From: Maxime Bizon <mbizon@xxxxxxxxxx>
Signed-off-by: Maxime Bizon <mbizon@xxxxxxxxxx>
Signed-off-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
arch/mips/bcm63xx/Kconfig | 2
arch/mips/bcm63xx/setup.c | 2
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h | 6
arch/mips/pci/Makefile | 2
arch/mips/pci/fixup-bcm63xx.c | 21 ++
arch/mips/pci/ops-bcm63xx.c | 179 ++++++++++++++++++
arch/mips/pci/pci-bcm63xx.c | 180 +++++++++++++++++++
arch/mips/pci/pci-bcm63xx.h | 27 ++
8 files changed, 419 insertions(+)
create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
create mode 100644 arch/mips/pci/fixup-bcm63xx.c
create mode 100644 arch/mips/pci/ops-bcm63xx.c
create mode 100644 arch/mips/pci/pci-bcm63xx.c
create mode 100644 arch/mips/pci/pci-bcm63xx.h
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -3,7 +3,9 @@ menu "CPU support"
config BCM63XX_CPU_6348
bool "support 6348 CPU"
+ select HW_HAS_PCI
config BCM63XX_CPU_6358
bool "support 6358 CPU"
+ select HW_HAS_PCI
endmenu
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -108,4 +108,6 @@ void __init plat_mem_setup(void)
pm_power_off = bcm63xx_machine_halt;
set_io_port_base(0);
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
}
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_PCI_H_
+#define BCM63XX_DEV_PCI_H_
+
+extern int bcm63xx_pci_enabled;
+
+#endif /* BCM63XX_DEV_PCI_H_ */
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o
obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
+obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
+ ops-bcm63xx.o
#
# These are still pretty much in the old state, watch, go blind.
--- /dev/null
+++ b/arch/mips/pci/fixup-bcm63xx.c
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@xxxxxxxxxx>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <bcm63xx_cpu.h>
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return bcm63xx_get_irq_number(IRQ_PCI);
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
--- /dev/null
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -0,0 +1,179 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@xxxxxxxxxx>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * swizzle 32bits data to return only the needed part
+ */
+static int postprocess_read(u32 data, int where, unsigned int size)
+{
+ u32 ret;
+
+ ret = 0;
+ switch (size) {
+ case 1:
+ ret = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ ret = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ ret = data;
+ break;
+ }
+ return ret;
+}
+
+static int preprocess_write(u32 orig_data, u32 val, int where,
+ unsigned int size)
+{
+ u32 ret;
+
+ ret = 0;
+ switch (size) {
+ case 1:
+ ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ ret = val;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * setup hardware for a configuration cycle with given parameters
+ */
+static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
+ unsigned int devfn, int where)
+{
+ unsigned int slot, func, reg;
+ u32 val;
+
+ slot = PCI_SLOT(devfn);
+ func = PCI_FUNC(devfn);
+ reg = where >> 2;
+
+ /* sanity check */
+ if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
+ return 1;
+
+ if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
+ return 1;
+
+ if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
+ return 1;
+
+ /* ok, setup config access */
+ val = (reg << MPI_L2PCFG_REG_SHIFT);
+ val |= (func << MPI_L2PCFG_FUNC_SHIFT);
+ val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
+ val |= MPI_L2PCFG_CFG_USEREG_MASK;
+ val |= MPI_L2PCFG_CFG_SEL_MASK;
+ /* type 0 cycle for local bus, type 1 cycle for anything else */
+ if (type != 0) {
+ /* FIXME: how to specify bus ??? */
+ val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
+ }
+ bcm_mpi_writel(val, MPI_L2PCFG_REG);
+
+ return 0;
+}
+
+static int bcm63xx_do_cfg_read(int type, unsigned int busn,
+ unsigned int devfn, int where, int size,
+ u32 *val)
+{
+ u32 data;
+
+ /* two phase cycle, first we write address, then read data at
+ * another location, caller already has a spinlock so no need
+ * to add one here */
+ if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ iob();
+ data = le32_to_cpu(__raw_readl(pci_iospace_start));
+ /* restore IO space normal behaviour */
+ bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+ *val = postprocess_read(data, where, size);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_do_cfg_write(int type, unsigned int busn,
+ unsigned int devfn, int where, int size,
+ u32 val)
+{
+ u32 data;
+
+ /* two phase cycle, first we write address, then write data to
+ * another location, caller already has a spinlock so no need
+ * to add one here */
+ if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ iob();
+
+ data = le32_to_cpu(__raw_readl(pci_iospace_start));
+ data = preprocess_write(data, val, where, size);
+
+ __raw_writel(cpu_to_le32(data), pci_iospace_start);
+ wmb();
+ /* no way to know the access is done, we have to wait */
+ udelay(500);
+ /* restore IO space normal behaviour */
+ bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ int type;
+
+ type = bus->parent ? 1 : 0;
+
+ if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return bcm63xx_do_cfg_read(type, bus->number, devfn,
+ where, size, val);
+}
+
+static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ int type;
+
+ type = bus->parent ? 1 : 0;
+
+ if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return bcm63xx_do_cfg_write(type, bus->number, devfn,
+ where, size, val);
+}
+
+struct pci_ops bcm63xx_pci_ops = {
+ .read = bcm63xx_pci_read,
+ .write = bcm63xx_pci_write
+};
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -0,0 +1,180 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@xxxxxxxxxx>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * Allow PCI to be disabled at runtime depending on board nvram
+ * configuration
+ */
+int bcm63xx_pci_enabled;
+
+static struct resource bcm_pci_mem_resource = {
+ .name = "bcm63xx PCI memory space",
+ .start = BCM_PCI_MEM_BASE_PA,
+ .end = BCM_PCI_MEM_END_PA,
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource bcm_pci_io_resource = {
+ .name = "bcm63xx PCI IO space",
+ .start = BCM_PCI_IO_BASE_PA,
+ .end = BCM_PCI_IO_END_PA,
+ .flags = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_controller = {
+ .pci_ops = &bcm63xx_pci_ops,
+ .io_resource = &bcm_pci_io_resource,
+ .mem_resource = &bcm_pci_mem_resource,
+};
+
+static u32 bcm63xx_int_cfg_readl(u32 reg)
+{
+ u32 tmp;
+
+ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+ iob();
+ return bcm_mpi_readl(MPI_PCICFGDATA_REG);
+}
+
+static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
+{
+ u32 tmp;
+
+ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+ bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
+}
+
+void __iomem *pci_iospace_start;
+
+static int __init bcm63xx_pci_init(void)
+{
+ unsigned int mem_size;
+ u32 val;
+
+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+ return -ENODEV;
+
+ if (!bcm63xx_pci_enabled)
+ return -ENODEV;
+
+ /*
+ * configuration access are done through IO space, remap 4
+ * first bytes to access it from CPU.
+ *
+ * this means that no io access from CPU should happen while
+ * we do a configuration cycle, but there's no way we can add
+ * a spinlock for each io access, so this is currently kind of
+ * broken on SMP.
+ */
+ pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4);
+ if (!pci_iospace_start)
+ return -ENOMEM;
+
+ /* setup local bus to PCI access (PCI memory) */
+ val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+ bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
+ bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
+ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
+
+ /* set Cardbus IDSEL (type 0 cfg access on primary bus for
+ * this IDSEL will be done on Cardbus instead) */
+ val = bcm_pcmcia_readl(PCMCIA_C1_REG);
+ val &= ~PCMCIA_C1_CBIDSEL_MASK;
+ val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
+ bcm_pcmcia_writel(val, PCMCIA_C1_REG);
+
+ /* disable second access windows */
+ bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
+
+ /* setup local bus to PCI access (IO memory), we have only 1
+ * IO window for both PCI and cardbus, but it cannot handle
+ * both at the same time, assume standard PCI for now, if
+ * cardbus card has IO zone, PCI fixup will change window to
+ * cardbus */
+ val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
+ bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
+ bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
+ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
+
+ /* enable PCI related GPIO pins */
+ bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
+
+ /* setup PCI to local bus access, used by PCI device to target
+ * local RAM while bus mastering */
+ bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
+ if (BCMCPU_IS_6358())
+ val = MPI_SP0_REMAP_ENABLE_MASK;
+ else
+ val = 0;
+ bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
+
+ bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
+ bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
+
+ mem_size = bcm63xx_get_memory_size();
+
+ /* 6348 before rev b0 exposes only 16 MB of RAM memory through
+ * PCI, throw a warning if we have more memory */
+ if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
+ if (mem_size > (16 * 1024 * 1024))
+ printk(KERN_WARNING "bcm63xx: this CPU "
+ "revision cannot handle more than 16MB "
+ "of RAM for PCI bus mastering\n");
+ } else {
+ /* setup sp0 range to local RAM size */
+ bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
+ bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
+ }
+
+ /* change host bridge retry counter to infinite number of
+ * retry, needed for some broadcom wifi cards with Silicon
+ * Backplane bus where access to srom seems very slow */
+ val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
+ val &= ~REG_TIMER_RETRY_MASK;
+ bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
+
+ /* enable memory decoder and bus mastering */
+ val = bcm63xx_int_cfg_readl(PCI_COMMAND);
+ val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ bcm63xx_int_cfg_writel(val, PCI_COMMAND);
+
+ /* enable read prefetching & disable byte swapping for bus
+ * mastering transfers */
+ val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
+ val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
+ val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
+ val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
+ val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
+ bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
+
+ /* enable pci interrupt */
+ val = bcm_mpi_readl(MPI_LOCINT_REG);
+ val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
+ bcm_mpi_writel(val, MPI_LOCINT_REG);
+
+ register_pci_controller(&bcm63xx_controller);
+
+ /* mark memory space used for IO mapping as reserved */
+ request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
+ "bcm63xx PCI IO space");
+ return 0;
+}
+
+arch_initcall(bcm63xx_pci_init);
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.h
@@ -0,0 +1,27 @@
+#ifndef PCI_BCM63XX_H_
+#define PCI_BCM63XX_H_
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_pci.h>
+
+/*
+ * Cardbus shares the PCI bus, but has no IDSEL, so a special id is
+ * reserved for it. If you have a standard PCI device at this id, you
+ * need to change the following definition.
+ */
+#define CARDBUS_PCI_IDSEL 0x8
+
+/*
+ * defined in ops-bcm63xx.c
+ */
+extern struct pci_ops bcm63xx_pci_ops;
+extern struct pci_ops bcm63xx_cb_ops;
+
+/*
+ * defined in pci-bcm63xx.c
+ */
+extern void __iomem *pci_iospace_start;
+
+#endif /* ! PCI_BCM63XX_H_ */
