On 09/15/2010 05:15 AM, Gregory Giraud wrote:
Hi,
I found your post on
http://www.linux-mips.org/archives/linux-mips/2010-02/msg00005.html.
I have the same problem on CN31xx with updating kernel to 2.6.29.
Have you solve it?
Yes.
The root filesystem binaries (including init) that come as part of the
Octeon SDK are not compatible with generic Linux kernels. Any attempt
to use the binaries of the SDK rootfs with a generic kernel will result
in the behavior you observe.
You need to use root filesystem binaries that are compatible with the
standard MIPS Linux ABIs. I would suggest Debian as a starting point.
David Daney
Thx
Grégory GIRAUD
Hi,
Currently I am working on a cavium CN56xx reference board using cavium
sdk 1.9.0. the linux kernel bundled in sdk is 2.6.27. which works fine
on the reference board.
but while i am trying to use the latest linux kernel, ie. 2.6.31,
2.6.32, 2.6.33-rc4, i encountered the same problem: "Kernel panic -
not syncing: Attempted to kill init!".
here is the boot log (initramfs is compiled into the kernel, the linux
config file is attached to this mail):
Bytes transferred = 66099593 (3f09989 hex), 1965 Kbytes/sec
argv[2]: root=/dev/ram0
argv[3]: rw
argv[4]: panic=1
argv[5]: init=/linuxrc
argv[6]: coremask=0xfff
argv[7]: console=ttyS1,115200
ELF file is 64 bit
Attempting to allocate memory for ELF segment: addr:
0xffffffff81100000 (adjusted to: 0x0000000001100000), size 0x25e6e30
Allocated memory for ELF segment: addr: 0xffffffff81100000, size 0x25e6e30
Processing PHDR 0
Loading 25b5a80 bytes at ffffffff81100000
Clearing 313b0 bytes at ffffffff836b5a80
## Loading Linux kernel with entry point: 0xffffffff81105f10 ...
Bootloader: Done loading app on coremask: 0xfff
Linux version 2.6.31 (root@R710) (gcc version 4.3.3 (Cavium Networks
Version: 1_9_0 build 80) ) #17 SMP PREEMPT Tue Jan 19 01:19:220
CVMSEG size: 2 cache lines (256 bytes)
CPU revision is: 000d0409 (Cavium Octeon)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 00000000022ce000 @ 00000000013e8000 (usable)
memory: 000000000c800000 @ 0000000003700000 (usable)
memory: 0000000011800000 @ 0000000020000000 (usable)
Wasting 326144 bytes for tracking 5096 unused pages
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x000013e8 -> 0x00031800
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x000013e8 -> 0x000036b6
0: 0x00003700 -> 0x0000ff00
0: 0x00020000 -> 0x00031800
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128701
Kernel command line: bootoctlinux 0x20000000 root=/dev/ram0 rw
panic=1 init=/linuxrc coremask=0xfff console=ttyS1,115200
PID hash table entries: 2048 (order: 11, 16384 bytes)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets,
linesize 128 bytes.
Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
Memory: 477572k/527160k available (2185k kernel code, 49004k reserved,
788k data, 35640k init, 0k highmem)
NR_IRQS:152
console [ttyS1] enabled
Calibrating delay using timer specific routine.. 1602.37 BogoMIPS (lpj=3204755)
Security Framework initialized
Mount-cache hash table entries: 256
Checking for the daddi bug... no.
SMP: Booting CPU01 (CoreId 1)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.69 BogoMIPS (lpj=3203395)
SMP: Booting CPU02 (CoreId 2)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.80 BogoMIPS (lpj=3203612)
SMP: Booting CPU03 (CoreId 3)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.68 BogoMIPS (lpj=3203378)
SMP: Booting CPU04 (CoreId 4)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.80 BogoMIPS (lpj=3203610)
SMP: Booting CPU05 (CoreId 5)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.68 BogoMIPS (lpj=3203375)
SMP: Booting CPU06 (CoreId 6)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.80 BogoMIPS (lpj=3203606)
SMP: Booting CPU07 (CoreId 7)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.68 BogoMIPS (lpj=3203376)
SMP: Booting CPU08 (CoreId 8)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.80 BogoMIPS (lpj=3203607)
SMP: Booting CPU09 (CoreId 9)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.68 BogoMIPS (lpj=3203376)
SMP: Booting CPU10 (CoreId 10)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.80 BogoMIPS (lpj=3203605)
SMP: Booting CPU11 (CoreId 11)...
CPU revision is: 000d0409 (Cavium Octeon)
Calibrating delay using timer specific routine.. 1601.61 BogoMIPS (lpj=3203229)
Brought up 12 CPUs
NET: Registered protocol family 16
bio: create slab<bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 933
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS1 at MMIO 0x1180000000c00 (irq = 59) is a OCTEON
brd: module loaded
loop: module loaded
TCP cubic registered
NET: Registered protocol family 17
Bootbus flash: Setting flash for 64MB flash at 0x1bc00000
drivers/mtd/chips/cfi_probe.c:166
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 4 MTD partitions on "phys_mapped_flash":
0x000000080000-0x000000680000 : "O60H BOOT"
0x000000680000-0x000003f80000 : "O60H ROOT"
0x000000000000-0x000000080000 : "U-BOOT"
0x000003f80000-0x000004000000 : "U-BOOT(env)"
Freeing unused kernel memory: 35640k freed
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 1 seconds..
U-Boot 1.1.1 (Development build) (Build time: May 25 2009 - 16:32:17)
EBH5600 board revision major:1, minor:0
OCTEON CN5650-NSP pass 2.1, Core clock: 800 MHz, DDR clock: 400 MHz
(800 Mhz data rate)
Warning: Board descriptor tuple not found in eeprom, using defaults
DRAM: 4096 MB
Flash: 64 MB
Clearing DRAM........ done
BIST check passed.
My question is, what is the current status of octeon plus cn56xx
support in official linux kernel release? Is cavium cn56xx reference
board supported? If the answer is 'yes', how can I make the latest
kernel and boot it successfully on the reference board?
Thanks very much. I will be glad to provide more information if required.
Zhuang Yuyao
