltq_gpio_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+
+ if (pdev->id >= MAX_PORTS) {
+ dev_err(&pdev->dev, "invalid gpio port %d\n",
+ pdev->id);
+ return -EINVAL;
+ }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
+ pdev->id);
+ return -ENOENT;
+ }
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev,
+ "failed to request memory for gpio port %d\n",
+ pdev->id);
+ return -EBUSY;
+ }
+ ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev,
+ res->start, resource_size(res));
+ if (!ltq_gpio_port[pdev->id].membase) {
+ dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n",
+ pdev->id);
+ return -ENOMEM;
+ }
+ ltq_gpio_port[pdev->id].chip.label = "ltq_gpio";
+ ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input;
+ ltq_gpio_port[pdev->id].chip.direction_output =
+ ltq_gpio_direction_output;
+ ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get;
+ ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
+ ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
+ ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
+ ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
+ platform_set_drvdata(pdev, <q_gpio_port[pdev->id]);
+ return gpiochip_add(<q_gpio_port[pdev->id].chip);
+}
+
+static struct platform_driver
+ltq_gpio_driver = {
+ .probe = ltq_gpio_probe,
+ .driver = {
+ .name = "ltq_gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+int __init
+ltq_gpio_init(void)
+{
+ int ret = platform_driver_register(<q_gpio_driver);
+
+ if (ret)
+ pr_info("ltq_gpio : Error registering platfom driver!");
+ return ret;
+}
+
+postcore_initcall(ltq_gpio_init);
diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
new file mode 100644
index 0000000..8ed6d09
--- /dev/null
+++ b/arch/mips/lantiq/xway/pmu.c
@@ -0,0 +1,57 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <lantiq_soc.h>
+
+/* PMU - the power management unit allows us to turn part of the core
+ * on and off
+ */
+
+/* the enable / disable register */
+#define LTQ_PMU_PWDCR 0x1C
+#define LTQ_PMU_PWDSR 0x20
+
+#define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y))
+#define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x))
+
+static void __iomem *ltq_pmu_membase;
+
+void
+ltq_pmu_enable(unsigned int module)
+{
+ int err = 1000000;
+
+ ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
+ do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
+
+ if (!err)
+ panic("activating PMU module failed!\n");
+}
+
+void
+ltq_pmu_disable(unsigned int module)
+{
+ ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
+}
+
+int __init
+ltq_pmu_init(void)
+{
+ ltq_pmu_membase = ioremap_nocache(LTQ_PMU_BASE_ADDR, LTQ_PMU_SIZE);
+ if (!ltq_pmu_membase) {
+ pr_err("Failed to remap pmu memory\n");
+ unreachable();
+ }
+ return 0;
+}
+
+core_initcall(ltq_pmu_init);
diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
new file mode 100644
index 0000000..a7faf77
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom-ase.c
@@ -0,0 +1,40 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_AMAZON_SE "Amazon_SE"
+
+#define PART_SHIFT 12
+#define PART_MASK 0x0FFFFFFF
+#define REV_SHIFT 28
+#define REV_MASK 0xF0000000
+
+void __init
+ltq_soc_detect(struct ltq_soc_info *i)
+{
+ i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+ i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+ switch (i->partnum) {
+ case SOC_ID_AMAZON_SE:
+ i->name = SOC_AMAZON_SE;
+ i->type = SOC_TYPE_AMAZON_SE;
+ break;
+
+ default:
+ unreachable();
+ break;
+ }
+}
diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
new file mode 100644
index 0000000..e7270e5
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom-xway.c
@@ -0,0 +1,55 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_DANUBE "Danube"
+#define SOC_TWINPASS "Twinpass"
+#define SOC_AR9 "AR9"
+
+#define PART_SHIFT 12
+#define PART_MASK 0x0FFFFFFF
+#define REV_SHIFT 28
+#define REV_MASK 0xF0000000
+
+void __init
+ltq_soc_detect(struct ltq_soc_info *i)
+{
+ i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+ i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+ switch (i->partnum) {
+ case SOC_ID_DANUBE1:
+ case SOC_ID_DANUBE2:
+ i->name = SOC_DANUBE;
+ i->type = SOC_TYPE_DANUBE;
+ break;
+
+ case SOC_ID_TWINPASS:
+ i->name = SOC_TWINPASS;
+ i->type = SOC_TYPE_DANUBE;
+ break;
+
+ case SOC_ID_ARX188:
+ case SOC_ID_ARX168:
+ case SOC_ID_ARX182:
+ i->name = SOC_AR9;
+ i->type = SOC_TYPE_AR9;
+ break;
+
+ default:
+ unreachable();
+ break;
+ }
+}
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
new file mode 100644
index 0000000..3ed78b8
--- /dev/null
+++ b/arch/mips/lantiq/xway/reset.c
@@ -0,0 +1,67 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+
+#include <lantiq_soc.h>
+
+#define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y))
+#define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x))
+
+/* register definitions */
+#define LTQ_RCU_RST 0x0010
+#define LTQ_RCU_RST_ALL 0x40000000
+
+/* remapped base addr of the reset control unit */
+static void __iomem *ltq_rcu_membase;
+
+static void
+ltq_machine_restart(char *command)
+{
+ pr_notice("System restart\n");
+ local_irq_disable();
+ ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
+ unreachable();
+}
+
+static void
+ltq_machine_halt(void)
+{
+ pr_notice("System halted.\n");
+ local_irq_disable();
+ unreachable();
+}
+
+static void
+ltq_machine_power_off(void)
+{
+ pr_notice("Please turn off the power now.\n");
+ local_irq_disable();
+ unreachable();
+}
+
+static int __init
+mips_reboot_setup(void)
+{
+ /* remap rcu register range */
+ ltq_rcu_membase = ioremap_nocache(LTQ_RCU_BASE_ADDR, LTQ_RCU_SIZE);
+ if (!ltq_rcu_membase) {
+ pr_err("Failed to remap rcu memory\n");
+ unreachable();
+ }
+
+ _machine_restart = ltq_machine_restart;
+ _machine_halt = ltq_machine_halt;
+ pm_power_off = ltq_machine_power_off;
+ return 0;
+}
+
+arch_initcall(mips_reboot_setup);
--
1.7.2.3
