The config options read out here are not stored in CFE, but only in
NVRAM on the devices. Remove reading from CFE and only access the NVRAM.
Reading out CFE does not harm, but is useless here.
Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
---
arch/mips/bcm47xx/setup.c | 28 +++++++++-------------------
1 files changed, 9 insertions(+), 19 deletions(-)
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index b1aee33..2c6bdad 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -32,7 +32,6 @@
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
-#include <asm/fw/cfe/cfe_api.h>
#include <asm/mach-bcm47xx/nvram.h>
struct ssb_bus ssb_bcm47xx;
@@ -82,42 +81,33 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
/* Fill sprom structure */
memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
iv->sprom.revision = 3;
- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.et0mac);
- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
str2eaddr(buf, iv->sprom.et1mac);
- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
return 0;
--
1.7.1
