Some SiliconImage PCIe SATA controlers are not detected when the bus
numbers differ.
Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
---
arch/mips/pci/pcie-octeon.c | 31 +++++++++++++++++--------------
1 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 7526224..6aa5c54 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -1040,19 +1040,29 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
int bus_number = bus->number;
/*
- * We need to force the bus number to be zero on the root
- * bus. Linux numbers the 2nd root bus to start after all
- * buses on root 0.
+ * For the top level bus make sure our hardware bus number
+ * matches the software one.
*/
- if (bus->parent == NULL)
- bus_number = 0;
+ if (bus->parent == NULL) {
+ union cvmx_pciercx_cfg006 pciercx_cfg006;
+ pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port,
+ CVMX_PCIERCX_CFG006(pcie_port));
+ if (pciercx_cfg006.s.pbnum != bus_number) {
+ pciercx_cfg006.s.pbnum = bus_number;
+ pciercx_cfg006.s.sbnum = bus_number;
+ pciercx_cfg006.s.subbnum = bus_number;
+ cvmx_pcie_cfgx_write(pcie_port,
+ CVMX_PCIERCX_CFG006(pcie_port),
+ pciercx_cfg006.u32);
+ }
+ }
/*
* PCIe only has a single device connected to Octeon. It is
* always device ID 0. Don't bother doing reads for other
* device IDs on the first segment.
*/
- if ((bus_number == 0) && (devfn >> 3 != 0))
+ if ((bus->parent == NULL) && (devfn >> 3 != 0))
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
@@ -1070,7 +1080,7 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
* bridge only respondes to device ID 0, function
* 0-1
*/
- if ((bus_number == 0) && (devfn >= 2))
+ if ((bus->parent == NULL) && (devfn >= 2))
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
* The PCI-X slots are device ID 2,3. Choose one of
@@ -1167,13 +1177,6 @@ static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
int size, u32 val)
{
int bus_number = bus->number;
- /*
- * We need to force the bus number to be zero on the root
- * bus. Linux numbers the 2nd root bus to start after all
- * busses on root 0.
- */
- if (bus->parent == NULL)
- bus_number = 0;
switch (size) {
case 4:
--
1.6.0.6
