fuloong(2f) has an AMD CS5536 south bridge. we need to add support for
it.
there are several modules provided by cs5536, currently, only these modules are
used in fuloong(2f) mini PC: ide, acc(audio), ohci, isa, and ehci.
since the PCI operations are similiar between fuloong(2e) and
fuloong(2f),yeeloong(2f) and even similiar to gdium, herein, I just rename
ops-fuloong2e.c to ops-loongsgon2.c to share most of the source code.
and also, the serial port support is enabled via adding a macro in
machine.h.
Signed-off-by: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
---
arch/mips/Makefile | 1 +
arch/mips/include/asm/mach-loongson/machine.h | 8 +-
arch/mips/loongson/Kconfig | 30 ++++
arch/mips/loongson/Makefile | 6 +
arch/mips/loongson/fuloong-2f/Makefile | 5 +
arch/mips/loongson/fuloong-2f/irq.c | 114 ++++++++++++++
arch/mips/loongson/fuloong-2f/reset.c | 68 ++++++++
arch/mips/pci/Makefile | 3 +-
arch/mips/pci/fixup-fuloong2f.c | 171 ++++++++++++++++++++
arch/mips/pci/ops-fuloong2e.c | 154 ------------------
arch/mips/pci/ops-loongson2.c | 207 +++++++++++++++++++++++++
11 files changed, 611 insertions(+), 156 deletions(-)
create mode 100644 arch/mips/loongson/fuloong-2f/Makefile
create mode 100644 arch/mips/loongson/fuloong-2f/irq.c
create mode 100644 arch/mips/loongson/fuloong-2f/reset.c
create mode 100644 arch/mips/pci/fixup-fuloong2f.c
delete mode 100644 arch/mips/pci/ops-fuloong2e.c
create mode 100644 arch/mips/pci/ops-loongson2.c
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 47ecded..65d4734 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -327,6 +327,7 @@ core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
-mno-branch-likely
load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
+load-$(CONFIG_LEMOTE_FULOONG2F) +=0xffffffff80200000
#
# MIPS Malta board
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
index ea5954c..2eb9be6 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin <wuzj@xxxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify it
@@ -17,6 +17,12 @@
#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E
+#elif defined(CONFIG_LEMOTE_FULOONG2F)
+
+#define LOONGSON_UART_BASE (LOONGSON_PCIIO_BASE + 0x2f8)
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F
+
#endif
#endif /* __ASM_MACH_LOONGSON_MACHINE_H */
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index b03d773..8156d71 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -28,6 +28,36 @@ config LEMOTE_FULOONG2E
an FPGA northbridge
Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+
+config LEMOTE_FULOONG2F
+ bool "Lemote Fuloong(2f) mini-PC"
+ select ARCH_SPARSEMEM_ENABLE
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYS_HAS_CPU_LOONGSON2F
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select BOARD_SCACHE
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_EARLY_PRINTK
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select CPU_HAS_WB
+ select CS5536
+ help
+ Lemote Fuloong(2f) mini-PC board based on the Chinese Loongson-2F
+ CPU, which has an internal DDR and PCIX controller. the PCIX
+ controller have the similiar programming interface of the FPGA north
+ bridge of LOONGSON2E.
+
+ Lemote Fuloong(2f) mini PC have an AMD CS5536 south bridge.
endchoice
config CS5536
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
index 39048c4..635062b 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson/Makefile
@@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON) += common/
#
obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/
+
+#
+# Lemote Fuloong mini-PC (Loongson 2F-based)
+#
+
+obj-$(CONFIG_LEMOTE_FULOONG2F) += fuloong-2f/
diff --git a/arch/mips/loongson/fuloong-2f/Makefile b/arch/mips/loongson/fuloong-2f/Makefile
new file mode 100644
index 0000000..010b86c
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2f/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for fuloong-2f
+#
+
+obj-y += irq.o reset.o
diff --git a/arch/mips/loongson/fuloong-2f/irq.c b/arch/mips/loongson/fuloong-2f/irq.c
new file mode 100644
index 0000000..22c45fd
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2f/irq.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2007 Lemote Inc.
+ * Author: Fuxin Zhang, zhangfx@xxxxxxxxxx
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
+#define LOONGSON_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
+#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */
+#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
+#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */
+
+#define LOONGSON_INT_BIT_INT0 (1 << 11)
+#define LOONGSON_INT_BIT_INT1 (1 << 12)
+
+static int mach_i8259_irq(void)
+{
+ int irq, isr, imr;
+
+ irq = -1;
+
+ if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
+ imr = inb(0x21) | (inb(0xa1) << 8);
+ isr = inb(0x20) | (inb(0xa0) << 8);
+ isr &= ~0x4; /* irq2 for cascade */
+ isr &= ~imr;
+ irq = ffs(isr) - 1;
+ }
+
+ return irq;
+}
+
+static void i8259_irqdispatch(void)
+{
+ int irq;
+
+ irq = mach_i8259_irq();
+ if (irq >= 0)
+ do_IRQ(irq);
+ else
+ spurious_interrupt();
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+ if (pending & CAUSEF_IP7)
+ do_IRQ(LOONGSON_TIMER_IRQ);
+ else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
+#ifdef CONFIG_OPROFILE
+ do_IRQ(LOONGSON2_PERFCNT_IRQ);
+#endif
+ bonito_irqdispatch();
+ } else if (pending & CAUSEF_IP3) /* CPU UART */
+ do_IRQ(LOONGSON_UART_IRQ);
+ else if (pending & CAUSEF_IP2) /* South Bridge */
+ i8259_irqdispatch();
+ else
+ spurious_interrupt();
+}
+
+void __init set_irq_trigger_mode(void)
+{
+ /* setup cs5536 as high level trigger */
+ LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
+ LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
+}
+
+static irqreturn_t ip6_action(int cpl, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+struct irqaction ip6_irqaction = {
+ .handler = ip6_action,
+ .name = "cascade",
+ .flags = IRQF_SHARED,
+};
+
+struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+void __init mach_init_irq(void)
+{
+ /* init all controller
+ * 0-15 ------> i8259 interrupt
+ * 16-23 ------> mips cpu interrupt
+ * 32-63 ------> bonito irq
+ */
+
+ /* Sets the first-level interrupt dispatcher. */
+ mips_cpu_irq_init();
+ init_i8259_irqs();
+ bonito_irq_init();
+
+ /* setup north bridge irq (bonito) */
+ setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
+ /* setup source bridge irq (i8259) */
+ setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
+}
diff --git a/arch/mips/loongson/fuloong-2f/reset.c b/arch/mips/loongson/fuloong-2f/reset.c
new file mode 100644
index 0000000..ac52f10
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2f/reset.c
@@ -0,0 +1,68 @@
+/* Board-specific reboot/shutdown routines
+ *
+ * Copyright (c) 2009 Philippe Vachon <philippe@xxxxxxxxx>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzj@xxxxxxxxxx
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <loongson.h>
+
+/* cs5536 is the south bridge used by fuloong2f mini PC */
+#include <cs5536/cs5536.h>
+
+void mach_prepare_reboot(void)
+{
+ /*
+ * reset cpu to full speed, this is needed when enabling cpu frequency
+ * scalling
+ */
+ LOONGSON_CHIPCFG0 |= 0x7;
+
+ /* send a reset signal to south bridge.
+ *
+ * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset
+ * normally with this reset operation and it will not work in PMON, but
+ * you can type halt command and then reboot, seems the hardware reset
+ * logic not work normally.
+ */
+ {
+ u32 hi, lo;
+ _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo);
+ lo |= 0x00000001;
+ _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo);
+ }
+ /* the reset signal need about 8ms(?) to function */
+ udelay(8000);
+}
+
+void mach_prepare_shutdown(void)
+{
+ u32 hi, lo, val;
+ int gpio_base;
+
+ /* get gpio base */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo);
+ gpio_base = lo & 0xff00;
+
+ /* make cs5536 gpio13 output enable */
+ val = inl(gpio_base + GPIOL_OUT_EN);
+ val &= ~(1 << (16 + 13));
+ val |= (1 << 13);
+ outl(val, gpio_base + GPIOL_OUT_EN);
+ mmiowb();
+ /* make cs5536 gpio13 output low level voltage. */
+ val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13));
+ val |= (1 << (16 + 13));
+ outl(val, gpio_base + GPIOL_OUT_VAL);
+ mmiowb();
+}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 0610c86..e7ad00b 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -28,7 +28,8 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
-obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-fuloong2e.o
+obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
+obj-$(CONFIG_LEMOTE_FULOONG2F) += fixup-fuloong2f.o ops-loongson2.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
diff --git a/arch/mips/pci/fixup-fuloong2f.c b/arch/mips/pci/fixup-fuloong2f.c
new file mode 100644
index 0000000..994f668
--- /dev/null
+++ b/arch/mips/pci/fixup-fuloong2f.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2008 Lemote Technology
+ * Copyright (C) 2004 ICT CAS
+ * Author: Li xiaoyu, lixy@xxxxxxxxx
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author: Fuxin Zhang, zhangfx@xxxxxxxxxx
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <loongson.h>
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/* PCI interrupt pins
+ *
+ * These should not be changed, or you should consider loongson2f interrupt
+ * register and your pci card dispatch
+ */
+
+#define PCIA 4
+#define PCIB 5
+#define PCIC 6
+#define PCID 7
+
+/* all the pci device has the PCIA pin, check the datasheet. */
+static char irq_tab[][5] __initdata = {
+ /* INTA INTB INTC INTD */
+ {0, 0, 0, 0, 0}, /* 11: Unused */
+ {0, 0, 0, 0, 0}, /* 12: Unused */
+ {0, 0, 0, 0, 0}, /* 13: Unused */
+ {0, 0, 0, 0, 0}, /* 14: Unused */
+ {0, 0, 0, 0, 0}, /* 15: Unused */
+ {0, 0, 0, 0, 0}, /* 16: Unused */
+ {0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */
+ {0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */
+ {0, PCIC, 0, 0, 0}, /* 19: SiI3114 */
+ {0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */
+ {0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */
+ {0, 0, 0, 0, 0}, /* 22: Unused */
+ {0, 0, 0, 0, 0}, /* 23: Unused */
+ {0, 0, 0, 0, 0}, /* 24: Unused */
+ {0, 0, 0, 0, 0}, /* 25: Unused */
+ {0, 0, 0, 0, 0}, /* 26: Unused */
+ {0, 0, 0, 0, 0}, /* 27: Unused */
+};
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int virq;
+
+ if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536)
+ && (PCI_SLOT(dev->devfn) < 32)) {
+ virq = irq_tab[slot][pin];
+ printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin,
+ virq + LOONGSON_IRQ_BASE);
+ if (virq != 0)
+ return LOONGSON_IRQ_BASE + virq;
+ else
+ return 0;
+ } else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */
+ switch (PCI_FUNC(dev->devfn)) {
+ case 2:
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ CS5536_IDE_INTR);
+ return CS5536_IDE_INTR; /* for IDE */
+ case 3:
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ CS5536_ACC_INTR);
+ return CS5536_ACC_INTR; /* for AUDIO */
+ case 4: /* for OHCI */
+ case 5: /* for EHCI */
+ case 6: /* for UDC */
+ case 7: /* for OTG */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ CS5536_USB_INTR);
+ return CS5536_USB_INTR;
+ }
+ return dev->irq;
+ } else {
+ printk(KERN_INFO " strange pci slot number.\n");
+ return 0;
+ }
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/* CS5536 SPEC. fixup */
+static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+{
+ /* the uart1 and uart2 interrupt in PIC is enabled as default */
+ pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
+ pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
+ return;
+}
+
+static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+{
+ /* setting the mutex pin as IDE function */
+ pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
+ CS5536_IDE_FLASH_SIGNATURE);
+ return;
+}
+
+static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+{
+ u8 val;
+
+ /* enable the AUDIO interrupt in PIC */
+ pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
+
+#if 1
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &val);
+ printk(KERN_INFO "cs5536 acc latency 0x%x\n", val);
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
+#endif
+ return;
+}
+
+static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+{
+ /* enable the OHCI interrupt in PIC */
+ /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
+ pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
+ return;
+}
+
+static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+{
+ u32 hi, lo;
+
+ /* Serial short detect enable */
+ _rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo);
+ _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo);
+
+ /* setting the USB2.0 micro frame length */
+ pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
+ return;
+}
+
+static void __init loongson_nec_fixup(struct pci_dev *pdev)
+{
+ unsigned int val;
+
+ pci_read_config_dword(pdev, 0xe0, &val);
+ /* Only 2 port be used */
+ pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
+ loongson_cs5536_isa_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC,
+ loongson_cs5536_ohci_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC,
+ loongson_cs5536_ehci_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
+ loongson_cs5536_acc_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE,
+ loongson_cs5536_ide_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+ loongson_nec_fixup);
diff --git a/arch/mips/pci/ops-fuloong2e.c b/arch/mips/pci/ops-fuloong2e.c
deleted file mode 100644
index 171f65c..0000000
--- a/arch/mips/pci/ops-fuloong2e.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * fuloong2e specific PCI support.
- *
- * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
- * All rights reserved.
- * Authors: Carsten Langgaard <carstenl@xxxxxxxx>
- * Maciej W. Rozycki <macro@xxxxxxxx>
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzj@xxxxxxxxxx>
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <loongson.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#define CFG_SPACE_REG(offset) \
- (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset))
-#define ID_SEL_BEGIN 11
-#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
-
-
-static int loongson_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus,
- unsigned int devfn, int where,
- u32 *data)
-{
- u32 busnum = bus->number;
- u32 addr, type;
- u32 dummy;
- void *addrp;
- int device = PCI_SLOT(devfn);
- int function = PCI_FUNC(devfn);
- int reg = where & ~3;
-
- if (busnum == 0) {
- /* Type 0 configuration for onboard PCI bus */
- if (device > MAX_DEV_NUM)
- return -1;
-
- addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
- type = 0;
- } else {
- /* Type 1 configuration for offboard PCI bus */
- addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
- type = 0x10000;
- }
-
- /* Clear aborts */
- LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \
- LOONGSON_PCICMD_MTABORT_CLR;
-
- LOONGSON_PCIMAP_CFG = (addr >> 16) | type;
-
- /* Flush Bonito register block */
- dummy = LOONGSON_PCIMAP_CFG;
- mmiowb();
-
- addrp = CFG_SPACE_REG(addr & 0xffff);
- if (access_type == PCI_ACCESS_WRITE)
- writel(cpu_to_le32(*data), addrp);
- else
- *data = le32_to_cpu(readl(addrp));
-
- /* Detect Master/Target abort */
- if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR |
- LOONGSON_PCICMD_MTABORT_CLR)) {
- /* Error occurred */
-
- /* Clear bits */
- LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR |
- LOONGSON_PCICMD_MTABORT_CLR);
-
- return -1;
- }
-
- return 0;
-
-}
-
-
-/*
- * We can't address 8 and 16 bit words directly. Instead we have to
- * read/write a 32bit word and mask/modify the data we actually want.
- */
-static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data = 0;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data))
- return -1;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if (size == 4)
- data = val;
- else {
- if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data))
- return -1;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- }
-
- if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
- &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops loongson_pci_ops = {
- .read = loongson_pcibios_read,
- .write = loongson_pcibios_write
-};
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
new file mode 100644
index 0000000..7352142
--- /dev/null
+++ b/arch/mips/pci/ops-loongson2.c
@@ -0,0 +1,207 @@
+/*
+ * fuloong2e specific PCI support.
+ *
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@xxxxxxxx>
+ * Maciej W. Rozycki <macro@xxxxxxxx>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@xxxxxxxxxx>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_CS5536
+#include <cs5536/cs5536_pci.h>
+#include <cs5536/cs5536.h>
+#endif
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+#define CFG_SPACE_REG(offset) \
+ (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset))
+#define ID_SEL_BEGIN 11
+#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
+
+
+static int loongson_pcibios_config_access(unsigned char access_type,
+ struct pci_bus *bus,
+ unsigned int devfn, int where,
+ u32 *data)
+{
+ u32 busnum = bus->number;
+ u32 addr, type;
+ u32 dummy;
+ void *addrp;
+ int device = PCI_SLOT(devfn);
+ int function = PCI_FUNC(devfn);
+ int reg = where & ~3;
+
+ if (busnum == 0) {
+ /* board-specific part,currently,only fuloong2f,yeeloong2f
+ * use CS5536, fuloong2e use via686b, gdium has no
+ * south bridge
+ */
+#ifdef CONFIG_CS5536
+ /* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr()
+ * to access the regsters 0xf4,0xf8,0xfc, which is bigger than
+ * 0xf0, so, it will not go this branch, but the others. so,
+ * no calling dead loop here.
+ */
+ if ((PCI_IDSEL_CS5536 == device) && (reg < 0xF0)) {
+ switch (access_type) {
+ case PCI_ACCESS_READ:
+ *data = cs5536_pci_conf_read4(function, reg);
+ break;
+ case PCI_ACCESS_WRITE:
+ cs5536_pci_conf_write4(function, reg, *data);
+ break;
+ }
+ return 0;
+ }
+#endif
+ /* Type 0 configuration for onboard PCI bus */
+ if (device > MAX_DEV_NUM)
+ return -1;
+
+ addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
+ type = 0;
+ } else {
+ /* Type 1 configuration for offboard PCI bus */
+ addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+ type = 0x10000;
+ }
+
+ /* Clear aborts */
+ LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \
+ LOONGSON_PCICMD_MTABORT_CLR;
+
+ LOONGSON_PCIMAP_CFG = (addr >> 16) | type;
+
+ /* Flush Bonito register block */
+ dummy = LOONGSON_PCIMAP_CFG;
+ mmiowb();
+
+ addrp = CFG_SPACE_REG(addr & 0xffff);
+ if (access_type == PCI_ACCESS_WRITE)
+ writel(cpu_to_le32(*data), addrp);
+ else
+ *data = le32_to_cpu(readl(addrp));
+
+ /* Detect Master/Target abort */
+ if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR |
+ LOONGSON_PCICMD_MTABORT_CLR)) {
+ /* Error occurred */
+
+ /* Clear bits */
+ LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR |
+ LOONGSON_PCICMD_MTABORT_CLR);
+
+ return -1;
+ }
+
+ return 0;
+
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
+ &data))
+ return -1;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (size == 4)
+ data = val;
+ else {
+ if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+ where, &data))
+ return -1;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ }
+
+ if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
+ &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops loongson_pci_ops = {
+ .read = loongson_pcibios_read,
+ .write = loongson_pcibios_write
+};
+
+#ifdef CONFIG_CS5536
+void _rdmsr(u32 msr, u32 *hi, u32 *lo)
+{
+ struct pci_bus bus = {
+ .number = PCI_BUS_CS5536
+ };
+ u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+ loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+ loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_rdmsr);
+
+void _wrmsr(u32 msr, u32 hi, u32 lo)
+{
+ struct pci_bus bus = {
+ .number = PCI_BUS_CS5536
+ };
+ u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_wrmsr);
+#endif
--
1.6.2.1
