The Lantiq family of SoCs have a EBU (External Bus Unit). This patch adds
the driver that allows us to use the EBU as a PCI controller. In order for
PCI to work the EBU is set to endianess swap all the data. In addition we
need to make use of SWAP_IO_SPACE for device->host DMA to work.
The clock of the PCI works in several modes (internal/external). If this
is not configured correctly the SoC will hang.
Changes in V2
* add handling for more than 1 pci device
* add properly handling and registration of gpios
* properly remap the memory regions
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
Signed-off-by: Ralph Hempel <ralph.hempel@xxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx
---
.../mips/include/asm/mach-lantiq/lantiq_platform.h | 46 +++
arch/mips/pci/Makefile | 1 +
arch/mips/pci/ops-lantiq.c | 119 ++++++++
arch/mips/pci/pci-lantiq.c | 303 ++++++++++++++++++++
arch/mips/pci/pci-lantiq.h | 18 ++
5 files changed, 487 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_platform.h
create mode 100644 arch/mips/pci/ops-lantiq.c
create mode 100644 arch/mips/pci/pci-lantiq.c
create mode 100644 arch/mips/pci/pci-lantiq.h
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
new file mode 100644
index 0000000..54e873c
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
@@ -0,0 +1,46 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#ifndef _LANTIQ_PLATFORM_H__
+#define _LANTIQ_PLATFORM_H__
+
+#include <linux/mtd/partitions.h>
+
+/* struct used to pass info to the pci core */
+enum {
+ PCI_CLOCK_INT = 0,
+ PCI_CLOCK_EXT
+};
+
+#define PCI_EXIN0 0x0001
+#define PCI_EXIN1 0x0002
+#define PCI_EXIN2 0x0004
+#define PCI_EXIN3 0x0008
+#define PCI_EXIN4 0x0010
+#define PCI_EXIN5 0x0020
+#define PCI_EXIN_MAX 6
+
+#define PCI_GNT1 0x0040
+#define PCI_GNT2 0x0080
+#define PCI_GNT3 0x0100
+#define PCI_GNT4 0x0200
+
+#define PCI_REQ1 0x0400
+#define PCI_REQ2 0x0800
+#define PCI_REQ3 0x1000
+#define PCI_REQ4 0x2000
+#define PCI_REQ_SHIFT 10
+#define PCI_REQ_MASK 0xf
+
+struct ltq_pci_data {
+ int clock;
+ int gpio;
+ int irq[16];
+};
+
+#endif
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c9209ca..4a5d1ae 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
+obj-$(CONFIG_SOC_XWAY) += pci-lantiq.o ops-lantiq.o
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
new file mode 100644
index 0000000..ee28018
--- /dev/null
+++ b/arch/mips/pci/ops-lantiq.c
@@ -0,0 +1,119 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <asm/addrspace.h>
+#include <linux/vmalloc.h>
+
+#include <lantiq_soc.h>
+
+#include "pci-lantiq.h"
+
+#define LTQ_PCI_CFG_BUSNUM_SHF 16
+#define LTQ_PCI_CFG_DEVNUM_SHF 11
+#define LTQ_PCI_CFG_FUNNUM_SHF 8
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+static int
+ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
+ unsigned int devfn, unsigned int where, u32 *data)
+{
+ unsigned long cfg_base;
+ unsigned long flags;
+ u32 temp;
+
+ /* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the
+ SoC itself */
+ if ((bus->number != 0) || ((devfn & 0xf8) > 0x78)
+ || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68))
+ return 1;
+
+ spin_lock_irqsave(&ebu_lock, flags);
+
+ cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+ cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn <<
+ LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
+
+ /* Perform access */
+ if (access_type == PCI_ACCESS_WRITE) {
+ ltq_w32(swab32(*data), ((u32 *)cfg_base));
+ } else {
+ *data = ltq_r32(((u32 *)(cfg_base)));
+ *data = swab32(*data);
+ }
+ wmb();
+
+ /* clean possible Master abort */
+ cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+ cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+ temp = ltq_r32(((u32 *)(cfg_base)));
+ temp = swab32(temp);
+ cfg_base = (unsigned long) ltq_pci_mapped_cfg;
+ cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+ ltq_w32(temp, ((u32 *)cfg_base));
+
+ spin_unlock_irqrestore(&ebu_lock, flags);
+
+ if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
+ return 1;
+
+ return 0;
+}
+
+int
+ltq_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data = 0;
+
+ if (ltq_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+int
+ltq_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data = 0;
+
+ if (size == 4) {
+ data = val;
+ } else {
+ if (ltq_pci_config_access(PCI_ACCESS_READ, bus,
+ devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ }
+
+ if (ltq_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
new file mode 100644
index 0000000..1dde03f
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.c
@@ -0,0 +1,303 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/platform_device.h>
+
+#include <asm/pci.h>
+#include <asm/gpio.h>
+#include <asm/addrspace.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+#include <lantiq_platform.h>
+
+#include "pci-lantiq.h"
+
+#define LTQ_PCI_CFG_BASE 0x17000000
+#define LTQ_PCI_CFG_SIZE 0x00008000
+#define LTQ_PCI_MEM_BASE 0x18000000
+#define LTQ_PCI_MEM_SIZE 0x02000000
+#define LTQ_PCI_IO_BASE 0x1AE00000
+#define LTQ_PCI_IO_SIZE 0x00200000
+
+#define PCI_CR_FCI_ADDR_MAP0 0x00C0
+#define PCI_CR_FCI_ADDR_MAP1 0x00C4
+#define PCI_CR_FCI_ADDR_MAP2 0x00C8
+#define PCI_CR_FCI_ADDR_MAP3 0x00CC
+#define PCI_CR_FCI_ADDR_MAP4 0x00D0
+#define PCI_CR_FCI_ADDR_MAP5 0x00D4
+#define PCI_CR_FCI_ADDR_MAP6 0x00D8
+#define PCI_CR_FCI_ADDR_MAP7 0x00DC
+#define PCI_CR_CLK_CTRL 0x0000
+#define PCI_CR_PCI_MOD 0x0030
+#define PCI_CR_PC_ARB 0x0080
+#define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
+#define PCI_CR_BAR11MASK 0x0044
+#define PCI_CR_BAR12MASK 0x0048
+#define PCI_CR_BAR13MASK 0x004C
+#define PCI_CS_BASE_ADDR1 0x0010
+#define PCI_CR_PCI_ADDR_MAP11 0x0064
+#define PCI_CR_FCI_BURST_LENGTH 0x00E8
+#define PCI_CR_PCI_EOI 0x002C
+#define PCI_CS_STS_CMD 0x0004
+
+#define PCI_MASTER0_REQ_MASK_2BITS 8
+#define PCI_MASTER1_REQ_MASK_2BITS 10
+#define PCI_MASTER2_REQ_MASK_2BITS 12
+#define INTERNAL_ARB_ENABLE_BIT 0
+
+#define LTQ_CGU_IFCCR 0x0018
+#define LTQ_CGU_PCICR 0x0034
+
+#define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
+#define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
+
+#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
+#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
+
+struct ltq_pci_gpio_map {
+ int pin;
+ int alt0;
+ int alt1;
+ int dir;
+ char *name;
+};
+
+/* the pci core can make use of the following gpios */
+static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
+ { 0, 1, 0, 0, "pci-exin0" },
+ { 1, 1, 0, 0, "pci-exin1" },
+ { 2, 1, 0, 0, "pci-exin2" },
+ { 39, 1, 0, 0, "pci-exin3" },
+ { 10, 1, 0, 0, "pci-exin4" },
+ { 9, 1, 0, 0, "pci-exin5" },
+ { 30, 1, 0, 1, "pci-gnt1" },
+ { 23, 1, 0, 1, "pci-gnt2" },
+ { 19, 1, 0, 1, "pci-gnt3" },
+ { 38, 1, 0, 1, "pci-gnt4" },
+ { 29, 1, 0, 0, "pci-req1" },
+ { 31, 1, 0, 0, "pci-req2" },
+ { 3, 1, 0, 0, "pci-req3" },
+ { 37, 1, 0, 0, "pci-req4" },
+};
+
+__iomem void *ltq_pci_mapped_cfg;
+static __iomem void *ltq_pci_membase;
+
+int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
+
+/* Since the PCI REQ pins can be reused for other functionality, make it
+ possible to exclude those from interpretation by the PCI controller */
+static int ltq_pci_req_mask = 0xf;
+
+static int *ltq_pci_irq_map;
+
+struct pci_ops ltq_pci_ops = {
+ .read = ltq_pci_read_config_dword,
+ .write = ltq_pci_write_config_dword
+};
+
+static struct resource pci_io_resource = {
+ .name = "pci io space",
+ .start = LTQ_PCI_IO_BASE,
+ .end = LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+ .name = "pci memory space",
+ .start = LTQ_PCI_MEM_BASE,
+ .end = LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_controller ltq_pci_controller = {
+ .pci_ops = <q_pci_ops,
+ .mem_resource = &pci_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &pci_io_resource,
+ .io_offset = 0x00000000UL,
+};
+
+int
+pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ if (ltqpci_plat_dev_init)
+ return ltqpci_plat_dev_init(dev);
+
+ return 0;
+}
+
+static u32
+ltq_calc_bar11mask(void)
+{
+ u32 mem, bar11mask;
+
+ /* BAR11MASK value depends on available memory on system. */
+ mem = num_physpages * PAGE_SIZE;
+ bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
+
+ return bar11mask;
+}
+
+static void
+ltq_pci_setup_gpio(int gpio)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++)
+ {
+ if(gpio & (1 << i))
+ {
+ ltq_gpio_request(ltq_pci_gpio_map[i].pin,
+ ltq_pci_gpio_map[i].alt0,
+ ltq_pci_gpio_map[i].alt1,
+ ltq_pci_gpio_map[i].dir,
+ ltq_pci_gpio_map[i].name);
+ }
+ }
+ ltq_gpio_request(21, 0, 0, 1, "pci-reset");
+ ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
+}
+
+static int __devinit
+ltq_pci_startup(struct ltq_pci_data *conf)
+{
+ u32 temp_buffer;
+
+ /* set clock to 33Mhz */
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
+
+ /* external or internal clock ? */
+ if (conf->clock) {
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16),
+ LTQ_CGU_IFCCR);
+ ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR);
+ } else {
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16),
+ LTQ_CGU_IFCCR);
+ ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR);
+ }
+
+ /* setup pci clock and gpis used by pci */
+ ltq_pci_setup_gpio(conf->gpio);
+
+ /* enable auto-switching between PCI and EBU */
+ ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
+
+ /* busy, i.e. configuration is not done, PCI access has to be retried */
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
+ wmb();
+ /* BUS Master/IO/MEM access */
+ ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
+
+ /* enable external 2 PCI masters */
+ temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
+ temp_buffer &= (~(ltq_pci_req_mask << 16));
+ /* enable internal arbiter */
+ temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
+ /* enable internal PCI master reqest */
+ temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
+
+ /* enable EBU request */
+ temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
+
+ /* enable all external masters request */
+ temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
+ ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
+ wmb();
+
+ /* setup BAR memory regions */
+ ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
+ ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
+ ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
+ ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
+ ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
+ ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
+ ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
+ ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
+ ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
+ ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
+ ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
+ ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
+ /* both TX and RX endian swap are enabled */
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
+ wmb();
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
+ PCI_CR_BAR12MASK);
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
+ PCI_CR_BAR13MASK);
+ /*use 8 dw burst length */
+ ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
+ ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
+ wmb();
+
+ /* setup irq line */
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
+
+ /* toggle reset pin */
+ __gpio_set_value(21, 0);
+ wmb();
+ mdelay(1);
+ __gpio_set_value(21, 1);
+ return 0;
+}
+
+int __init
+pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if(ltq_pci_irq_map[slot])
+ return ltq_pci_irq_map[slot];
+ printk("lq_pci: trying to map irq for unknown slot %d\n", slot);
+ return 0;
+}
+
+static int __devinit
+ltq_pci_probe(struct platform_device *pdev)
+{
+ struct ltq_pci_data *ltq_pci_data =
+ (struct ltq_pci_data *) pdev->dev.platform_data;
+ pci_probe_only = 0;
+ ltq_pci_irq_map = ltq_pci_data->irq;
+ ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
+ ltq_pci_mapped_cfg =
+ ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
+ ltq_pci_controller.io_map_base =
+ (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
+ ltq_pci_startup(ltq_pci_data);
+ register_pci_controller(<q_pci_controller);
+ return 0;
+}
+
+static struct platform_driver
+ltq_pci_driver = {
+ .probe = ltq_pci_probe,
+ .driver = {
+ .name = "ltq_pci",
+ .owner = THIS_MODULE,
+ },
+};
+
+int __init
+pcibios_init(void)
+{
+ int ret = platform_driver_register(<q_pci_driver);
+ if (ret)
+ printk(KERN_INFO "ltq_pci: Error registering platfom driver!");
+ return ret;
+}
+
+arch_initcall(pcibios_init);
diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
new file mode 100644
index 0000000..66bf6cd
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.h
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#ifndef _LTQ_PCI_H__
+#define _LTQ_PCI_H__
+
+extern __iomem void *ltq_pci_mapped_cfg;
+extern int ltq_pci_read_config_dword(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *val);
+extern int ltq_pci_write_config_dword(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 val);
+
+#endif
--
1.7.2.3
