This patch will help to generate smaller kernel images for linux-MIPS,
Here is the effect when using lzma:
$ ls -sh vmlinux
7.1M vmlinux
$ ls -sh arch/mips/boot/compressed/vmlinuz
1.5M arch/mips/boot/compressed/vmlinuz
Have tested the 32bit kernel on Qemu/Malta and 64bit kernel on FuLoong
Mini PC. both of them work well.
and this revision incorporates the feedback from Alexander Clouter
<alex@xxxxxxxxxxxxx>, he helped to test it on AR7[1] based Linksys
WAG54Gv2 and gave good suggestion on board-independence.
NOTE: this should work for the other MIPS-based machines, but I have
used the command bc in the Makefile to calculate the load address of the
compressed kernel. I'm not sure this is suitable. perhaps I need to
rewrite this part in C program or somebody help to simplify the current
implementation.
Signed-off-by: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
---
arch/mips/Kconfig | 3 +
arch/mips/Makefile | 11 ++-
arch/mips/boot/compressed/Makefile | 72 +++++++++++++++
arch/mips/boot/compressed/dbg.c | 64 ++++++++++++++
arch/mips/boot/compressed/dbg.h | 19 ++++
arch/mips/boot/compressed/decompress.c | 149 +++++++++++++++++++++++++++++++
arch/mips/boot/compressed/dummy.c | 4 +
arch/mips/boot/compressed/head.S | 86 ++++++++++++++++++
arch/mips/boot/compressed/ld.script | 150 ++++++++++++++++++++++++++++++++
9 files changed, 556 insertions(+), 2 deletions(-)
create mode 100644 arch/mips/boot/compressed/Makefile
create mode 100644 arch/mips/boot/compressed/dbg.c
create mode 100644 arch/mips/boot/compressed/dbg.h
create mode 100644 arch/mips/boot/compressed/decompress.c
create mode 100644 arch/mips/boot/compressed/dummy.c
create mode 100644 arch/mips/boot/compressed/head.S
create mode 100644 arch/mips/boot/compressed/ld.script
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3ca0fe1..fae7029 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -4,6 +4,9 @@ config MIPS
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_LZMA
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
select RTC_LIB
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 861da51..300b996 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -709,7 +709,10 @@ vmlinux.64: vmlinux
makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
-all: $(all-y)
+all: $(all-y) zImage
+
+zImage: vmlinux
+ $(Q)$(MAKE) $(build)=arch/mips/boot/compressed $@ LOADADDR=$(load-y)
vmlinux.bin: $(vmlinux-32)
+@$(call makeboot,$@)
@@ -735,11 +738,13 @@ endif
install:
$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+ $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
archclean:
@$(MAKE) $(clean)=arch/mips/boot
+ @$(MAKE) $(clean)=arch/mips/boot/compressed
@$(MAKE) $(clean)=arch/mips/lasat
define archhelp
@@ -747,10 +752,12 @@ define archhelp
echo ' vmlinux.ecoff - ECOFF boot image'
echo ' vmlinux.bin - Raw binary boot image'
echo ' vmlinux.srec - SREC boot image'
+ echo ' vmlinuz - Compressed boot image'
echo
echo ' These will be default as apropriate for a configured platform.'
endef
CLEAN_FILES += vmlinux.32 \
vmlinux.64 \
- vmlinux.ecoff
+ vmlinux.ecoff \
+ vmlinuz
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
new file mode 100644
index 0000000..f9ccd97
--- /dev/null
+++ b/arch/mips/boot/compressed/Makefile
@@ -0,0 +1,72 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.
+#
+# Adapted for MIPS Pete Popov, Dan Malek
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Adapted for PowerPC by Gary Thomas
+# modified by Cort (cort@xxxxxxxxxx)
+#
+# Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+# Author: Wu Zhangjin <wuzj@xxxxxxxxxx>
+#
+
+# The load address of the compressed kernel, VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
+VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1)
+VMLINUX_SIZE := $(shell echo "obase=16;ibase=10;(($(VMLINUX_SIZE)/65536 + 1) * 65536)" | bc | cut -d'.' -f1)
+VMLINUX_LOAD_ADDRESS = $(shell echo $(LOADADDR) | sed -e "s/0xffffffff//g")
+VMLINUZ_LOAD_ADDRESS := $(shell echo "obase=16; ibase=16; ($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE))" | bc)
+VMLINUZ_LOAD_ADDRESS := 0x$(if $(CONFIG_64BIT),ffffffff,)$(VMLINUZ_LOAD_ADDRESS)
+LOADADDR := 0x$(if $(CONFIG_64BIT),ffffffff,)$(VMLINUX_LOAD_ADDRESS)
+
+# set the default size of the mallocing area for decompressing
+BOOT_HEAP_SIZE := 0x400000
+
+KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
+ -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"LOADADDR=$(LOADADDR)ull" \
+
+# uncomment the -DDEBUG to enable serial port debugging for your machine
+# and please ensure there is a suitable serial port address defined in dbg.h
+KBUILD_CFLAGS += #-DDEBUG
+
+KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
+ -DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \
+ -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE)
+
+OBJECTS := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
+
+OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
+$(obj)/vmlinux.bin: $(KBUILD_IMAGE)
+ $(call if_changed,objcopy)
+
+suffix_$(CONFIG_KERNEL_GZIP) = gz
+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
+tool_$(CONFIG_KERNEL_GZIP) = gzip
+tool_$(CONFIG_KERNEL_BZIP2) = bzip2
+tool_$(CONFIG_KERNEL_LZMA) = lzma
+$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin
+ $(call if_changed,$(tool_y))
+ $(Q)rm -f $<
+
+$(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o
+ $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) \
+ --add-section=.image=$< \
+ --set-section-flags=.image=contents,alloc,load,readonly,data \
+ $(obj)/dummy.o $@
+ $(Q)rm -f $<
+
+LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T
+$(obj)/vmlinuz: $(src)/ld.script $(OBJECTS) $(obj)/piggy.o
+ $(call if_changed,ld)
+ $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@
+ $(Q)rm -f $(obj)/piggy.o
+
+zImage: $(obj)/vmlinuz
+ $(Q)ln -sf $< $(objtree)/vmlinuz
+ $(Q)echo " SYMLINK $(objtree)/vmlinuz"
+
+clean:
+clean-files += *.o \
+ vmlinu*
diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c
new file mode 100644
index 0000000..04db05f
--- /dev/null
+++ b/arch/mips/boot/compressed/dbg.c
@@ -0,0 +1,64 @@
+/*
+ * MIPS-specific debug support for pre-boot environment
+ */
+
+#ifdef DEBUG
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <linux/init.h>
+
+#include "dbg.h"
+
+static inline unsigned int serial_in(int offset)
+{
+ return *((char *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+ *((char *)PORT(offset)) = value;
+}
+
+int putc(char c)
+{
+ while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
+ ;
+
+ serial_out(UART_TX, c);
+
+ return 1;
+}
+
+void puts(const char *s)
+{
+ char c;
+ while ((c = *s++) != '\0') {
+ putc(c);
+ if (c == '\n')
+ putc('\r');
+ }
+}
+
+void puthex(unsigned long long val)
+{
+
+ unsigned char buf[10];
+ int i;
+ for (i = 7; i >= 0; i--) {
+ buf[i] = "0123456789ABCDEF"[val & 0x0F];
+ val >>= 4;
+ }
+ buf[8] = '\0';
+ puts(buf);
+}
+
+
+#else
+void puts(const char *s)
+{
+}
+void puthex(unsigned long long val)
+{
+}
+#endif
diff --git a/arch/mips/boot/compressed/dbg.h b/arch/mips/boot/compressed/dbg.h
new file mode 100644
index 0000000..ee5f1fd
--- /dev/null
+++ b/arch/mips/boot/compressed/dbg.h
@@ -0,0 +1,19 @@
+/*
+ * board-specific serial port
+ */
+
+#include <asm/addrspace.h>
+
+#ifdef CONFIG_LEMOTE_FULONG
+#define UART_BASE 0x1fd003f8
+#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))
+#endif
+
+#ifdef CONFIG_AR7
+#include <ar7.h>
+#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
+#endif
+
+#ifndef PORT
+#error please define the serial port address for your own machine
+#endif
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
new file mode 100644
index 0000000..2283e61
--- /dev/null
+++ b/arch/mips/boot/compressed/decompress.c
@@ -0,0 +1,149 @@
+/*
+ * Misc. bootloader code for many machines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Matt Porter <mporter@xxxxxxxxxx> Derived from
+ * arch/ppc/boot/prep/misc.c
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/addrspace.h>
+
+/* These two variables specify the free mem region
+ * that can be used for temporary malloc area
+ */
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
+char *zimage_start;
+
+/* The linker tells us where the image is. */
+extern unsigned char __image_begin, __image_end;
+extern unsigned char __ramdisk_begin, __ramdisk_end;
+unsigned long initrd_size;
+
+/* debug interfaces */
+extern void puts(const char *s);
+extern void puthex(unsigned long long val);
+
+void error(char *x)
+{
+ puts("\n\n");
+ puts(x);
+ puts("\n\n -- System halted");
+
+ while (1)
+ ; /* Halt */
+}
+
+/* activate the code for pre-boot environment */
+#define STATIC static
+
+#ifdef CONFIG_KERNEL_GZIP
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ int i;
+ const char *s = src;
+ char *d = dest;
+
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ return dest;
+}
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+void *memset(void *s, int c, size_t n)
+{
+ int i;
+ char *ss = s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return s;
+}
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+void decompress_kernel(unsigned long load_addr, int num_words,
+ unsigned long cksum, unsigned long boot_heap_start)
+{
+ extern unsigned long start;
+ int zimage_size;
+
+ initrd_size = (unsigned long)(&__ramdisk_end) -
+ (unsigned long)(&__ramdisk_begin);
+
+ /*
+ * Reveal where we were loaded at and where we
+ * were relocated to.
+ */
+ puts("loaded at: ");
+ puthex(load_addr);
+ puts(" ");
+ puthex((unsigned long)(load_addr + (4 * num_words)));
+ puts("\n");
+ if ((unsigned long)load_addr != (unsigned long)&start) {
+ puts("relocated to: ");
+ puthex((unsigned long)&start);
+ puts(" ");
+ puthex((unsigned long)((unsigned long)&start +
+ (4 * num_words)));
+ puts("\n");
+ }
+
+ /*
+ * We link ourself to an arbitrary low address. When we run, we
+ * relocate outself to that address. __image_beign points to
+ * the part of the image where the zImage is. -- Tom
+ */
+ zimage_start = (char *)(unsigned long)(&__image_begin);
+ zimage_size = (unsigned long)(&__image_end) -
+ (unsigned long)(&__image_begin);
+
+ /*
+ * The zImage and initrd will be between start and _end, so they've
+ * already been moved once. We're good to go now. -- Tom
+ */
+ puts("zimage at: ");
+ puthex((unsigned long)zimage_start);
+ puts(" ");
+ puthex((unsigned long)(zimage_size + zimage_start));
+ puts("\n");
+
+ if (initrd_size) {
+ puts("initrd at: ");
+ puthex((unsigned long)(&__ramdisk_begin));
+ puts(" ");
+ puthex((unsigned long)(&__ramdisk_end));
+ puts("\n");
+ }
+
+ /* this area are prepared for mallocing when decompressing */
+ free_mem_ptr = boot_heap_start;
+ free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;
+
+ /* Display standard Linux/MIPS boot prompt for kernel args */
+ puts("Uncompressing Linux at load address ");
+ puthex(LOADADDR);
+ puts("\n");
+ /* Decompress the kernel with according algorithm */
+ decompress(zimage_start, zimage_size, 0, 0,
+ (void *)LOADADDR, 0, error);
+ /* FIXME: is there a need to flush cache here? */
+ puts("Now, booting the kernel...\n");
+}
diff --git a/arch/mips/boot/compressed/dummy.c b/arch/mips/boot/compressed/dummy.c
new file mode 100644
index 0000000..31dbf45
--- /dev/null
+++ b/arch/mips/boot/compressed/dummy.c
@@ -0,0 +1,4 @@
+int main(void)
+{
+ return 0;
+}
diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S
new file mode 100644
index 0000000..f4c29fc
--- /dev/null
+++ b/arch/mips/boot/compressed/head.S
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf Electronics
+ * Written by Ralf Baechle and Andreas Busse
+ * Copyright (C) 1995 - 1999 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Modified for DECStation and hence R3000 support by Paul M. Antoine
+ * Further modifications by David S. Miller and Harald Koerfgen
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#include <linux/autoconf.h>
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/cacheops.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/cachectl.h>
+#include <asm/regdef.h>
+
+ .set noreorder
+ .cprestore
+ LEAF(start)
+start:
+ bal locate
+ nop
+locate:
+ subu s8, ra, 8 /* Where we were loaded */
+ PTR_LA sp, (.stack + 8192)
+
+ move s0, a0 /* Save boot rom start args */
+ move s1, a1
+ move s2, a2
+ move s3, a3
+
+ PTR_LA a0, start /* Where we were linked to run */
+
+ move a1, s8
+ PTR_LA a2, _edata
+ subu t1, a2, a0
+ srl t1, t1, 2
+
+ /* copy text section */
+ li t0, 0
+1: lw v0, 0(a1)
+ nop
+ sw v0, 0(a0)
+ xor t0, t0, v0
+ addu a0, 4
+ bne a2, a0, 1b
+ addu a1, 4
+
+ /* Clear BSS */
+ PTR_LA a0, _edata
+ PTR_LA a2, _end
+2: sw zero, 0(a0)
+ bne a2, a0, 2b
+ addu a0, 4
+
+ move a0, s8 /* load address */
+ move a1, t1 /* length in words */
+ move a2, t0 /* checksum */
+ PTR_LA a3, (.heap) /* heap address */
+
+ PTR_LA ra, 1f
+ PTR_LA k0, decompress_kernel
+ jr k0
+ nop
+1:
+
+ move a0, s0
+ move a1, s1
+ move a2, s2
+ move a3, s3
+ li k0, KERNEL_ENTRY
+ jr k0
+ nop
+3:
+ b 3b
+ END(start)
+
+ .comm .heap, BOOT_HEAP_SIZE, 4
+ .comm .stack,4096*2,4
diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script
new file mode 100644
index 0000000..29e9f4c
--- /dev/null
+++ b/arch/mips/boot/compressed/ld.script
@@ -0,0 +1,150 @@
+OUTPUT_ARCH(mips)
+ENTRY(start)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ .init : { *(.init) } =0
+ .text :
+ {
+ _ftext = . ;
+ *(.text)
+ *(.rodata)
+ *(.rodata1)
+ /* .gnu.warning sections are handled specially by elf32.em. */
+ *(.gnu.warning)
+ } =0
+ .kstrtab : { *(.kstrtab) }
+
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ __start___dbe_table = .; /* Exception table for data bus errors */
+ __dbe_table : { *(__dbe_table) }
+ __stop___dbe_table = .;
+
+ __start___ksymtab = .; /* Kernel symbol table */
+ __ksymtab : { *(__ksymtab) }
+ __stop___ksymtab = .;
+
+ _etext = .;
+
+ . = ALIGN(8192);
+ .data.init_task : { *(.data.init_task) }
+
+ /* Startup code */
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(16);
+ __setup_start = .;
+ .setup.init : { *(.setup.init) }
+ __setup_end = .;
+ __initcall_start = .;
+ .initcall.init : { *(.initcall.init) }
+ __initcall_end = .;
+ . = ALIGN(4096); /* Align double page for init_task_union */
+ __init_end = .;
+
+ . = ALIGN(4096);
+ .data.page_aligned : { *(.data.idt) }
+
+ . = ALIGN(32);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ .fini : { *(.fini) } =0
+ .reginfo : { *(.reginfo) }
+ /* Adjust the address for the data segment. We want to adjust up to
+ the same address within the page on the next page up. It would
+ be more correct to do this:
+ . = .;
+ The current expression does not correctly handle the case of a
+ text segment ending precisely at the end of a page; it causes the
+ data segment to skip a page. The above expression does not have
+ this problem, but it will currently (2/95) cause BFD to allocate
+ a single segment, combining both text and data, for this case.
+ This will prevent the text segment from being shared among
+ multiple executions of the program; I think that is more
+ important than losing a page of the virtual address space (note
+ that no actual memory is lost; the page which is skipped can not
+ be referenced). */
+ . = .;
+ .data :
+ {
+ _fdata = . ;
+ *(.data)
+
+ /* Put the compressed image here, so bss is on the end. */
+ __image_begin = .;
+ *(.image)
+ __image_end = .;
+ /* Align the initial ramdisk image (INITRD) on page boundaries. */
+ . = ALIGN(4096);
+ __ramdisk_begin = .;
+ *(.initrd)
+ __ramdisk_end = .;
+ . = ALIGN(4096);
+
+ CONSTRUCTORS
+ }
+ .data1 : { *(.data1) }
+ _gp = . + 0x8000;
+ .lit8 : { *(.lit8) }
+ .lit4 : { *(.lit4) }
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+ .got : { *(.got.plt) *(.got) }
+ .dynamic : { *(.dynamic) }
+ /* We want the small data sections together, so single-instruction offsets
+ can access them all, and initialized data all before uninitialized, so
+ we can shorten the on-disk segment size. */
+ .sdata : { *(.sdata) }
+ . = ALIGN(4);
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __bss_start = .;
+ _fbss = .;
+ .sbss : { *(.sbss) *(.scommon) }
+ .bss :
+ {
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _end = . ;
+ PROVIDE (end = .);
+ }
+
+ /* Sections to be discarded */
+ /DISCARD/ :
+ {
+ *(.text.exit)
+ *(.data.exit)
+ *(.exitcall.exit)
+ }
+
+ /* This is the MIPS specific mdebug section. */
+ .mdebug : { *(.mdebug) }
+ /* These are needed for ELF backends which have not yet been
+ converted to the new style linker. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ /* DWARF debug sections.
+ Symbols in the .debug DWARF section are relative to the beginning of the
+ section so we begin .debug at 0. It's not clear yet what needs to happen
+ for the others. */
+ .debug 0 : { *(.debug) }
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ .line 0 : { *(.line) }
+ /* These must appear regardless of . */
+ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
+ .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
+ .comment : { *(.comment) }
+ .note : { *(.note) }
+}
--
1.6.2.1
