Hello. Manuel Lauss wrote:
UART autodetection breaks on the Au1300 but the IP blocks are identical, at least in the datasheets.
Pass uart type on to the 8250 driver via platform data, and move the MSR quirk to another place sind autoconf() is now no longer
s/sind autoconf/since autoconfig/
called on init.
Signed-off-by: Manuel Lauss <manuel.lauss@xxxxxxxxx> --- Tested on DB1200 and DB1300. The mips parts apply on top of Ralf's mips-queue tree. arch/mips/alchemy/common/platform.c | 4 +++- drivers/serial/8250.c | 13 +++++++------ 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 195e5b3..3be14b0 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -26,7 +26,9 @@ .irq = _irq, \ .regshift = 2, \ .iotype = UPIO_AU, \ - .flags = UPF_SKIP_TEST | UPF_IOREMAP \ + .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ + UPF_FIXED_TYPE, \
Good to know this has been implemented. WBR, Sergei
