This patch added the following subdrivers: backlight, hotkey, video
output, thermal cooling, hwmon and battery.
Signed-off-by: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
---
arch/mips/kernel/setup.c | 1 +
arch/mips/loongson/Kconfig | 18 +
arch/mips/loongson/lemote-2f/Makefile | 1 +
arch/mips/loongson/lemote-2f/ec_kb3310b.h | 150 +++
arch/mips/loongson/lemote-2f/yeeloong_laptop.c | 1354 ++++++++++++++++++++++++
5 files changed, 1524 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/loongson/lemote-2f/yeeloong_laptop.c
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index bd55f71..b1e1272 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -60,6 +60,7 @@ struct boot_mem_map boot_mem_map;
static char command_line[COMMAND_LINE_SIZE];
char arcs_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+EXPORT_SYMBOL(arcs_cmdline);
/*
* mips_io_port_base is the begin of the address space to which x86 style
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 1041336..34a94b0 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -112,4 +112,22 @@ config LEMOTE_LYNLOONG2F_PDEV
This driver adds the lynloong specific backlight driver and platform
driver(mainly the suspend support).
+config LEMOTE_YEELOONG2F_PDEV
+ tristate "Lemote YeeLoong Platform Specific Driver"
+ depends on LEMOTE_MACH2F
+ default m
+ select INPUT_EVDEV
+ select HWMON
+ select VIDEO_OUTPUT_CONTROL
+ select THERMAL
+ select BACKLIGHT_CLASS_DEVICE
+ select SYS_SUPPORTS_APM_EMULATION
+ help
+ YeeLoong netbook is a mini laptop made by Lemote, which is basically
+ compatible to FuLoong2F mini PC, but It has an extra Embedded
+ Controller(kb3310b) for battery, hotkey, backlight, temperature and
+ fan management.
+
+ This driver adds the YeeLoong Platform Specific support.
+
endif # LOONGSON_PLATFORM_DEVICES
diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile
index 81a97d0..4e8bf5d 100644
--- a/arch/mips/loongson/lemote-2f/Makefile
+++ b/arch/mips/loongson/lemote-2f/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
# Platform Drivers
#
obj-$(CONFIG_LEMOTE_LYNLOONG2F_PDEV) += lynloong_pc.o
+obj-$(CONFIG_LEMOTE_YEELOONG2F_PDEV) += yeeloong_laptop.o
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
index 4d29953..00530e3 100644
--- a/arch/mips/loongson/lemote-2f/ec_kb3310b.h
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
@@ -19,6 +19,13 @@ extern int ec_query_seq(unsigned char cmd);
extern int ec_query_event_num(void);
extern int ec_get_event_num(void);
+typedef int (*sci_handler) (int status);
+extern sci_handler yeeloong_report_lid_status;
+extern int yeeloong_install_sci_handler(int event, sci_handler handler);
+extern int yeeloong_uninstall_sci_handler(int event, sci_handler handler);
+
+#define SCI_IRQ_NUM 0x0A
+
/*
* The following registers are determined by the EC index configuration.
* 1, fill the PORT_HIGH as EC register high part.
@@ -44,4 +51,147 @@ extern int ec_get_event_num(void);
#define CMD_GET_EVENT_NUM 0x84
#define CMD_PROGRAM_PIECE 0xda
+/* temperature & fan registers */
+#define REG_TEMPERATURE_VALUE 0xF458 /* current temperature value */
+#define REG_FAN_AUTO_MAN_SWITCH 0xF459 /* fan auto/manual control switch */
+#define BIT_FAN_AUTO 0
+#define BIT_FAN_MANUAL 1
+#define REG_FAN_CONTROL 0xF4D2 /* fan control */
+#define BIT_FAN_CONTROL_ON (1 << 0)
+#define BIT_FAN_CONTROL_OFF (0 << 0)
+#define REG_FAN_STATUS 0xF4DA /* fan status */
+#define BIT_FAN_STATUS_ON (1 << 0)
+#define BIT_FAN_STATUS_OFF (0 << 0)
+#define REG_FAN_SPEED_HIGH 0xFE22 /* fan speed high byte */
+#define REG_FAN_SPEED_LOW 0xFE23 /* fan speed low byte */
+#define REG_FAN_SPEED_LEVEL 0xF4CC /* fan speed level, from 1 to 5 */
+/* fan speed divider */
+#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
+
+/* battery registers */
+#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
+#define REG_BAT_DESIGN_CAP_LOW 0xF77E
+#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
+#define REG_BAT_FULLCHG_CAP_LOW 0xF781
+#define REG_BAT_DESIGN_VOL_HIGH 0xF782
+#define REG_BAT_DESIGN_VOL_LOW 0xF783
+#define REG_BAT_CURRENT_HIGH 0xF784
+#define REG_BAT_CURRENT_LOW 0xF785
+#define REG_BAT_VOLTAGE_HIGH 0xF786
+#define REG_BAT_VOLTAGE_LOW 0xF787
+#define REG_BAT_TEMPERATURE_HIGH 0xF788
+#define REG_BAT_TEMPERATURE_LOW 0xF789
+#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
+#define REG_BAT_RELATIVE_CAP_LOW 0xF493
+#define REG_BAT_VENDOR 0xF4C4
+#define FLAG_BAT_VENDOR_SANYO 0x01
+#define FLAG_BAT_VENDOR_SIMPLO 0x02
+#define REG_BAT_CELL_COUNT 0xF4C6
+#define FLAG_BAT_CELL_3S1P 0x03
+#define FLAG_BAT_CELL_3S2P 0x06
+#define REG_BAT_CHARGE 0xF4A2
+#define FLAG_BAT_CHARGE_DISCHARGE 0x01
+#define FLAG_BAT_CHARGE_CHARGE 0x02
+#define FLAG_BAT_CHARGE_ACPOWER 0x00
+#define REG_BAT_STATUS 0xF4B0
+#define BIT_BAT_STATUS_LOW (1 << 5)
+#define BIT_BAT_STATUS_DESTROY (1 << 2)
+#define BIT_BAT_STATUS_FULL (1 << 1)
+#define BIT_BAT_STATUS_IN (1 << 0)
+#define REG_BAT_CHARGE_STATUS 0xF4B1
+#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
+#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
+#define REG_BAT_STATE 0xF482
+#define BIT_BAT_STATE_CHARGING (1 << 1)
+#define BIT_BAT_STATE_DISCHARGING (1 << 0)
+#define REG_BAT_POWER 0xF440
+#define BIT_BAT_POWER_S3 (1 << 2)
+#define BIT_BAT_POWER_ON (1 << 1)
+#define BIT_BAT_POWER_ACIN (1 << 0)
+
+/* other registers */
+/* Audio: rd/wr */
+#define REG_AUDIO_VOLUME 0xF46C /* volume level */
+#define REG_AUDIO_MUTE 0xF4E7
+#define REG_AUDIO_BEEP 0xF4D0
+/* USB port power or not: rd/wr */
+#define REG_USB0_FLAG 0xF461
+#define REG_USB1_FLAG 0xF462
+#define REG_USB2_FLAG 0xF463
+#define BIT_USB_FLAG_ON 1
+#define BIT_USB_FLAG_OFF 0
+/* LID */
+#define REG_LID_DETECT 0xF4BD
+#define BIT_LID_DETECT_ON 1
+#define BIT_LID_DETECT_OFF 0
+/* CRT */
+#define REG_CRT_DETECT 0xF4AD
+#define BIT_CRT_DETECT_PLUG 1
+#define BIT_CRT_DETECT_UNPLUG 0
+/* LCD backlight brightness adjust: 9 levels */
+#define REG_DISPLAY_BRIGHTNESS 0xF4F5
+/* Black screen Status */
+#define BIT_DISPLAY_LCD_ON 1
+#define BIT_DISPLAY_LCD_OFF 0
+/* LCD backlight control: off/restore */
+#define REG_BACKLIGHT_CTRL 0xF7BD
+#define BIT_BACKLIGHT_ON 1
+#define BIT_BACKLIGHT_OFF 0
+/* Reset the machine auto-clear: rd/wr */
+#define REG_RESET 0xF4EC
+#define BIT_RESET_ON 1
+#define BIT_RESET_OFF 0
+/* Light the led: rd/wr */
+#define REG_LED 0xF4C8
+#define BIT_LED_RED_POWER (1 << 0)
+#define BIT_LED_ORANGE_POWER (1 << 1)
+#define BIT_LED_GREEN_CHARGE (1 << 2)
+#define BIT_LED_RED_CHARGE (1 << 3)
+#define BIT_LED_NUMLOCK (1 << 4)
+/* Test led mode, all led on/off */
+#define REG_LED_TEST 0xF4C2
+#define BIT_LED_TEST_IN 1
+#define BIT_LED_TEST_OUT 0
+/* Camera on/off */
+#define REG_CAMERA_STATUS 0xF46A
+#define BIT_CAMERA_STATUS_ON 1
+#define BIT_CAMERA_STATUS_OFF 0
+#define REG_CAMERA_CONTROL 0xF7B7
+#define BIT_CAMERA_CONTROL_OFF 0
+#define BIT_CAMERA_CONTROL_ON 1
+/* Wlan Status */
+#define REG_WLAN 0xF4FA
+#define BIT_WLAN_ON 1
+#define BIT_WLAN_OFF 0
+#define REG_DISPLAY_LCD 0xF79F
+
+/* SCI Event Number from EC */
+enum {
+ EVENT_LID = 0x23, /* press the lid or not */
+ EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */
+ EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
+ EVENT_OVERTEMP, /* Over-temperature happened */
+ EVENT_CRT_DETECT, /* CRT is connected */
+ EVENT_CAMERA, /* Camera is on or off */
+ EVENT_USB_OC2, /* USB2 Over Current occurred */
+ EVENT_USB_OC0, /* USB0 Over Current occurred */
+ EVENT_BLACK_SCREEN, /* Black screen is on or off */
+ EVENT_AUDIO_MUTE, /* Mute is on or off */
+ EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
+ EVENT_AC_BAT, /* ac & battery relative issue */
+ EVENT_AUDIO_VOLUME, /* Volume adjust */
+ EVENT_WLAN, /* Wlan is on or off */
+ EVENT_END
+};
+
+enum {
+ BIT_AC_BAT_BAT_IN = 0,
+ BIT_AC_BAT_AC_IN,
+ BIT_AC_BAT_INIT_CAP,
+ BIT_AC_BAT_CHARGE_MODE,
+ BIT_AC_BAT_STOP_CHARGE,
+ BIT_AC_BAT_BAT_LOW,
+ BIT_AC_BAT_BAT_FULL
+};
+
#endif /* !_EC_KB3310B_H */
diff --git a/arch/mips/loongson/lemote-2f/yeeloong_laptop.c b/arch/mips/loongson/lemote-2f/yeeloong_laptop.c
new file mode 100644
index 0000000..ff74f7f
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/yeeloong_laptop.c
@@ -0,0 +1,1354 @@
+/*
+ * Driver for YeeLoong laptop extras
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/video_output.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+#include <linux/apm-emulation.h>
+
+#include <asm/bootinfo.h> /* for arcs_cmdline */
+
+#include <loongson.h>
+
+#include <cs5536/cs5536.h>
+#include "ec_kb3310b.h"
+
+#define DRIVER_VERSION "0.1"
+
+/* backlight subdriver */
+#define MAX_BRIGHTNESS 8
+
+static int yeeloong_set_brightness(struct backlight_device *bd)
+{
+ unsigned int level, current_level;
+ static unsigned int old_level;
+
+ level = (bd->props.fb_blank == FB_BLANK_UNBLANK &&
+ bd->props.power == FB_BLANK_UNBLANK) ?
+ bd->props.brightness : 0;
+
+ if (level > MAX_BRIGHTNESS)
+ level = MAX_BRIGHTNESS;
+ else if (level < 0)
+ level = 0;
+
+ /* avoid tune the brightness when the EC is tuning it */
+ current_level = ec_read(REG_DISPLAY_BRIGHTNESS);
+ if ((old_level == current_level) && (old_level != level))
+ ec_write(REG_DISPLAY_BRIGHTNESS, level);
+ old_level = level;
+
+ return 0;
+}
+
+static int yeeloong_get_brightness(struct backlight_device *bd)
+{
+ return (int)ec_read(REG_DISPLAY_BRIGHTNESS);
+}
+
+static struct backlight_ops backlight_ops = {
+ .get_brightness = yeeloong_get_brightness,
+ .update_status = yeeloong_set_brightness,
+};
+
+static struct backlight_device *yeeloong_backlight_dev;
+
+static int yeeloong_backlight_init(struct device *dev)
+{
+ int ret;
+
+ yeeloong_backlight_dev = backlight_device_register("backlight0", dev,
+ NULL, &backlight_ops);
+
+ if (IS_ERR(yeeloong_backlight_dev)) {
+ ret = PTR_ERR(yeeloong_backlight_dev);
+ yeeloong_backlight_dev = NULL;
+ return ret;
+ }
+
+ yeeloong_backlight_dev->props.max_brightness = MAX_BRIGHTNESS;
+ yeeloong_backlight_dev->props.brightness =
+ yeeloong_get_brightness(yeeloong_backlight_dev);
+ backlight_update_status(yeeloong_backlight_dev);
+
+ return 0;
+}
+
+static void yeeloong_backlight_exit(void)
+{
+ if (yeeloong_backlight_dev) {
+ backlight_device_unregister(yeeloong_backlight_dev);
+ yeeloong_backlight_dev = NULL;
+ }
+}
+
+/* hwmon subdriver */
+
+/* pwm(auto/manual) enable or not */
+static int get_fan_pwm_enable(void)
+{
+ /* This get the fan control method: auto or manual */
+ return ec_read(REG_FAN_AUTO_MAN_SWITCH);
+}
+
+static void set_fan_pwm_enable(int manual)
+{
+ ec_write(REG_FAN_AUTO_MAN_SWITCH, !!manual);
+}
+
+static int get_fan_pwm(void)
+{
+ /* fan speed level */
+ return ec_read(REG_FAN_SPEED_LEVEL);
+}
+
+static void set_fan_pwm(int value)
+{
+ int status;
+
+ value = SENSORS_LIMIT(value, 0, 3);
+
+ /* if value is not ZERO, we should ensure it is on */
+ if (value != 0) {
+ status = ec_read(REG_FAN_STATUS);
+ if (status == 0)
+ ec_write(REG_FAN_CONTROL, BIT_FAN_CONTROL_ON);
+ }
+ /* 0xf4cc is for writing */
+ ec_write(REG_FAN_SPEED_LEVEL, value);
+}
+
+static int get_fan_rpm(void)
+{
+ int value = 0;
+
+ value = FAN_SPEED_DIVIDER /
+ (((ec_read(REG_FAN_SPEED_HIGH) & 0x0f) << 8) |
+ ec_read(REG_FAN_SPEED_LOW));
+
+ return value;
+}
+
+static int get_cpu_temp(void)
+{
+ int value;
+
+ value = ec_read(REG_TEMPERATURE_VALUE);
+
+ if (value & (1 << 7))
+ value = (value & 0x7f) - 128;
+ else
+ value = value & 0xff;
+
+ return value * 1000;
+}
+
+static int get_battery_temp(void)
+{
+ int value;
+
+ value = (ec_read(REG_BAT_TEMPERATURE_HIGH) << 8) |
+ (ec_read(REG_BAT_TEMPERATURE_LOW));
+
+ return value * 1000;
+}
+
+static int get_battery_current(void)
+{
+ int value;
+
+ value = (ec_read(REG_BAT_CURRENT_HIGH) << 8) |
+ (ec_read(REG_BAT_CURRENT_LOW));
+
+ if (value & 0x8000)
+ value = 0xffff - value;
+
+ return value;
+}
+
+static int get_battery_voltage(void)
+{
+ int value;
+
+ value = (ec_read(REG_BAT_VOLTAGE_HIGH) << 8) |
+ (ec_read(REG_BAT_VOLTAGE_LOW));
+
+ return value;
+}
+
+
+static int parse_arg(const char *buf, unsigned long count, int *val)
+{
+ if (!count)
+ return 0;
+ if (sscanf(buf, "%i", val) != 1)
+ return -EINVAL;
+ return count;
+}
+
+static ssize_t store_sys_hwmon(void (*set) (int), const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0)
+ set(value);
+ return rv;
+}
+
+static ssize_t show_sys_hwmon(int (*get) (void), char *buf)
+{
+ return sprintf(buf, "%d\n", get());
+}
+
+#define CREATE_SENSOR_ATTR(_name, _mode, _set, _get) \
+ static ssize_t show_##_name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+ { \
+ return show_sys_hwmon(_set, buf); \
+ } \
+ static ssize_t store_##_name(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+ { \
+ return store_sys_hwmon(_get, buf, count); \
+ } \
+ static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0);
+
+CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, get_fan_rpm, NULL);
+CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR, get_fan_pwm, set_fan_pwm);
+CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, get_fan_pwm_enable,
+ set_fan_pwm_enable);
+CREATE_SENSOR_ATTR(temp1_input, S_IRUGO, get_cpu_temp, NULL);
+CREATE_SENSOR_ATTR(temp2_input, S_IRUGO, get_battery_temp, NULL);
+CREATE_SENSOR_ATTR(curr1_input, S_IRUGO, get_battery_current, NULL);
+CREATE_SENSOR_ATTR(in1_input, S_IRUGO, get_battery_voltage, NULL);
+
+static ssize_t
+show_name(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "yeeloong\n");
+}
+
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
+static struct attribute *hwmon_attributes[] = {
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_name.dev_attr.attr,
+ NULL
+};
+
+static struct attribute_group hwmon_attribute_group = {
+ .attrs = hwmon_attributes
+};
+
+struct device *yeeloong_hwmon_dev;
+
+static int yeeloong_hwmon_init(struct device *dev)
+{
+ int ret;
+
+ yeeloong_hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(yeeloong_hwmon_dev)) {
+ printk(KERN_INFO "Could not register yeeloong hwmon device\n");
+ yeeloong_hwmon_dev = NULL;
+ return PTR_ERR(yeeloong_hwmon_dev);
+ }
+ ret = sysfs_create_group(&yeeloong_hwmon_dev->kobj,
+ &hwmon_attribute_group);
+ if (ret) {
+ sysfs_remove_group(&yeeloong_hwmon_dev->kobj,
+ &hwmon_attribute_group);
+ hwmon_device_unregister(yeeloong_hwmon_dev);
+ yeeloong_hwmon_dev = NULL;
+ }
+ /* ensure fan is set to auto mode */
+ set_fan_pwm_enable(BIT_FAN_AUTO);
+
+ return 0;
+}
+
+static void yeeloong_hwmon_exit(void)
+{
+ if (yeeloong_hwmon_dev) {
+ sysfs_remove_group(&yeeloong_hwmon_dev->kobj,
+ &hwmon_attribute_group);
+ hwmon_device_unregister(yeeloong_hwmon_dev);
+ yeeloong_hwmon_dev = NULL;
+ }
+}
+
+/* video output subdriver */
+
+static int lcd_video_output_get(struct output_device *od)
+{
+ return ec_read(REG_DISPLAY_LCD);
+}
+
+static int lcd_video_output_set(struct output_device *od)
+{
+ unsigned long status = od->request_state;
+ int value;
+
+ if (status == BIT_DISPLAY_LCD_ON) {
+ /* open LCD */
+ outb(0x31, 0x3c4);
+ value = inb(0x3c5);
+ value = (value & 0xf8) | 0x03;
+ outb(0x31, 0x3c4);
+ outb(value, 0x3c5);
+ /* open backlight */
+ ec_write(REG_BACKLIGHT_CTRL, BIT_BACKLIGHT_ON);
+ } else {
+ /* close backlight */
+ ec_write(REG_BACKLIGHT_CTRL, BIT_BACKLIGHT_OFF);
+ /* close LCD */
+ outb(0x31, 0x3c4);
+ value = inb(0x3c5);
+ value = (value & 0xf8) | 0x02;
+ outb(0x31, 0x3c4);
+ outb(value, 0x3c5);
+ }
+
+ return 0;
+}
+
+static struct output_properties lcd_output_properties = {
+ .set_state = lcd_video_output_set,
+ .get_status = lcd_video_output_get,
+};
+
+static int crt_video_output_get(struct output_device *od)
+{
+ return ec_read(REG_CRT_DETECT);
+}
+
+static int crt_video_output_set(struct output_device *od)
+{
+ unsigned long status = od->request_state;
+ int value;
+
+ if (status == BIT_CRT_DETECT_PLUG) {
+ if (ec_read(REG_CRT_DETECT) == BIT_CRT_DETECT_PLUG) {
+ /* open CRT */
+ outb(0x21, 0x3c4);
+ value = inb(0x3c5);
+ value &= ~(1 << 7);
+ outb(0x21, 0x3c4);
+ outb(value, 0x3c5);
+ }
+ } else {
+ /* close CRT */
+ outb(0x21, 0x3c4);
+ value = inb(0x3c5);
+ value |= (1 << 7);
+ outb(0x21, 0x3c4);
+ outb(value, 0x3c5);
+ }
+
+ return 0;
+}
+
+static struct output_properties crt_output_properties = {
+ .set_state = crt_video_output_set,
+ .get_status = crt_video_output_get,
+};
+
+struct output_device *lcd_output_dev, *crt_output_dev;
+
+static void lcd_vo_set(int status)
+{
+ lcd_output_dev->request_state = status;
+ lcd_video_output_set(lcd_output_dev);
+}
+
+static void crt_vo_set(int status)
+{
+ crt_output_dev->request_state = status;
+ crt_video_output_set(crt_output_dev);
+}
+
+static int crt_detect_handler(int status)
+{
+ if (status == BIT_CRT_DETECT_PLUG) {
+ crt_vo_set(BIT_CRT_DETECT_PLUG);
+ lcd_vo_set(BIT_DISPLAY_LCD_OFF);
+ } else {
+ lcd_vo_set(BIT_DISPLAY_LCD_ON);
+ crt_vo_set(BIT_CRT_DETECT_UNPLUG);
+ }
+ return status;
+}
+
+static int black_screen_handler(int status)
+{
+ char *p = NULL, *ec_ver = NULL;
+
+ ec_ver = strstr(arcs_cmdline, "EC_VER=");
+ if (ec_ver) {
+ p = strstr(ec_ver, " ");
+ if (p)
+ *p = '\0';
+ }
+
+ /* Seems EC(>=PQ1D26) does this job for us, we can not do it again,
+ * otherwise, the brightness will not resume! */
+ if ((ec_ver == NULL) || strncasecmp(ec_ver, "EC_VER=PQ1D26", 64) < 0)
+ lcd_vo_set(status);
+
+ return status;
+}
+
+static int display_toggle_handler(int status)
+{
+ static int video_output_status;
+
+ /* only enable switch video output button
+ * when CRT is connected */
+ if (ec_read(REG_CRT_DETECT) == BIT_CRT_DETECT_UNPLUG)
+ return 0;
+ /* 0. no CRT connected: LCD on, CRT off
+ * 1. BOTH on
+ * 2. LCD off, CRT on
+ * 3. BOTH off
+ * 4. LCD on, CRT off
+ */
+ video_output_status++;
+ if (video_output_status > 4)
+ video_output_status = 1;
+
+ switch (video_output_status) {
+ case 1:
+ lcd_vo_set(BIT_DISPLAY_LCD_ON);
+ crt_vo_set(BIT_CRT_DETECT_PLUG);
+ break;
+ case 2:
+ lcd_vo_set(BIT_DISPLAY_LCD_OFF);
+ crt_vo_set(BIT_CRT_DETECT_PLUG);
+ break;
+ case 3:
+ lcd_vo_set(BIT_DISPLAY_LCD_OFF);
+ crt_vo_set(BIT_CRT_DETECT_UNPLUG);
+ break;
+ case 4:
+ lcd_vo_set(BIT_DISPLAY_LCD_ON);
+ crt_vo_set(BIT_CRT_DETECT_UNPLUG);
+ break;
+ default:
+ /* ensure LCD is on */
+ lcd_vo_set(BIT_DISPLAY_LCD_ON);
+ break;
+ }
+ return video_output_status;
+}
+
+static int yeeloong_vo_init(struct device *dev)
+{
+ int ret;
+
+ /* register video output device: lcd, crt */
+ lcd_output_dev = video_output_register("LCD", dev, NULL,
+ &lcd_output_properties);
+
+ if (IS_ERR(lcd_output_dev)) {
+ ret = PTR_ERR(lcd_output_dev);
+ lcd_output_dev = NULL;
+ return ret;
+ }
+ /* ensure LCD is on by default */
+ lcd_vo_set(1);
+
+ crt_output_dev = video_output_register("CRT", dev, NULL,
+ &crt_output_properties);
+
+ if (IS_ERR(crt_output_dev)) {
+ ret = PTR_ERR(crt_output_dev);
+ crt_output_dev = NULL;
+ return ret;
+ }
+ /* close CRT by default, and will be enabled
+ * when the CRT connectting event reported by SCI */
+ crt_vo_set(0);
+
+ /* install event handlers */
+ yeeloong_install_sci_handler(EVENT_CRT_DETECT,
+ crt_detect_handler);
+ yeeloong_install_sci_handler(EVENT_BLACK_SCREEN,
+ black_screen_handler);
+ yeeloong_install_sci_handler(EVENT_DISPLAY_TOGGLE,
+ display_toggle_handler);
+
+ return 0;
+}
+
+static void yeeloong_vo_exit(void)
+{
+ /* uninstall event handlers */
+ yeeloong_uninstall_sci_handler(EVENT_CRT_DETECT,
+ crt_detect_handler);
+ yeeloong_uninstall_sci_handler(EVENT_BLACK_SCREEN,
+ black_screen_handler);
+ yeeloong_uninstall_sci_handler(EVENT_DISPLAY_TOGGLE,
+ display_toggle_handler);
+
+ if (lcd_output_dev) {
+ video_output_unregister(lcd_output_dev);
+ lcd_output_dev = NULL;
+ }
+ if (crt_output_dev) {
+ video_output_unregister(crt_output_dev);
+ crt_output_dev = NULL;
+ }
+}
+
+/* Thermal cooling devices subdriver */
+
+static int video_get_max_state(struct thermal_cooling_device *cdev, unsigned
+ long *state)
+{
+ *state = MAX_BRIGHTNESS;
+ return 0;
+}
+
+static int video_get_cur_state(struct thermal_cooling_device *cdev, unsigned
+ long *state)
+{
+ static struct backlight_device *bd;
+
+ bd = (struct backlight_device *)cdev->devdata;
+
+ *state = yeeloong_get_brightness(bd);
+
+ return 0;
+}
+
+static int video_set_cur_state(struct thermal_cooling_device *cdev, unsigned
+ long state)
+{
+ static struct backlight_device *bd;
+
+ bd = (struct backlight_device *)cdev->devdata;
+
+ yeeloong_backlight_dev->props.brightness = state;
+ backlight_update_status(bd);
+
+ return 0;
+}
+
+static struct thermal_cooling_device_ops video_cooling_ops = {
+ .get_max_state = video_get_max_state,
+ .get_cur_state = video_get_cur_state,
+ .set_cur_state = video_set_cur_state,
+};
+
+static struct thermal_cooling_device *yeeloong_thermal_cdev;
+
+/* TODO: register fan, cpu as the cooling devices */
+static int yeeloong_thermal_init(struct device *dev)
+{
+ int ret;
+
+ if (!dev)
+ return -1;
+
+ yeeloong_thermal_cdev = thermal_cooling_device_register("LCD", dev,
+ &video_cooling_ops);
+
+ if (IS_ERR(yeeloong_thermal_cdev)) {
+ ret = PTR_ERR(yeeloong_thermal_cdev);
+ return ret;
+ }
+
+ ret = sysfs_create_link(&dev->kobj,
+ &yeeloong_thermal_cdev->device.kobj,
+ "thermal_cooling");
+ if (ret) {
+ printk(KERN_ERR "Create sysfs link\n");
+ return ret;
+ }
+ ret = sysfs_create_link(&yeeloong_thermal_cdev->device.kobj,
+ &dev->kobj, "device");
+ if (ret) {
+ printk(KERN_ERR "Create sysfs link\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void yeeloong_thermal_exit(struct device *dev)
+{
+ if (yeeloong_thermal_cdev) {
+ if (dev)
+ sysfs_remove_link(&dev->kobj, "thermal_cooling");
+ sysfs_remove_link(&yeeloong_thermal_cdev->device.kobj,
+ "device");
+ thermal_cooling_device_unregister(yeeloong_thermal_cdev);
+ yeeloong_thermal_cdev = NULL;
+ }
+}
+
+/* hotkey input subdriver */
+
+static struct input_dev *yeeloong_hotkey_dev;
+static int event, status;
+
+struct key_entry {
+ char type; /* See KE_* below */
+ int event; /* event from SCI */
+ u16 keycode; /* KEY_* or SW_* */
+};
+
+enum { KE_KEY, KE_SW, KE_END };
+
+static struct key_entry yeeloong_keymap[] = {
+ {KE_SW, EVENT_LID, SW_LID},
+ /* SW_VIDEOOUT_INSERT? not included in hald-addon-input! */
+ {KE_KEY, EVENT_CRT_DETECT, KEY_PROG1},
+ /* Seems battery subdriver should report it */
+ {KE_KEY, EVENT_OVERTEMP, KEY_PROG2},
+ /*{KE_KEY, EVENT_AC_BAT, KEY_BATTERY},*/
+ {KE_KEY, EVENT_CAMERA, KEY_CAMERA}, /* Fn + ESC */
+ {KE_KEY, EVENT_SLEEP, KEY_SLEEP}, /* Fn + F1 */
+ /* Seems not clear? not included in hald-addon-input! */
+ {KE_KEY, EVENT_BLACK_SCREEN, KEY_PROG3}, /* Fn + F2 */
+ {KE_KEY, EVENT_DISPLAY_TOGGLE, KEY_SWITCHVIDEOMODE}, /* Fn + F3 */
+ {KE_KEY, EVENT_AUDIO_MUTE, KEY_MUTE}, /* Fn + F4 */
+ {KE_KEY, EVENT_WLAN, KEY_WLAN}, /* Fn + F5 */
+ {KE_KEY, EVENT_DISPLAY_BRIGHTNESS, KEY_BRIGHTNESSUP}, /* Fn + up */
+ {KE_KEY, EVENT_DISPLAY_BRIGHTNESS, KEY_BRIGHTNESSDOWN}, /* Fn + down */
+ {KE_KEY, EVENT_AUDIO_VOLUME, KEY_VOLUMEUP}, /* Fn + right */
+ {KE_KEY, EVENT_AUDIO_VOLUME, KEY_VOLUMEDOWN}, /* Fn + left */
+ {KE_END, 0}
+};
+
+static int yeeloong_lid_update_status(int status)
+{
+ input_report_switch(yeeloong_hotkey_dev, SW_LID, !status);
+ input_sync(yeeloong_hotkey_dev);
+
+ return status;
+}
+
+static void yeeloong_hotkey_update_status(int key)
+{
+ input_report_key(yeeloong_hotkey_dev, key, 1);
+ input_sync(yeeloong_hotkey_dev);
+ input_report_key(yeeloong_hotkey_dev, key, 0);
+ input_sync(yeeloong_hotkey_dev);
+}
+
+static int get_event_keycode(void)
+{
+ struct key_entry *key;
+
+ for (key = yeeloong_keymap; key->type != KE_END; key++) {
+ if (key->event != event)
+ continue;
+ else {
+ if (EVENT_DISPLAY_BRIGHTNESS == event) {
+ static int old_brightness_status = -1;
+ /* current status > old one, means up */
+ if ((status < old_brightness_status)
+ || (0 == status))
+ key++;
+ old_brightness_status = status;
+ } else if (EVENT_AUDIO_VOLUME == event) {
+ static int old_volume_status = -1;
+ if ((status < old_volume_status)
+ || (0 == status))
+ key++;
+ old_volume_status = status;
+ }
+ break;
+ }
+ }
+ return key->keycode;
+}
+
+void yeeloong_report_key(void)
+{
+ int keycode;
+
+ keycode = get_event_keycode();
+
+ if (keycode == SW_LID)
+ yeeloong_lid_update_status(status);
+ else
+ yeeloong_hotkey_update_status(keycode);
+}
+
+enum { NO_REG, MUL_REG, REG_END };
+
+int event_reg[15] = {
+ REG_LID_DETECT, /* press the lid or not */
+ NO_REG, /* Fn+F3 for display switch */
+ NO_REG, /* Fn+F1 for entering sleep mode */
+ MUL_REG, /* Over-temperature happened */
+ REG_CRT_DETECT, /* CRT is connected */
+ REG_CAMERA_STATUS, /* Camera is on or off */
+ REG_USB2_FLAG, /* USB2 Over Current occurred */
+ REG_USB0_FLAG, /* USB0 Over Current occurred */
+ REG_DISPLAY_LCD, /* Black screen is on or off */
+ REG_AUDIO_MUTE, /* Mute is on or off */
+ REG_DISPLAY_BRIGHTNESS, /* LCD backlight brightness adjust */
+ NO_REG, /* ac & battery relative issue */
+ REG_AUDIO_VOLUME, /* Volume adjust */
+ REG_WLAN, /* Wlan is on or off */
+ REG_END
+};
+
+static int ec_get_event_status(void)
+{
+ int reg;
+
+ reg = event_reg[event - EVENT_LID];
+
+ if (reg == NO_REG)
+ return 1;
+ else if (reg == MUL_REG) {
+ if (event == EVENT_OVERTEMP) {
+ return (ec_read(REG_BAT_CHARGE_STATUS) &
+ BIT_BAT_CHARGE_STATUS_OVERTEMP) >> 2;
+ }
+ } else if (reg != REG_END)
+ return ec_read(reg);
+
+ return -1;
+}
+
+static sci_handler event_handler[15];
+
+int yeeloong_install_sci_handler(int event, sci_handler handler)
+{
+ if (event_handler[event - EVENT_LID] != NULL) {
+ printk(KERN_INFO "There is a handler installed for event: %d\n",
+ event);
+ return -1;
+ }
+ event_handler[event - EVENT_LID] = handler;
+
+ return 0;
+}
+EXPORT_SYMBOL(yeeloong_install_sci_handler);
+
+int yeeloong_uninstall_sci_handler(int event, sci_handler handler)
+{
+ if (event_handler[event - EVENT_LID] == NULL) {
+ printk(KERN_INFO "There is no handler installed for event: %d\n",
+ event);
+ return -1;
+ }
+ if (event_handler[event - EVENT_LID] != handler) {
+ printk(KERN_INFO "You can not uninstall the handler installed by others\n");
+ return -1;
+ }
+ event_handler[event - EVENT_LID] = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL(yeeloong_uninstall_sci_handler);
+
+static void yeeloong_event_action(void)
+{
+ sci_handler handler;
+
+ handler = event_handler[event - EVENT_LID];
+
+ if (handler == NULL)
+ return;
+
+ if (event == EVENT_CAMERA)
+ status = handler(3);
+ else
+ status = handler(status);
+}
+
+/*
+ * sci main interrupt routine
+ *
+ * we will do the query and get event number together so the interrupt routine
+ * should be longer than 120us now at least 3ms elpase for it.
+ */
+static irqreturn_t sci_irq_handler(int irq, void *dev_id)
+{
+ int ret;
+
+ if (SCI_IRQ_NUM != irq) {
+ printk(KERN_ERR "%s: spurious irq.\n", __func__);
+ return IRQ_NONE;
+ }
+
+ /* query the event number */
+ ret = ec_query_event_num();
+ if (ret < 0) {
+ printk(KERN_ERR "%s: return: %d\n", __func__, ret);
+ return IRQ_NONE;
+ }
+
+ event = ec_get_event_num();
+ if (event < 0) {
+ printk(KERN_ERR "%s: return: %d\n", __func__, event);
+ return IRQ_NONE;
+ }
+
+ printk(KERN_INFO "sci event number: 0x%x\n", event);
+
+ /* parse the event number and wake the queue */
+ if ((event != 0x00) && (event != 0xff)) {
+ /* get status of current event */
+ status = ec_get_event_status();
+ printk(KERN_INFO "%s: status: %d\n", __func__, status);
+ if (status == -1)
+ return IRQ_NONE;
+ /* execute relative actions */
+ yeeloong_event_action();
+ /* report current key */
+ yeeloong_report_key();
+ }
+ return IRQ_HANDLED;
+}
+
+/*
+ * config and init some msr and gpio register properly.
+ */
+static int sci_irq_init(void)
+{
+ u32 hi, lo;
+ u32 gpio_base;
+ int ret = 0;
+ unsigned long flags;
+
+ /* get gpio base */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo);
+ gpio_base = lo & 0xff00;
+
+ /* filter the former kb3310 interrupt for security */
+ ret = ec_query_event_num();
+ if (ret) {
+ printk(KERN_ERR "%s: failed.\n", __func__);
+ return ret;
+ }
+
+ /* for filtering next number interrupt */
+ udelay(10000);
+
+ /* set gpio native registers and msrs for GPIO27 SCI EVENT PIN
+ * gpio :
+ * input, pull-up, no-invert, event-count and value 0,
+ * no-filter, no edge mode
+ * gpio27 map to Virtual gpio0
+ * msr :
+ * no primary and lpc
+ * Unrestricted Z input to IG10 from Virtual gpio 0.
+ */
+ local_irq_save(flags);
+ _rdmsr(0x80000024, &hi, &lo);
+ lo &= ~(1 << 10);
+ _wrmsr(0x80000024, hi, lo);
+ _rdmsr(0x80000025, &hi, &lo);
+ lo &= ~(1 << 10);
+ _wrmsr(0x80000025, hi, lo);
+ _rdmsr(0x80000023, &hi, &lo);
+ lo |= (0x0a << 0);
+ _wrmsr(0x80000023, hi, lo);
+ local_irq_restore(flags);
+
+ /* set gpio27 as sci interrupt
+ *
+ * input, pull-up, no-fliter, no-negedge, invert
+ * the sci event is just about 120us
+ */
+ asm(".set noreorder\n");
+ /* input enable */
+ outl(0x00000800, (gpio_base | 0xA0));
+ /* revert the input */
+ outl(0x00000800, (gpio_base | 0xA4));
+ /* event-int enable */
+ outl(0x00000800, (gpio_base | 0xB8));
+ asm(".set reorder\n");
+
+ return 0;
+}
+
+struct irqaction sci_irqaction = {
+ .handler = sci_irq_handler,
+ .name = "sci",
+ .flags = IRQF_SHARED,
+};
+
+static int setup_sci(void)
+{
+ sci_irq_init();
+
+ setup_irq(SCI_IRQ_NUM, &sci_irqaction);
+
+ return 0;
+}
+
+static ssize_t
+ignore_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return count;
+}
+
+static ssize_t
+show_hotkeystate(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d %d\n", event, status);
+}
+
+static DEVICE_ATTR(state, 0444, show_hotkeystate, ignore_store);
+
+static struct attribute *hotkey_attributes[] = {
+ &dev_attr_state.attr,
+ NULL
+};
+
+static struct attribute_group hotkey_attribute_group = {
+ .attrs = hotkey_attributes
+};
+
+static int camera_set(int status)
+{
+ int value;
+ static int camera_status;
+
+ if (status == 2)
+ /* resume the old camera status */
+ camera_set(camera_status);
+ else if (status == 3) {
+ /* revert the camera status */
+ value = ec_read(REG_CAMERA_CONTROL);
+ ec_write(REG_CAMERA_CONTROL, value | (1 << 1));
+ } else { /* status == 0 or status == 1 */
+ status = !!status;
+ camera_status = ec_read(REG_CAMERA_STATUS);
+ if (status != camera_status)
+ camera_set(3);
+ }
+ return ec_read(REG_CAMERA_STATUS);
+}
+
+#define I8042_STATUS_REG 0x64
+#define I8042_DATA_REG 0x60
+#define i8042_read_status() inb(I8042_STATUS_REG)
+#define i8042_read_data() inb(I8042_DATA_REG)
+#define I8042_STR_OBF 0x01
+#define I8042_BUFFER_SIZE 16
+
+static void i8042_flush(void)
+{
+ int i;
+
+ while ((i8042_read_status() & I8042_STR_OBF)
+ && (i < I8042_BUFFER_SIZE)) {
+ udelay(50);
+ i8042_read_data();
+ i++;
+ }
+}
+
+static int yeeloong_hotkey_init(struct device *dev)
+{
+ int ret;
+ struct key_entry *key;
+
+ /* flush the buffer of keyboard */
+ i8042_flush();
+
+ /* setup the system control interface */
+ setup_sci();
+
+ yeeloong_hotkey_dev = input_allocate_device();
+
+ if (!yeeloong_hotkey_dev)
+ return -ENOMEM;
+
+ yeeloong_hotkey_dev->name = "HotKeys";
+ yeeloong_hotkey_dev->phys = "button/input0";
+ yeeloong_hotkey_dev->id.bustype = BUS_HOST;
+ yeeloong_hotkey_dev->dev.parent = dev;
+
+ for (key = yeeloong_keymap; key->type != KE_END; key++) {
+ switch (key->type) {
+ case KE_KEY:
+ set_bit(EV_KEY, yeeloong_hotkey_dev->evbit);
+ set_bit(key->keycode, yeeloong_hotkey_dev->keybit);
+ break;
+ case KE_SW:
+ set_bit(EV_SW, yeeloong_hotkey_dev->evbit);
+ set_bit(key->keycode, yeeloong_hotkey_dev->swbit);
+ break;
+ }
+ }
+
+ ret = input_register_device(yeeloong_hotkey_dev);
+ if (ret) {
+ input_free_device(yeeloong_hotkey_dev);
+ return ret;
+ }
+
+ ret = sysfs_create_group(&yeeloong_hotkey_dev->dev.kobj,
+ &hotkey_attribute_group);
+ if (ret) {
+ sysfs_remove_group(&yeeloong_hotkey_dev->dev.kobj,
+ &hotkey_attribute_group);
+ input_unregister_device(yeeloong_hotkey_dev);
+ yeeloong_hotkey_dev = NULL;
+ }
+ /* update the current status of lid */
+ yeeloong_lid_update_status(BIT_LID_DETECT_ON);
+
+ /* install the real yeeloong_report_lid_status for pm.c */
+ yeeloong_report_lid_status = yeeloong_lid_update_status;
+
+ /* install event handler */
+ yeeloong_install_sci_handler(EVENT_CAMERA, camera_set);
+
+ return 0;
+}
+
+static void yeeloong_hotkey_exit(void)
+{
+ /* free irq */
+ remove_irq(SCI_IRQ_NUM, &sci_irqaction);
+
+ /* uninstall the real yeeloong_report_lid_status for pm.c */
+ yeeloong_report_lid_status = NULL;
+
+ /* uninstall event handler */
+ yeeloong_uninstall_sci_handler(EVENT_CAMERA, camera_set);
+
+ if (yeeloong_hotkey_dev) {
+ sysfs_remove_group(&yeeloong_hotkey_dev->dev.kobj,
+ &hotkey_attribute_group);
+ input_unregister_device(yeeloong_hotkey_dev);
+ yeeloong_hotkey_dev = NULL;
+ }
+}
+
+/* battery subdriver: APM emulated support */
+
+static void get_fixed_battery_info(void)
+{
+ int design_cap, full_charged_cap, design_vol, vendor, cell_count;
+
+ design_cap = (ec_read(REG_BAT_DESIGN_CAP_HIGH) << 8)
+ | ec_read(REG_BAT_DESIGN_CAP_LOW);
+ full_charged_cap = (ec_read(REG_BAT_FULLCHG_CAP_HIGH) << 8)
+ | ec_read(REG_BAT_FULLCHG_CAP_LOW);
+ design_vol = (ec_read(REG_BAT_DESIGN_VOL_HIGH) << 8)
+ | ec_read(REG_BAT_DESIGN_VOL_LOW);
+ vendor = ec_read(REG_BAT_VENDOR);
+ cell_count = ec_read(REG_BAT_CELL_COUNT);
+
+ if (vendor != 0) {
+ printk(KERN_INFO
+ "battery vendor(%s), cells count(%d), "
+ "with designed capacity(%d),designed voltage(%d),"
+ " full charged capacity(%d)\n",
+ (vendor ==
+ FLAG_BAT_VENDOR_SANYO) ? "SANYO" : "SIMPLO",
+ (cell_count == FLAG_BAT_CELL_3S1P) ? 3 : 6,
+ design_cap, design_vol,
+ full_charged_cap);
+ }
+}
+
+#define APM_CRITICAL 5
+
+static void yeeloong_apm_get_power_status(struct apm_power_info *info)
+{
+ unsigned char bat_status;
+
+ info->battery_status = APM_BATTERY_STATUS_UNKNOWN;
+ info->battery_flag = APM_BATTERY_FLAG_UNKNOWN;
+ info->units = APM_UNITS_MINS;
+
+ info->battery_life = (ec_read(REG_BAT_RELATIVE_CAP_HIGH) << 8) |
+ (ec_read(REG_BAT_RELATIVE_CAP_LOW));
+
+ info->ac_line_status = (ec_read(REG_BAT_POWER) & BIT_BAT_POWER_ACIN) ?
+ APM_AC_ONLINE : APM_AC_OFFLINE;
+
+ bat_status = ec_read(REG_BAT_STATUS);
+
+ if (!(bat_status & BIT_BAT_STATUS_IN)) {
+ /* no battery inserted */
+ info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
+ info->battery_flag = APM_BATTERY_FLAG_NOT_PRESENT;
+ info->time = 0x00;
+ return;
+ }
+
+ /* adapter inserted */
+ if (info->ac_line_status == APM_AC_ONLINE) {
+ if (!(bat_status & BIT_BAT_STATUS_FULL)) {
+ /* battery is not fully charged */
+ info->battery_status = APM_BATTERY_STATUS_CHARGING;
+ info->battery_flag = APM_BATTERY_FLAG_CHARGING;
+ } else {
+ /* if the battery is fully charged */
+ info->battery_status = APM_BATTERY_STATUS_HIGH;
+ info->battery_flag = APM_BATTERY_FLAG_HIGH;
+ info->battery_life = 100;
+ }
+ } else {
+ /* battery is too low */
+ if (bat_status & BIT_BAT_STATUS_LOW) {
+ info->battery_status = APM_BATTERY_STATUS_LOW;
+ info->battery_flag = APM_BATTERY_FLAG_LOW;
+ if (info->battery_life <= APM_CRITICAL) {
+ /* we should power off the system now */
+ info->battery_status =
+ APM_BATTERY_STATUS_CRITICAL;
+ info->battery_flag = APM_BATTERY_FLAG_CRITICAL;
+ }
+ } else {
+ /* assume the battery is high enough. */
+ info->battery_status = APM_BATTERY_STATUS_HIGH;
+ info->battery_flag = APM_BATTERY_FLAG_HIGH;
+ }
+ }
+ info->time = ((info->battery_life - 3) * 54 + 142) / 60;
+}
+
+static int yeeloong_apm_init(void)
+{
+ /* print fixed information of battery */
+ get_fixed_battery_info();
+
+ apm_get_power_status = yeeloong_apm_get_power_status;
+
+ return 0;
+}
+
+static void yeeloong_apm_exit(void)
+{
+}
+
+/* platform subdriver */
+static struct platform_device *yeeloong_pdev;
+
+static void __maybe_unused usb_ports_set(int status)
+{
+ status = !!status;
+
+ ec_write(REG_USB0_FLAG, status);
+ ec_write(REG_USB1_FLAG, status);
+ ec_write(REG_USB2_FLAG, status);
+}
+
+static int __maybe_unused yeeloong_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ printk(KERN_INFO "yeeloong specific suspend\n");
+
+ /* close LCD */
+ lcd_vo_set(BIT_DISPLAY_LCD_OFF);
+ /* close CRT */
+ crt_vo_set(BIT_CRT_DETECT_UNPLUG);
+ /* power off camera */
+ camera_set(BIT_CAMERA_CONTROL_OFF);
+ /* poweroff three usb ports */
+ usb_ports_set(BIT_USB_FLAG_OFF);
+ /* minimize the speed of FAN */
+ set_fan_pwm_enable(BIT_FAN_MANUAL);
+ set_fan_pwm(1);
+
+ return 0;
+}
+
+static int __maybe_unused yeeloong_resume(struct platform_device *pdev)
+{
+ printk(KERN_INFO "yeeloong specific resume\n");
+
+ /* resume the status of lcd & crt */
+ lcd_vo_set(BIT_DISPLAY_LCD_ON);
+ crt_vo_set(BIT_CRT_DETECT_PLUG);
+
+ /* power on three usb ports */
+ usb_ports_set(BIT_USB_FLAG_ON);
+
+ /* resume the camera status */
+ camera_set(2);
+
+ /* resume fan to auto mode */
+ set_fan_pwm_enable(BIT_FAN_AUTO);
+
+ return 0;
+}
+
+static struct platform_driver platform_driver = {
+ .driver = {
+ .name = "yeeloong-laptop",
+ .owner = THIS_MODULE,
+ },
+#ifdef CONFIG_PM
+ .suspend = yeeloong_suspend,
+ .resume = yeeloong_resume,
+#endif
+};
+
+static ssize_t yeeloong_pdev_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "yeeloong laptop\n");
+}
+
+static struct device_attribute dev_attr_yeeloong_pdev_name =
+__ATTR(name, S_IRUGO, yeeloong_pdev_name_show, NULL);
+
+static int yeeloong_pdev_init(void)
+{
+ int ret;
+
+ /* Register platform stuff */
+ ret = platform_driver_register(&platform_driver);
+ if (ret)
+ return ret;
+
+ yeeloong_pdev = platform_device_alloc("yeeloong-laptop", -1);
+ if (!yeeloong_pdev) {
+ ret = -ENOMEM;
+ platform_driver_unregister(&platform_driver);
+ return ret;
+ }
+
+ ret = platform_device_add(yeeloong_pdev);
+ if (ret) {
+ platform_device_put(yeeloong_pdev);
+ return ret;
+ }
+
+ if (IS_ERR(yeeloong_pdev)) {
+ ret = PTR_ERR(yeeloong_pdev);
+ yeeloong_pdev = NULL;
+ printk(KERN_INFO "unable to register platform device\n");
+ return ret;
+ }
+
+ ret = device_create_file(&yeeloong_pdev->dev,
+ &dev_attr_yeeloong_pdev_name);
+ if (ret) {
+ printk(KERN_INFO "unable to create sysfs device attributes\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void yeeloong_pdev_exit(void)
+{
+ if (yeeloong_pdev) {
+ platform_device_unregister(yeeloong_pdev);
+ yeeloong_pdev = NULL;
+ platform_driver_unregister(&platform_driver);
+ }
+}
+
+static int __init yeeloong_init(void)
+{
+ int ret;
+
+ if (mips_machtype != MACH_LEMOTE_YL2F89) {
+ printk(KERN_INFO "This Driver is for YeeLoong netbook, You"
+ "can not use it on the other Machines\n");
+ return -EFAULT;
+ }
+
+ printk(KERN_INFO "YeeLoong Platform Specific Drivers %s loaded\n",
+ DRIVER_VERSION);
+
+ ret = yeeloong_pdev_init();
+ if (ret) {
+ yeeloong_pdev_exit();
+ printk(KERN_INFO "init yeeloong platform driver failure\n");
+ return ret;
+ }
+ ret = yeeloong_hotkey_init(&yeeloong_pdev->dev);
+ if (ret) {
+ yeeloong_hotkey_exit();
+ printk(KERN_INFO "init yeeloong hotkey driver failure\n");
+ return ret;
+ }
+ ret = yeeloong_apm_init();
+ if (ret) {
+ yeeloong_apm_exit();
+ printk(KERN_INFO "init yeeloong apm driver failure\n");
+ return ret;
+ }
+ ret = yeeloong_backlight_init(&yeeloong_pdev->dev);
+ if (ret) {
+ yeeloong_backlight_exit();
+ printk(KERN_INFO "init yeeloong backlight driver failure\n");
+ return ret;
+ }
+ ret = yeeloong_thermal_init(&yeeloong_backlight_dev->dev);
+ if (ret) {
+ yeeloong_thermal_exit(&yeeloong_backlight_dev->dev);
+ printk(KERN_INFO
+ "Fail to init yeeloong thermal cooling device.\n");
+ return ret;
+ }
+ ret = yeeloong_hwmon_init(&yeeloong_pdev->dev);
+ if (ret) {
+ yeeloong_hwmon_exit();
+ printk(KERN_INFO "init yeeloong hwmon driver failure\n");
+ return ret;
+ }
+ ret = yeeloong_vo_init(&yeeloong_pdev->dev);
+ if (ret) {
+ yeeloong_vo_exit();
+ printk(KERN_INFO "init yeeloong video output driver failure\n");
+ return ret;
+ }
+ return 0;
+}
+
+static void __exit yeeloong_exit(void)
+{
+ yeeloong_vo_exit();
+ yeeloong_hwmon_exit();
+ yeeloong_thermal_exit(&yeeloong_backlight_dev->dev);
+ yeeloong_backlight_exit();
+ yeeloong_apm_exit();
+ yeeloong_hotkey_exit();
+ yeeloong_pdev_exit();
+
+ printk(KERN_INFO "YeeLoong Platform Specific Drivers %s unloaded\n",
+ DRIVER_VERSION);
+}
+
+module_init(yeeloong_init);
+module_exit(yeeloong_exit);
+
+MODULE_AUTHOR("Wu Zhangjin <wuzj@xxxxxxxxxx>");
+MODULE_DESCRIPTION("YeeLoong laptop driver");
+MODULE_LICENSE("GPL");
--
1.6.2.1
