Hello Wolfgang,
On Tuesday 23 November 2010 16:01:37 Wolfgang Grandegger wrote:
> Hi Florian,
>
> On 11/19/2010 11:46 AM, Florian Fainelli wrote:
> > Hello Wolfgang,
> >
> > On Friday 19 November 2010 11:29:45 Wolfgang Grandegger wrote:
> >> Hello Florian,
> >>
> >> On 11/18/2010 11:30 PM, Florian Fainelli wrote:
> >>> Hello Wolfgang,
> >>>
> >>> Le Thursday 18 November 2010 20:59:15, Wolfgang Grandegger a Ãcrit :
> >>>> Hello,
> >>>>
> >>>> I just realized that the v2.6.37-rc2 kernel does not boot any more on
> >>>> the Alchemy GPR board. It works fine with v2.6.36. It hangs in the
> >>>> probe function of the au1000_eth driver when probing the second
> >>>>
> >>>> ethernet port (eth1):
> >>>> au1000_eth_mii: probed
> >>>> au1000-eth au1000-eth.0: (unregistered net_device): attached PHY
> >>>> driver
> >>>>
> >>>> [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1) au1000-eth au1000-eth.0:
> >>>> eth0: Au1xx0 Ethernet found at 0x10500000, irq 35 au1000_eth:
> >>>> au1000_eth version 1.7 Pete Popov <ppopov@xxxxxxxxxxxxxxxxx> ...
> >>>> hangs ...
> >>>>
> >>>> Similar messages should follow for eth1. I narrowed down (bisect'ed)
> >>>> the
> >>>>
> >>>> problem to commit:
> >>>> commit d0e7cb5d401695809ba8c980124ab1d8c66efc8b
> >>>> Author: Florian Fainelli <florian@xxxxxxxxxxx>
> >>>> Date: Wed Sep 8 11:15:13 2010 +0000
> >>>>
> >>>> au1000-eth: remove volatiles, switch to I/O accessors
> >>>>
> >>>> Remove all the volatile keywords where they were used, switch to
> >>>> using
> >>>>
> >>>> the proper readl/writel accessors.
> >>>>
> >>>> Signed-off-by: Florian Fainelli <florian@xxxxxxxxxxx>
> >>>> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
> >>>>
> >>>> The kernel actually hangs when accessing "&aup->mac->mii_control" in
> >>>> au1000_mdio_read(), but only for eth1. Any idea what does go wrong?
> >>>
> >>> I do not understand so far while it hangs only for eth1. My device only
> >>> has one ethernet MAC, so I could not notice the problem. Looking at
> >>> this close, there are a couple of u32 const* usages in
> >>> au1000_mdio_{read,write} which are looking wrong to me now. Can you try
> >>> to remove these?
> >>
> >> That did not help.
> >
> > I suspected it, but thanks for the confirmation.
> >
> >>>> In principle, I do not want to access the MII regs of the MAC because
> >>>> eth0 and eth1 are connected to switches. But that's not possible, even
> >>>> with "aup->phy_static_config=1" and "aup->phy_addr=0".
> >>>
> >>> If you think this is another issue, I will fix it in another patch.
> >>
> >> Accessing the MII registers of the MAC should not hang the system even
> >> if I do not need to. First I want to understand why. Looks like a wired
> >> optimizer issue.
> >
> > I definitively agree, furthermore since there is a timeout for read and
> > write operations. I will look at the assembly and see if I can see
> > anything different.
>
> The attached patch fixes the issue. It's caused by a simple porting
> error. I'm going to prepare a proper patch later today.
Nasty and simple enough not to be noticed at compile time. Thanks for
debugging this. Feel free to add my:
Acked-by: Florian Fainelli <florian@xxxxxxxxxxx>
--
Florian
