Hi Nick:
Hi all:
2009/11/23 loody <miloody@xxxxxxxxx>:
> Hi Nick:
> Hi all:
>
> thanks for your kind reply ^^
> 2009/11/20 Nick Clifton <nickc@xxxxxxxxxx>:
>> Hi miloody,
>>
>>> 1. How gcc know where ld is?
>>
>> Check out the "Directory Options" part of the gcc documentation (under the
>> "Invoking GCC" section).
>>
>> If you add "-v" to your gcc command line you will see the path that gcc has
>> found to the linker executable. (Actually you are more likely to see it
>> executing a program called "collect2" which will then go on to invoke the
>> linker).
>>
>>> As far as I know, gcc and binutils are 2 independent packages, so
>>> there must be some setting let gcc know where the ld is, right?
>>
>> They are separate packages yes, and in theory they are independent but often
>> there are quite close ties between them. For example some features of gcc
>> might only be enabled if it is known that the assembler is gas or that the
>> linker is the binutils linker.
>>
>> Plus it is common for toolchain builders to use a combined source tree that
>> contains both the gcc and the binutils sources. (And often sources for
>> other projects as well such as gdb or newlib). With a combined source tree
>> it is possible to use a single configure command line to configure both gcc
>> and binutils at the same time. In this way they are built with the same
>> expectations about where sources will be located.
>>
>>> But I cannot see the connection in my configures of binutils and gcc as
>>> below:
>>> binutils configure:
>>
>>> --prefix=/root/bare_metal/x-tools/mipsel-unknown-elf
>>
>> This option is key - it is telling gcc (the compiler driver program) the
>> root of the path it should use when trying to locate executables such as cc1
>> or the linker.
>>
>>
>>> 2. what are the difference of elf32-littlemips and elf32-tradlittlemips?
>>
>> I'll leave that one to a MIPS expert to answer.
> I have something wired and I have no idea whether it comes with these
> 2 different mips link format.
>
> 1. I have 2 mips-toolchains, tool A, one support elf32-tradlittlemips
> with gcc 3.4.4, and, tool B, another support elf32-littlemips with
> gcc4.2.1.
> 2. I compile my test program with these 2 toolchain with "-c -g "
> option, and i can see source codes embedded in *.o, the elf output I
> build.
> 3. but after I use linker to link them together, I can see the source
> codes embedded in the final ELF output with tool A build, but tool B
> cannot.
>
> I know the version of these toolchains is quite different, 4.2.1 vs 3.4.4.
> But everything seems fine before final linking, and the parameters i
> pass to ld are the same, except the output format they support.
>
> Is there any document or steps can tell me how to generate binutils
> which supports elf32-tradlittlemips such that I can do the comparison?
>
> BTW, the reason why I want to see source code is I want to debug my
> test program with ddd or cgdb such tools.
> If I cannot see the source code content but I can see the function
> name, can i sill use the above tools to debug.
> If I can do the source level debug, is there any setting or file I
> have to generate?
>
> I attach my result and commands at the end of letter for your reference.
> appreciate your help,
> miloody
>
>
> /* source codes not embedded in the elf*/
> 80000298 <main>:
> 80000298: 27bdffd8 addiu sp,sp,-40
> 8000029c: afbf0024 sw ra,36(sp)
> 800002a0: afbe0020 sw s8,32(sp)
> 800002a4: 03a0f021 move s8,sp
> 800002a8: 24020017 li v0,23
> 800002ac: afc20018 sw v0,24(s8)
> 800002b0: 24020020 li v0,32
> 800002b4: afc20014 sw v0,20(s8)
> 800002b8: 2402002c li v0,44
> 800002bc: afc20010 sw v0,16(s8)
> 800002c0: 8fc30018 lw v1,24(s8)
> 800002c4: 8fc20014 lw v0,20(s8)
> 800002c8: 00621821 addu v1,v1,v0
> 800002cc: 8fc20010 lw v0,16(s8)
> 800002d0: 00621021 addu v0,v1,v0
> 800002d4: afc20018 sw v0,24(s8)
> 800002d8: 24040100 li a0,256
> 800002dc: 0c0000d8 jal 80000360 <malloc>
> 800002e0: 00000000 nop
> 800002e4: afc2001c sw v0,28(s8)
> 800002e8: 0c00009e jal 80000278 <newline>
> 800002ec: 00000000 nop
> 800002f0: 03c0e821 move sp,s8
> 800002f4: 8fbf0024 lw ra,36(sp)
> 800002f8: 8fbe0020 lw s8,32(sp)
> 800002fc: 27bd0028 addiu sp,sp,40
>
> /*source code is embedded in elf*/
> int main()
> //int c_entry()
> {
> 90: 27bdffd8 addiu sp,sp,-40
> 94: afbf0024 sw ra,36(sp)
> 98: afbe0020 sw s8,32(sp)
> 9c: 03a0f021 move s8,sp
> char * point;
> int a,b,c;
> a =23;
> a0: 24020017 li v0,23
> a4: afc20018 sw v0,24(s8)
> b = 32;
> a8: 24020020 li v0,32
> ac: afc20014 sw v0,20(s8)
> c = 44;
> b0: 2402002c li v0,44
> b4: afc20010 sw v0,16(s8)
> a = a+b+c;
> b8: 8fc30018 lw v1,24(s8)
> bc: 8fc20014 lw v0,20(s8)
> c0: 00621821 addu v1,v1,v0
> c4: 8fc20010 lw v0,16(s8)
> c8: 00621021 addu v0,v1,v0
> cc: afc20018 sw v0,24(s8)
>
> /*my commands that I can see source */
> mipsel-unknown-elf-gcc -g -G 0 -mips32r2 -fno-omit-frame-pointer
> -fno-optimize-sibling-calls -I./include -I./device/display
> -I./device/fatfs -I./device/misc -I./device/ntstrg -I./device/ntuart
> -I./device/ntxsub -I./device/vpu
> -I/media/sdb1/newlib-1.17.0/build/mipsel/include -D_ASSEMBLER_ -c
> init.S
> mipsel-unknown-elf-gcc -g -G 0 -mips32r2 -fno-omit-frame-pointer
> -fno-optimize-sibling-calls -I./include -I./device/display
> -I./device/fatfs -I./device/misc -I./device/ntstrg -I./device/ntuart
> -I./device/ntxsub -I./device/vpu
> -I/media/sdb1/newlib-1.17.0/build/mipsel/include -D_ASSEMBLER_ -c
> reset.S
> mipsel-unknown-elf-gcc -g -G 0 -mips32r2 -fno-omit-frame-pointer
> -fno-optimize-sibling-calls -I./include -I./device/display
> -I./device/fatfs -I./device/misc -I./device/ntstrg -I./device/ntuart
> -I./device/ntxsub -I./device/vpu
> -I/media/sdb1/newlib-1.17.0/build/mipsel/include -c atexit.c
> mipsel-unknown-elf-gcc -g -G 0 -mips32r2 -fno-omit-frame-pointer
> -fno-optimize-sibling-calls -I./include -I./device/display
> -I./device/fatfs -I./device/misc -I./device/ntstrg -I./device/ntuart
> -I./device/ntxsub -I./device/vpu
> -I/media/sdb1/newlib-1.17.0/build/mipsel/include -c main.c
> mipsel-unknown-elf-ld -T ./link.xn -o TestCode.elf -Map TestCode.map
> --oformat elf32-littlemips init.o reset.o atexit.o main.o -static
> -nostdlib -L/media/sdb1/newlib-1.17.0/build/mipsel/lib
> -L/root/bare_metal/x-tools/mipsel-unknown-elf/lib/gcc/mipsel-unknown-elf/4.2.4
> -lc -lnullmon -lgcc
> rm -f TestCode.dla
> rm -f TestCode.dnm
>
> /* commands that I cannot see source
> sde-gcc -g -G 0 -mips32r2 -fno-omit-frame-pointer
> -fno-optimize-sibling-calls -I./include -I./device/display
> -I./device/fatfs -I./device/misc -I./device/ntstrg -I./device/ntuart
> -I./device/ntxsub -I./device/vpu
> -I/media/sdb1/newlib-1.17.0/build/mipsel/include -D_ASSEMBLER_ -c
> init.S
> sde-gcc -g -G 0 -mips32r2 -fno-omit-frame-pointer
> -fno-optimize-sibling-calls -I./include -I./device/display
> -I./device/fatfs -I./device/misc -I./device/ntstrg -I./device/ntuart
> -I./device/ntxsub -I./device/vpu
> -I/media/sdb1/newlib-1.17.0/build/mipsel/include -D_ASSEMBLER_ -c
> reset.S
> sde-gcc -g -G 0 -mips32r2 -fno-omit-frame-pointer
> -fno-optimize-sibling-calls -I./include -I./device/display
> -I./device/fatfs -I./device/misc -I./device/ntstrg -I./device/ntuart
> -I./device/ntxsub -I./device/vpu
> -I/media/sdb1/newlib-1.17.0/build/mipsel/include -c atexit.c
> sde-gcc -g -G 0 -mips32r2 -fno-omit-frame-pointer
> -fno-optimize-sibling-calls -I./include -I./device/display
> -I./device/fatfs -I./device/misc -I./device/ntstrg -I./device/ntuart
> -I./device/ntxsub -I./device/vpu
> -I/media/sdb1/newlib-1.17.0/build/mipsel/include -c main.c
> sde-ld -T ./link.xn -o TestCode.elf -Map TestCode.map --oformat
> elf32-tradlittlemips init.o reset.o atexit.o main.o -static -nostdlib
> -L/media/sdb1/newlib-1.17.0/build/mipsel/lib
> -L/root/bare_metal/x-tools/sde/lib/gcc/3.4.4/el -lc -lnullmon -lgcc
> rm -f TestCode.dla
Below is the information I get from binutils 2.11.90 release note:
Changes from binutils 2.11.90.0.4:
1. Update from binutils 2001 0414.
2. Fix an ia64 assembler bug.
3. Change Linux/MIPS to use the SVR4 MIPS ABI instead of the IRIX ABI.
since there are no supports for the IRIX ABI in glibc. The current
Linux/MIPS targets are elf64-tradlittlemips for little endian MIPS
instead of elf32-littlemips and elf64-tradbigmips for big endian MIPS
instead of elf32-bigmips. Glibc, gcc and kernel may have to be modified
for this change.
it seems elf32-littlemips and elf32-bigmips are obsoleted.
but I still get my ld support elf32-littlemips/elf32-bigmips.
what config should I enable for support elf32-tradlittlemips/elf32-tradbigmips?
appreciate your help,
miloody
PS:
below are my configure and ld verbose
configure
/root/toolchain/targets/src/binutils-2.17/configure
--build=i486-build_pc-linux-gnu --host=i486-build_pc-linux-gnu
--target=mipsel-unknown-elf
--prefix=/root/bare_metal/x-tools/mipsel-unknown-elf --disable-nls
--disable-multilib --disable-werror --with-float=soft
--with-sysroot=/root/bare_metal/x-tools/mipsel-unknown-elf/mipsel-unknown-elf//sys-root
verbose
# ./bin/mipsel-unknown-elf-ld --verbose
GNU ld version 2.17
Supported emulations:
elf32elmip
using internal linker script:
==================================================
/* Script for -z combreloc: combine and sort reloc sections */
OUTPUT_FORMAT("elf32-littlemips", "elf32-bigmips",
"elf32-littlemips")
