I build kernel 2.6.33 for TI AR7 cpu 7200 version. boot halt on console init stage/ gcc 4.3.3 ============================== linwork:/opt/mipsel32/usr/bin# ./mipsel-linux-gcc-4.3.3 -v Using built-in specs. Target: mipsel-uclibc-linux Configured with: /Acorp/buildroot-2010.02-rc1/output/toolchain/gcc-4.3.3/configure --prefix=/usr --build=i386-cross-linux-uclibc --host=i386-cross-linux-uclibc --target=mipsel-uclibc-linux --enable-languages=c,c++ --with-sysroot=/opt/mipsel32/ --with-build-time-tools=/opt/mipsel32//usr/mipsel-uclibc-linux/bin --disable-__cxa_atexit --enable-target-optspace --with-gnu-ld --disable-libssp --enable-tls --enable-shared --with-gmp=/Acorp/buildroot-2010.02-rc1/output/toolchain/gmp --with-mpfr=/Acorp/buildroot-2010.02-rc1/output/toolchain/mpfr --disable-nls --enable-threads --disable-multilib --disable-decimal-float --with-abi=32 --with-tune=mips1 --disable-largefile --with-endian=little,big --with-pkgversion='Buildroot 2010.02-rc1' --with-bugurl=http://bugs.buildroot.net/ : (reconfigured) /Acorp/buildroot-2010.02-rc1/output/toolchain/gcc-4.3.3/configure --prefix=/usr --build=i386-cross-linux-uclibc --host=i386-cross-linux-uclibc --target=mipsel-uclibc-linux --enable-languages=c,c++ --with-sysroot=/opt/mipsel32/ --with-build-time-tools=/opt/mipsel32//usr/mipsel-uclibc-linux/bin --disable-__cxa_atexit --enable-target-optspace --with-gnu-ld --disable-libssp --enable-tls --enable-shared --with-gmp=/Acorp/buildroot-2010.02-rc1/output/toolchain/gmp --with-mpfr=/Acorp/buildroot-2010.02-rc1/output/toolchain/mpfr --disable-nls --enable-threads --disable-multilib --disable-decimal-float --with-abi=32 --with-tune=mips1 --disable-largefile --with-pkgversion='Buildroot 2010.02-rc1' --with-bugurl=http://bugs.buildroot.net/ Thread model: posix gcc version 4.3.3 (Buildroot 2010.02-rc1) =========== kernel cfg CONFIG_MIPS=y CONFIG_AR7=y CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_BOOT_RAW=y CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_GENERIC_GPIO=y CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_NO_EXCEPT_FILL=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_MIPS32_R1=y CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_HZ_250=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # General setup CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_LZMA=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # RCU Subsystem CONFIG_TINY_RCU=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # Kernel Performance Events And Counters CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # GCOV-based kernel profiling CONFIG_SLOW_WORK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_INLINE_SPIN_UNLOCK=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y # Bus options (PCI, PCMCIA, EISA, ISA, TC) CONFIG_MMU=y # Executable file formats CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_TRAD_SIGNALS=y # Power management options CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # Device Drivers # Generic Driver Options CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=0 # CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y CONFIG_MTD_AR7_PARTS=y # RAM/ROM/Flash chip drivers CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # Input device support CONFIG_INPUT=y # Character devices CONFIG_VT=y CONFIG_HW_CONSOLE=y # Serial drivers CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # Non-8250 serial port support CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # PPS support CONFIG_PPS=y CONFIG_PPS_DEBUG=y CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers CONFIG_AR7_WDT=y CONFIG_SSB_POSSIBLE=y # Console display driver support CONFIG_DUMMY_CONSOLE=y CONFIG_ACCESSIBILITY=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_DEBUG=y # RTC interfaces CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_TEST=y # on-CPU RTC drivers CONFIG_AUXDISPLAY=y CONFIG_UIO=y # TI VLYNQ CONFIG_VLYNQ=y CONFIG_STAGING=y CONFIG_STAGING_EXCLUDE_BUILD=y # File systems CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # Caches CONFIG_FSCACHE=y CONFIG_FSCACHE_DEBUG=y # Pseudo filesystems CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # Kernel hacking CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y CONFIG_HAVE_ARCH_KGDB=y CONFIG_EARLY_PRINTK=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlyprintk=ttyS0,9600n,keep" # Security options CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # Crypto core or helper CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_WORKQUEUE=y # Hash modes CONFIG_CRYPTO_HMAC=y # Digest CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y # Ciphers CONFIG_CRYPTO_AES=y # Compression CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=y # Library routines CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y =========== booting process: =========== (psbl) Booting... Linux version 2.6.33 (root@linwork) (gcc version 4.3.3 (Buildroot 2010.02-rc1) ) #1 Wed Mar 3 15:31:18 OMST 2010 bootconsole [early0] enabled CPU revision is: 00018448 (MIPS 4KEc) TI AR7 (TNETD7200), ID: 0x002b, Revision: 0x11 Determined physical RAM map: memory: 01000000 @ 14000000 (usable) Zone PFN ranges: Normal 0x00014000 -> 0x00015000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00014000 -> 0x00015000 Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 Kernel command line: console=ttyS0,9600n8 earlyprintk=ttyS0,9600 PID hash table entries: 64 (order: -4, 256 bytes) Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes. Primary data cache 8kB, 4-way, VIPT, no aliases, linesize 16 bytes Memory: 13164k/16384k available (1325k kernel code, 3220k reserved, 408k data, 120k init, 0k highmem) NR_IRQS:256 Console: colour dummy device 80x25 ============== stop booting... what wrong ???? kernels from open-wrt booting with log: ============================== (psbl) Booting... Linux version 2.6.26.8 (agb@arrakis) (gcc version 4.1.2) #1 Wed Dec 2 15:14:35 UTC 2009 console [early0] enabled CPU revision is: 00018448 (MIPS 4KEc) Clocks: Sync 2:1 mode Clocks: Setting CPU clock Adjusted requested frequency 211000000 to 211968000 Clocks: base = 35328000, frequency = 211968000, prediv = 1, postdiv = 1, postdiv2 = -1, mul = 6 Clocks: Setting DSP clock Clocks: base = 25000000, frequency = 105984000, prediv = 1, postdiv = 2, postdiv2 = 1, mul = 10 Clocks: Setting USB clock Adjusted requested frequency 48000000 to 47863741 Clocks: base = 105984000, frequency = 48000000, prediv = 1, postdiv = 31, postdiv2 = -1, mul = 14 TI AR7 (TNETD7200), ID: 0x002b, Revision: 0x11 Determined physical RAM map: memory: 01000000 @ 14000000 (usable) Initrd not found or empty - disabling initrd Zone PFN ranges: Normal 81920 -> 86016 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 81920 -> 86016 Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 Kernel command line: init=/etc/preinit rootfstype=squashfs,jffs2, console=ttyS0,9600n8 Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes. Primary data cache 8kB, 4-way, VIPT, no aliases, linesize 16 bytes PID hash table entries: 64 (order: 6, 256 bytes) Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Memory: 12560k/16384k available (2001k kernel code, 3824k reserved, 417k data, 124k init, 0k highmem) SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Mount-cache hash table entries: 512 net_namespace: 644 bytes NET: Registered protocol family 16 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 512 bind 512) TCP reno registered NET: Registered protocol family 1 squashfs: version 3.0 (2006/03/15) Phillip Lougher Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 24 io scheduler noop registered io scheduler deadline registered (default) Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7 -- View this message in context: http://old.nabble.com/TI-AR7-7200---no-boot-tp27766331p27766331.html Sent from the linux-mips main mailing list archive at Nabble.com.
