Ales Mulej wrote:
Hi,
I'm porting linux(2.6.31.6) to the Wintegra WINHDP2 refrence board.
As a refrence I already have an old BSP from Wintegra based on kernel
2.6.10.
During the kernel start up process I receive following error:
Reserved instruction in kernel code[#1]:
Cpu 0
$ 0 : 00000000 1000fc00 802be630 00000001
$ 4 : 802be670 802be674 ffffffff 802f4d4c
$ 8 : 1000fc01 1000001f 00000001 0000002b
$12 : 00000000 000001f5 07a0d380 00000000
$16 : 00000000 00000000 00000000 1000fc00
$20 : 802e9674 bd030f04 3e490000 00000a72
$24 : 00000008 8000167c
$28 : 802ba000 802bbd30 ffffffff 802f4d4c
Hi : 000000fb
Lo : 00000001
epc : 801013a0 handle_ri_int+0x18/0x38
Not tainted
ra : 802f4d4c __log_buf+0x0/0x20000
Status: 1000fc03 KERNEL EXL IE
Cause : 50808000
PrId : 00019365 (MIPS 24Kc)
Modules linked in:
Process swapper (pid: 0, threadinfo=802ba000, task=802bc000, tls=00000000)
Stack : 1000fc00 1000001f 00000001 0000002b 00000000 000001f5 00000000
1000fc00
802be630 00000001 802be670 802be674 ffffffff 802f4d4c 1000fc00
1000001f
00000001 0000002b 00000000 000001f5 07a0d380 00000000 00000000
00000000
00000000 1000fc00 802e9674 bd030f04 3e490000 00000a72 00000008
8000167c
802bbe94 802a2954 802ba000 802bbde0 ffffffff 802f4d4c 1000fc02
000000fb
...
Call Trace:
[<801013a0>] handle_ri_int+0x18/0x38
Code: 01094025 3908001e 40886000 <00000040> 00000040 00000040
... ssnop ssnop ssnop ...
One would think a 'PrId : 00019365 (MIPS 24Kc)' would execute those.
The cause value indicates an 'Interrupt' but you are somehow executing
in handle_ri_int, so it could be that multiple exceptions are messing up
the OOPS output...
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill the idle task!
Does anybody know where is the problem?
I suspect, that the problem is in my interrupt routine, because I
receive this error as soon as the tick timer start's up.
Regards,
Ales
