[PATCH 5/7] Alchemy: new PCMCIA socket driver for devboards.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000)
Notable features:
	- it builds for all supported boards.
	- support for carddetect and statuschange (disabled) IRQs.
	- pcmcia socket mem/io/attr areas and irqs passed through
	  platform resource information.
	- doesn't freeze system during card insertion/ejection like
	  the old one.

Also add platform device registration and missing interrupts for all
boards supported by this driver.

Run-tested on Db1200;  however since all of these boards have an
identical PCMCIA setup (at least eletrically; some differ in
IRQs used) I'm fairly confident that it works on them too.

Signed-off-by: Manuel Lauss <manuel.lauss@xxxxxxxxx>
---
 arch/mips/alchemy/common/platform.c              |    6 -
 arch/mips/alchemy/common/setup.c                 |    3 +-
 arch/mips/alchemy/devboards/db1200/platform.c    |  113 ++++
 arch/mips/alchemy/devboards/db1x00/Makefile      |    3 +-
 arch/mips/alchemy/devboards/db1x00/irqmap.c      |   18 +-
 arch/mips/alchemy/devboards/db1x00/platform.c    |  166 +++++
 arch/mips/alchemy/devboards/pb1100/Makefile      |    3 +-
 arch/mips/alchemy/devboards/pb1100/platform.c    |   83 +++
 arch/mips/alchemy/devboards/pb1200/platform.c    |  113 ++++-
 arch/mips/alchemy/devboards/pb1500/Makefile      |    3 +-
 arch/mips/alchemy/devboards/pb1500/board_setup.c |    3 +
 arch/mips/alchemy/devboards/pb1500/platform.c    |   83 +++
 arch/mips/alchemy/devboards/pb1550/Makefile      |    3 +-
 arch/mips/alchemy/devboards/pb1550/board_setup.c |    6 +
 arch/mips/alchemy/devboards/pb1550/platform.c    |  126 ++++
 arch/mips/include/asm/mach-au1x00/au1000.h       |   14 +
 arch/mips/include/asm/mach-db1x00/db1200.h       |   15 -
 arch/mips/include/asm/mach-db1x00/db1x00.h       |    8 -
 arch/mips/include/asm/mach-pb1x00/pb1100.h       |    7 -
 arch/mips/include/asm/mach-pb1x00/pb1200.h       |   14 -
 arch/mips/include/asm/mach-pb1x00/pb1500.h       |    7 -
 arch/mips/include/asm/mach-pb1x00/pb1550.h       |    7 -
 drivers/pcmcia/Kconfig                           |   17 +-
 drivers/pcmcia/Makefile                          |    9 +-
 drivers/pcmcia/au1000_db1x00.c                   |  305 ----------
 drivers/pcmcia/db1xxx_ss.c                       |  700 ++++++++++++++++++++++
 26 files changed, 1440 insertions(+), 395 deletions(-)
 create mode 100644 arch/mips/alchemy/devboards/db1x00/platform.c
 create mode 100644 arch/mips/alchemy/devboards/pb1100/platform.c
 create mode 100644 arch/mips/alchemy/devboards/pb1500/platform.c
 create mode 100644 arch/mips/alchemy/devboards/pb1550/platform.c
 delete mode 100644 drivers/pcmcia/au1000_db1x00.c
 create mode 100644 drivers/pcmcia/db1xxx_ss.c

diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 117f99f..2b76a57 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -308,11 +308,6 @@ static struct platform_device au1200_mmc1_device = {
 #endif /* #ifndef CONFIG_MIPS_DB1200 */
 #endif /* #ifdef CONFIG_SOC_AU1200 */
 
-static struct platform_device au1x00_pcmcia_device = {
-	.name 		= "au1x00-pcmcia",
-	.id 		= 0,
-};
-
 /* All Alchemy demoboards with I2C have this #define in their headers */
 #ifdef SMBUS_PSC_BASE
 static struct resource pbdb_smbus_resources[] = {
@@ -334,7 +329,6 @@ static struct platform_device pbdb_smbus_device = {
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xx0_uart_device,
 	&au1xxx_usb_ohci_device,
-	&au1x00_pcmcia_device,
 #ifdef CONFIG_FB_AU1100
 	&au1100_lcd_device,
 #endif
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 3f036b3..e8d27f6 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -103,7 +103,8 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 	 * The pseudo address we use is 0xF400 0000. Any address over
 	 * 0xF400 0000 is a PCMCIA pseudo address.
 	 */
-	if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
+	if ((phys_addr >= PCMCIA_ATTR_PSEUDO_PHYS) &&
+	    (phys_addr < PCMCIA_PSEUDO_END))
 		return (phys_t)(phys_addr << 4);
 
 	/* default nop */
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c
index b3142e0..fb63026 100644
--- a/arch/mips/alchemy/devboards/db1200/platform.c
+++ b/arch/mips/alchemy/devboards/db1200/platform.c
@@ -352,6 +352,117 @@ struct au1xmmc_platform_data au1xmmc_platdata[] = {
 
 /**********************************************************************/
 
+static struct resource db1200_pcmcia0_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x0001000 - 1,
+	},
+	{
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1200_PC0_INT,
+		.end	= DB1200_PC0_INT,
+	},
+#if 0 /* more trouble than it's worth */
+	{
+		.name	= "stschg",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1200_PC0_STSCHG_INT,
+		.end	= DB1200_PC0_STSCHG_INT,
+	},
+#endif
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1200_PC0_INSERT_INT,
+		.end	= DB1200_PC0_INSERT_INT,
+	},
+	{
+		.name	= "eject",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1200_PC0_EJECT_INT,
+		.end	= DB1200_PC0_EJECT_INT,
+	},
+};
+
+static struct platform_device db1200_pcmcia0_dev = {
+	.name		= "pb1200_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(db1200_pcmcia0_res),
+	.resource	= db1200_pcmcia0_res,
+};
+
+/* mem/io resources of 2nd socket at offset 0x00400000 from 1st */
+static struct resource db1200_pcmcia1_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS + 0x00400000,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS + 0x00400000,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1,
+	},
+	{
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1200_PC1_INT,
+		.end	= DB1200_PC1_INT,
+	},
+#if 0 /* more trouble than it's worth */
+	{
+		.name	= "stschg",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1200_PC1_STSCHG_INT,
+		.end	= DB1200_PC1_STSCHG_INT,
+	},
+#endif
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1200_PC1_INSERT_INT,
+		.end	= DB1200_PC1_INSERT_INT,
+	},
+	{
+		.name	= "eject",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1200_PC1_EJECT_INT,
+		.end	= DB1200_PC1_EJECT_INT,
+	},
+};
+
+static struct platform_device db1200_pcmcia1_dev = {
+	.name		= "pb1200_pcmcia",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(db1200_pcmcia1_res),
+	.resource	= db1200_pcmcia1_res,
+};
+
+/**********************************************************************/
+
 static struct resource psc0_res[] = {
 	[0] = {
 		.start	= CPHYSADDR(PSC0_BASE_ADDR),
@@ -416,6 +527,8 @@ static struct platform_device *db1200_devs[] __initdata = {
 	&smc91x_dev,
 	&rtc_dev,
 	&nand_dev,
+	&db1200_pcmcia0_dev,
+	&db1200_pcmcia1_dev,
 };
 
 static int __init db1200_dev_init(void)
diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile
index 432241a..5024d16 100644
--- a/arch/mips/alchemy/devboards/db1x00/Makefile
+++ b/arch/mips/alchemy/devboards/db1x00/Makefile
@@ -5,4 +5,5 @@
 # Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
 #
 
-obj-y := board_setup.o irqmap.o
+obj-y := board_setup.o irqmap.o platform.o
+
diff --git a/arch/mips/alchemy/devboards/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c
index 0b09025..b882bf2 100644
--- a/arch/mips/alchemy/devboards/db1x00/irqmap.c
+++ b/arch/mips/alchemy/devboards/db1x00/irqmap.c
@@ -65,23 +65,23 @@ char irq_tab_alchemy[][5] __initdata = {
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 
-#ifndef CONFIG_MIPS_MIRAGE
-#ifdef CONFIG_MIPS_DB1550
-	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
-	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
+#if defined(CONFIG_MIPS_MIRAGE)
+	{ AU1000_GPIO_7,  IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
+#elif defined(CONFIG_MIPS_DB1550)
+	{ AU1000_GPIO_0,  IRQF_TRIGGER_LOW, 0 }, /* PCMCIA CD0# */
+	{ AU1000_GPIO_1,  IRQF_TRIGGER_LOW, 0 }, /* PCMCIA CD1# */
+	{ AU1000_GPIO_3,  IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
+	{ AU1000_GPIO_5,  IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
+	{ AU1000_GPIO_21, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA STSCHG0# */
+	{ AU1000_GPIO_22, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA STSCHG1# */
 #else
 	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
 	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
 	{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
-
 	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
 	{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
 	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
 #endif
-#else
-	{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
-#endif
-
 };
 
 void __init board_init_irq(void)
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c
new file mode 100644
index 0000000..1b50b1a
--- /dev/null
+++ b/arch/mips/alchemy/devboards/db1x00/platform.c
@@ -0,0 +1,166 @@
+/*
+ * DBAu1xxx board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+    defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#define DB1XXX_HAS_PCMCIA
+#endif
+
+/* DB1xxx PCMCIA interrupt sources:
+ * CD0/1 	GPIO0/3
+ * STSCHG0/1	GPIO1/4
+ * CARD0/1	GPIO2/5
+ * Db1550:	0/1, 21/22, 3/5
+ */
+#ifndef CONFIG_MIPS_DB1550
+/* Db1000, Db1100, Db1500 */
+#define DB1XXX_PCMCIA_DRVNAME	"db1xxx_pcmcia"
+#define DB1XXX_PCMCIA_CD0	AU1000_GPIO_0
+#define DB1XXX_PCMCIA_STSCHG0	AU1000_GPIO_1
+#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO_2
+#define DB1XXX_PCMCIA_CD1	AU1000_GPIO_3
+#define DB1XXX_PCMCIA_STSCHG1	AU1000_GPIO_4
+#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO_5
+#else
+#define DB1XXX_PCMCIA_DRVNAME	"pb1550_pcmcia"
+#define DB1XXX_PCMCIA_CD0	AU1000_GPIO_0
+#define DB1XXX_PCMCIA_STSCHG0	AU1500_GPIO_21
+#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO_3
+#define DB1XXX_PCMCIA_CD1	AU1000_GPIO_1
+#define DB1XXX_PCMCIA_STSCHG1	AU1500_GPIO_22
+#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO_5
+#endif
+
+#ifdef DB1XXX_HAS_PCMCIA
+static struct resource db1xxx_pcmcia0_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x0001000 - 1,
+	},
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1XXX_PCMCIA_CD0,
+		.end	= DB1XXX_PCMCIA_CD0,
+	},
+#if 0 /* more trouble than it's worth */
+	{
+		.name	= "stschg",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1XXX_PCMCIA_STSCHG0,
+		.end	= DB1XXX_PCMCIA_STSCHG0,
+	},
+#endif
+	{
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1XXX_PCMCIA_CARD0,
+		.end	= DB1XXX_PCMCIA_CARD0,
+	},
+};
+
+static struct platform_device db1xxx_pcmcia0_dev = {
+	.name		= DB1XXX_PCMCIA_DRVNAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(db1xxx_pcmcia0_res),
+	.resource	= db1xxx_pcmcia0_res,
+};
+
+/* mem/io resources of 2nd socket at offset 0x00400000 from 1st */
+static struct resource db1xxx_pcmcia1_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS + 0x00400000,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS + 0x00400000,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1,
+	},
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1XXX_PCMCIA_CD1,
+		.end	= DB1XXX_PCMCIA_CD1,
+	},
+#if 0 /* more trouble than it's worth */
+	{
+		.name	= "stschg",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1XXX_PCMCIA_STSCHG1,
+		.end	= DB1XXX_PCMCIA_STSCHG1,
+	},
+#endif
+	{
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= DB1XXX_PCMCIA_CARD1,
+		.end	= DB1XXX_PCMCIA_CARD1,
+	},
+};
+
+static struct platform_device db1xxx_pcmcia1_dev = {
+	.name		= DB1XXX_PCMCIA_DRVNAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(db1xxx_pcmcia1_res),
+	.resource	= db1xxx_pcmcia1_res,
+};
+#endif
+
+static struct platform_device *db1xxx_devs[] __initdata = {
+#ifdef DB1XXX_HAS_PCMCIA
+	&db1xxx_pcmcia0_dev,
+	&db1xxx_pcmcia1_dev,
+#endif
+};
+
+static int __init db1xxx_dev_init(void)
+{
+	return platform_add_devices(db1xxx_devs, ARRAY_SIZE(db1xxx_devs));
+}
+device_initcall(db1xxx_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile
index c586dd7..60cf5b9 100644
--- a/arch/mips/alchemy/devboards/pb1100/Makefile
+++ b/arch/mips/alchemy/devboards/pb1100/Makefile
@@ -5,4 +5,5 @@
 # Makefile for the Alchemy Semiconductor Pb1100 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
+
diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c
new file mode 100644
index 0000000..fb52b4b
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1100/platform.c
@@ -0,0 +1,83 @@
+/*
+ * Pb1100 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+
+/* PCMCIA. single socket, identical to Pb1500 */
+static struct resource pb1100_pcmcia_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x0001000 - 1,
+	},
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1000_GPIO_9,
+		.end	= AU1000_GPIO_9,
+	},
+#if 0	/* more trouble than it's worth */
+	{
+		.name	= "stschg",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1000_GPIO_10,
+		.end	= AU1000_GPIO_10,
+	},
+#endif
+	{
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1000_GPIO_11,
+		.end	= AU1000_GPIO_11,
+	},
+};
+
+static struct platform_device pb1100_pcmcia_dev = {
+	.name		= "pb1100_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(pb1100_pcmcia_res),
+	.resource	= pb1100_pcmcia_res,
+};
+
+static struct platform_device *pb1100_devs[] __initdata = {
+	&pb1100_pcmcia_dev,
+};
+
+static int __init pb1100_dev_init(void)
+{
+	return platform_add_devices(pb1100_devs, ARRAY_SIZE(pb1100_devs));
+}
+device_initcall(pb1100_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c
index 4d6edd8..c49fb10 100644
--- a/arch/mips/alchemy/devboards/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200/platform.c
@@ -158,9 +158,120 @@ static struct platform_device smc91c111_device = {
 	.resource	= smc91c111_resources
 };
 
+static struct resource pb1200_pcmcia0_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x0001000 - 1,
+	},
+	{
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= PB1200_PC0_INT,
+		.end	= PB1200_PC0_INT,
+	},
+#if 0 /* more trouble than what it's worth */
+	{
+		.name	= "stschg",
+		.flags	= IORESOURCE_IRQ,
+		.start	= PB1200_PC0_STSCHG_INT,
+		.end	= PB1200_PC0_STSCHG_INT,
+	},
+#endif
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= PB1200_PC0_INSERT_INT,
+		.end	= PB1200_PC0_INSERT_INT,
+	},
+	{
+		.name	= "eject",
+		.flags	= IORESOURCE_IRQ,
+		.start	= PB1200_PC0_EJECT_INT,
+		.end	= PB1200_PC0_EJECT_INT,
+	},
+};
+
+static struct platform_device pb1200_pcmcia0_dev = {
+	.name		= "pb1200_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(pb1200_pcmcia0_res),
+	.resource	= pb1200_pcmcia0_res,
+};
+
+/* mem/io resources of 2nd socket at offset 0x00800000 from 1st */
+static struct resource pb1200_pcmcia1_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00800000,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00840000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS + 0x00800000,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS + 0x00800000,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1,
+	},
+	{
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= PB1200_PC1_INT,
+		.end	= PB1200_PC1_INT,
+	},
+#if 0	/* too much trouble than what it's worth */
+	{
+		.name	= "stschg",
+		.flags	= IORESOURCE_IRQ,
+		.start	= PB1200_PC1_STSCHG_INT,
+		.end	= PB1200_PC1_STSCHG_INT,
+	},
+#endif
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= PB1200_PC1_INSERT_INT,
+		.end	= PB1200_PC1_INSERT_INT,
+	},
+	{
+		.name	= "eject",
+		.flags	= IORESOURCE_IRQ,
+		.start	= PB1200_PC1_EJECT_INT,
+		.end	= PB1200_PC1_EJECT_INT,
+	},
+};
+
+static struct platform_device pb1200_pcmcia1_dev = {
+	.name		= "pb1200_pcmcia",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(pb1200_pcmcia1_res),
+	.resource	= pb1200_pcmcia1_res,
+};
+
 static struct platform_device *board_platform_devices[] __initdata = {
 	&ide_device,
-	&smc91c111_device
+	&smc91c111_device,
+	&pb1200_pcmcia0_dev,
+	&pb1200_pcmcia1_dev
 };
 
 static int __init board_register_devices(void)
diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile
index 173b419..c29545d 100644
--- a/arch/mips/alchemy/devboards/pb1500/Makefile
+++ b/arch/mips/alchemy/devboards/pb1500/Makefile
@@ -5,4 +5,5 @@
 # Makefile for the Alchemy Semiconductor Pb1500 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
+
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index d7a5656..998b01b 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -40,6 +40,9 @@ char irq_tab_alchemy[][5] __initdata = {
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+	{ AU1000_GPIO_9,   IRQF_TRIGGER_LOW, 0 },
+	{ AU1000_GPIO_10,  IRQF_TRIGGER_LOW, 0 },
+	{ AU1000_GPIO_11,  IRQF_TRIGGER_LOW, 0 },
 	{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
 	{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
 	{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c
new file mode 100644
index 0000000..36a4034
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1500/platform.c
@@ -0,0 +1,83 @@
+/*
+ * Pb1500 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+
+/* PCMCIA: single socket, identical to PB1100 */
+static struct resource pb1500_pcmcia_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x0001000 - 1,
+	},
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1000_GPIO_9,
+		.end	= AU1000_GPIO_9,
+	},
+#if 0 /* more trouble than it's worth */
+	{
+		.name	= "stschg",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1000_GPIO_10,
+		.end	= AU1000_GPIO_10,
+	},
+#endif
+	{
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1000_GPIO_11,
+		.end	= AU1000_GPIO_11,
+	},
+};
+
+static struct platform_device pb1500_pcmcia_dev = {
+	.name		= "pb1100_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(pb1500_pcmcia_res),
+	.resource	= pb1500_pcmcia_res,
+};
+
+static struct platform_device *pb1500_devs[] __initdata = {
+	&pb1500_pcmcia_dev,
+};
+
+static int __init pb1500_dev_init(void)
+{
+	return platform_add_devices(pb1500_devs, ARRAY_SIZE(pb1500_devs));
+}
+device_initcall(pb1500_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile
index cff95bc..86b410b 100644
--- a/arch/mips/alchemy/devboards/pb1550/Makefile
+++ b/arch/mips/alchemy/devboards/pb1550/Makefile
@@ -5,4 +5,5 @@
 # Makefile for the Alchemy Semiconductor Pb1550 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
+
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index b6e9e7d..92d1d9f 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -32,6 +32,7 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/gpio.h>
 
 #include <prom.h>
 
@@ -44,6 +45,7 @@ char irq_tab_alchemy[][5] __initdata = {
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
 	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_201_205, IRQF_TRIGGER_LOW, 0 },
 };
 
 const char *get_system_type(void)
@@ -59,6 +61,8 @@ void board_reset(void)
 
 void __init board_init_irq(void)
 {
+	alchemy_gpio2_enable_int(201);
+	alchemy_gpio2_enable_int(202);
 	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
 }
 
@@ -76,6 +80,8 @@ void __init board_setup(void)
 	}
 #endif
 
+	alchemy_gpio2_enable();
+
 	/*
 	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
 	 * but it is board specific code, so put it here.
diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c
new file mode 100644
index 0000000..24657cb
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1550/platform.c
@@ -0,0 +1,126 @@
+/*
+ * Pb1550 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1550.h>
+
+/* Pb1550, like all others, also has statuschange irqs; however they're
+ * wired up on one of the Au1550's shared GPIO201_205 line, which also
+ * services the PCMCIA card interrupts.  So we ignore statuschange and
+ * use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
+ * drivers are used to shared irqs and b) statuschange isn't really use-
+ * ful anyway.
+ */
+static struct resource pb1550_pcmcia0_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x0001000 - 1,
+	},
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1000_GPIO_0,
+		.end	= AU1000_GPIO_0,
+	},
+	{ /* is GPIO_201, but this one shares an IRQ with 201-205 */
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1500_GPIO_201_205,
+		.end	= AU1500_GPIO_201_205,
+	},
+};
+
+static struct platform_device pb1550_pcmcia0_dev = {
+	.name		= "pb1550_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(pb1550_pcmcia0_res),
+	.resource	= pb1550_pcmcia0_res,
+};
+
+/* mem/io resources of 2nd socket at offset 0x00800000 from 1st */
+static struct resource pb1550_pcmcia1_res[] = {
+	{
+		.name	= "pseudo-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00800000,
+		.end	= PCMCIA_ATTR_PSEUDO_PHYS + 0x00840000 - 1,
+	},
+	{
+		.name	= "pseudo-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PSEUDO_PHYS + 0x00800000,
+		.end	= PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1,
+	},
+	{
+		.name	= "pseudo-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PSEUDO_PHYS + 0x00800000,
+		.end	= PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1,
+	},
+	{
+		.name	= "insert",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1000_GPIO_1,
+		.end	= AU1000_GPIO_1,
+	},
+	{ /* is GPIO_202, but this one shares an IRQ with 201-205 */
+		.name	= "card",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AU1500_GPIO_201_205,
+		.end	= AU1500_GPIO_201_205,
+	},
+};
+
+static struct platform_device pb1550_pcmcia1_dev = {
+	.name		= "pb1550_pcmcia",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(pb1550_pcmcia1_res),
+	.resource	= pb1550_pcmcia1_res,
+};
+
+static struct platform_device *pb1550_devs[] __initdata = {
+	&pb1550_pcmcia0_dev,
+	&pb1550_pcmcia1_dev
+};
+
+static int __init pb1550_dev_init(void)
+{
+	return platform_add_devices(pb1550_devs,
+				    ARRAY_SIZE(pb1550_devs));
+}
+device_initcall(pb1550_dev_init);
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 854e95f..df04e91 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -1739,6 +1739,20 @@ enum soc_au1200_ints {
 
 #endif
 
+/*
+ * All Au1xx0 SOCs have a PCMCIA controller.
+ * We setup our 32-bit pseudo addresses to be equal to the
+ * 36-bit addr >> 4, to make it easier to check the address
+ * and fix it.
+ * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
+ * The pseudo address we use is 0xF400 0000. Any address over
+ * 0xF400 0000 is a PCMCIA pseudo address.
+ */
+#define PCMCIA_IO_PSEUDO_PHYS	(PCMCIA_IO_PHYS_ADDR >> 4)
+#define PCMCIA_ATTR_PSEUDO_PHYS	(PCMCIA_ATTR_PHYS_ADDR >> 4)
+#define PCMCIA_MEM_PSEUDO_PHYS	(PCMCIA_MEM_PHYS_ADDR >> 4)
+#define PCMCIA_PSEUDO_END	(0xffffffff)
+
 #ifndef _LANGUAGE_ASSEMBLY
 typedef volatile struct {
 	/* 0x0000 */ u32 toytrim;
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
index 2a54103..acb7042 100644
--- a/arch/mips/include/asm/mach-db1x00/db1200.h
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -190,21 +190,6 @@ enum external_pb1200_ints {
 	DB1200_INT_END		= DB1200_INT_BEGIN + 15,
 };
 
-
-/*
- * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
- */
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-#define BOARD_PC0_INT	DB1200_PC0_INT
-#define BOARD_PC1_INT	DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-
 /* NAND chip select */
 #define NAND_CS 1
 
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
index 1a515b8..d654434 100644
--- a/arch/mips/include/asm/mach-db1x00/db1x00.h
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -137,14 +137,6 @@ typedef volatile struct
 
 #define BCSR_SWRESET_RESET		0x0080
 
-/* PCMCIA DBAu1x00 specific defines */
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
 /*
  * NAND defines
  *
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h
index b1a60f1..2621f65 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1100.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1100.h
@@ -75,11 +75,4 @@
  */
 #define PB1100_HEX_LED		0xAE000018
 
-/* PCMCIA Pb1100 specific defines */
-#define PCMCIA_MAX_SOCK  0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
-
 #endif /* __ASM_PB1100_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
index c8618df..fa1c295 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1200.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -239,20 +239,6 @@ enum external_pb1200_ints {
 	PB1200_INT_END		= PB1200_INT_BEGIN + 15
 };
 
-/*
- * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
- */
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-#define BOARD_PC0_INT	PB1200_PC0_INT
-#define BOARD_PC1_INT	PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-
 /* NAND chip select */
 #define NAND_CS 1
 
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h
index da51a2e..66b770a 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1500.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1500.h
@@ -39,11 +39,4 @@
 #define PB1500_HEX_LED		0xAF000004
 #define PB1500_HEX_LED_BLANK	0xAF000008
 
-/* PCMCIA Pb1500 specific defines */
-#define PCMCIA_MAX_SOCK  0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
-
 #endif /* __ASM_PB1500_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
index 6704a11..c437d9b 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1550.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -129,13 +129,6 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
 #define BCSR_SYSTEM_POWEROFF	0x4000
 #define BCSR_SYSTEM_RESET	0x8000
 
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
 #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
 #define PB1550_BOTH_BANKS
 #elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 2764735..c94ba1e 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -82,7 +82,7 @@ config PCMCIA_IOCTL
 	  If unsure, say Y.
 
 config CARDBUS
-	bool "32-bit CardBus support"	
+	bool "32-bit CardBus support"
 	depends on PCI
 	default y
 	---help---
@@ -105,8 +105,8 @@ config YENTA
 	select PCCARD_NONSTATIC
 	---help---
 	  This option enables support for CardBus host bridges.  Virtually
-	  all modern PCMCIA bridges are CardBus compatible.  A "bridge" is 
-	  the hardware inside your computer that PCMCIA cards are plugged 
+	  all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
+	  the hardware inside your computer that PCMCIA cards are plugged
 	  into.
 
 	  To compile this driver as modules, choose M here: the
@@ -192,6 +192,17 @@ config PCMCIA_AU1X00
 	tristate "Au1x00 pcmcia support"
 	depends on SOC_AU1X00 && PCMCIA
 
+config PCMCIA_ALCHEMY_DEVBOARD
+	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
+	depends on SOC_AU1X00 && PCMCIA
+	select 64BIT_PHYS_ADDR
+	help
+	  Enable this driver of you want PCMCIA support on your Alchemy
+	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
+	  NOT suitable for the PB1000!
+
+	  This driver is also available as a module called db1xxx_ss.ko
+
 config PCMCIA_SA1100
 	tristate "SA1100 support"
 	depends on ARM && ARCH_SA1100 && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index bbac463..3c52108 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -33,20 +33,13 @@ obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
 obj-$(CONFIG_BFIN_CFPCMCIA)			+= bfin_cf_pcmcia.o
 obj-$(CONFIG_AT91_CF)				+= at91_cf.o
 obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
+obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD)		+= db1xxx_ss.o
 
 sa11xx_core-y					+= soc_common.o sa11xx_base.o
 pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
 
 au1x00_ss-y					+= au1000_generic.o
 au1x00_ss-$(CONFIG_MIPS_PB1000)			+= au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1100)			+= au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1200)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1500)			+= au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1000)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1100)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1200)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1500)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1550)			+= au1000_db1x00.o
 au1x00_ss-$(CONFIG_MIPS_XXS1500)		+= au1000_xxs1500.o
 
 sa1111_cs-y					+= sa1111_generic.o
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
deleted file mode 100644
index c78d77f..0000000
--- a/drivers/pcmcia/au1000_db1x00.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- *
- * Alchemy Semi Db1x00 boards specific pcmcia routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@xxxxxxxxxx or source@xxxxxxxxxx
- *
- * Copyright 2004 Pete Popov, updated the driver to 2.6.
- * Followed the sa11xx API and largely copied many of the hardware
- * independent functions.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#if defined(CONFIG_MIPS_DB1200)
-	#include <db1200.h>
-#elif defined(CONFIG_MIPS_PB1200)
-	#include <pb1200.h>
-#else
-	#include <asm/mach-db1x00/db1x00.h>
-	static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-#endif
-
-#include "au1000_generic.h"
-
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
-
-
-struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
-extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
-
-static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt)
-{
-#ifdef CONFIG_MIPS_DB1550
-	skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
-#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-	skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
-#else
-	skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
-#endif
-	return 0;
-}
-
-static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt)
-{
-	bcsr->pcmcia = 0; /* turn off power */
-	au_sync_delay(2);
-}
-
-static void
-db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state)
-{
-	u32 inserted;
-	unsigned char vs;
-
-	state->ready = 0;
-	state->vs_Xv = 0;
-	state->vs_3v = 0;
-	state->detect = 0;
-
-	switch (skt->nr) {
-	case 0:
-		vs = bcsr->status & 0x3;
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-		inserted = BOARD_CARD_INSERTED(0);
-#else
-		inserted = !(bcsr->status & (1<<4));
-#endif
-		break;
-	case 1:
-		vs = (bcsr->status & 0xC)>>2;
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-		inserted = BOARD_CARD_INSERTED(1);
-#else
-		inserted = !(bcsr->status & (1<<5));
-#endif
-		break;
-	default:/* should never happen */
-		return;
-	}
-
-	if (inserted)
-		debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n",
-				skt->nr, inserted, vs, bcsr->pcmcia);
-
-	if (inserted) {
-		switch (vs) {
-			case 0:
-			case 2:
-				state->vs_3v=1;
-				break;
-			case 3: /* 5V */
-				break;
-			default:
-				/* return without setting 'detect' */
-				printk(KERN_ERR "db1x00 bad VS (%d)\n",
-						vs);
-		}
-		state->detect = 1;
-		state->ready = 1;
-	}
-	else {
-		/* if the card was previously inserted and then ejected,
-		 * we should turn off power to it
-		 */
-		if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) {
-			bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST |
-					BCSR_PCMCIA_PC0DRVEN |
-					BCSR_PCMCIA_PC0VPP |
-					BCSR_PCMCIA_PC0VCC);
-			au_sync_delay(10);
-		}
-		else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) {
-			bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST |
-					BCSR_PCMCIA_PC1DRVEN |
-					BCSR_PCMCIA_PC1VPP |
-					BCSR_PCMCIA_PC1VCC);
-			au_sync_delay(10);
-		}
-	}
-
-	state->bvd1=1;
-	state->bvd2=1;
-	state->wrprot=0;
-}
-
-static int
-db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state)
-{
-	u16 pwr;
-	int sock = skt->nr;
-
-	debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n",
-			sock, state->Vcc, state->Vpp,
-			state->flags & SS_RESET);
-
-	/* pcmcia reg was set to zero at init time. Be careful when
-	 * initializing a socket not to wipe out the settings of the
-	 * other socket.
-	 */
-	pwr = bcsr->pcmcia;
-	pwr &= ~(0xf << sock*8); /* clear voltage settings */
-
-	state->Vpp = 0;
-	switch(state->Vcc){
-		case 0:  /* Vcc 0 */
-			pwr |= SET_VCC_VPP(0,0,sock);
-			break;
-		case 50: /* Vcc 5V */
-			switch(state->Vpp) {
-				case 0:
-					pwr |= SET_VCC_VPP(2,0,sock);
-					break;
-				case 50:
-					pwr |= SET_VCC_VPP(2,1,sock);
-					break;
-				case 12:
-					pwr |= SET_VCC_VPP(2,2,sock);
-					break;
-				case 33:
-				default:
-					pwr |= SET_VCC_VPP(0,0,sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n",
-							__func__,
-							state->Vcc,
-							state->Vpp);
-					break;
-			}
-			break;
-		case 33: /* Vcc 3.3V */
-			switch(state->Vpp) {
-				case 0:
-					pwr |= SET_VCC_VPP(1,0,sock);
-					break;
-				case 12:
-					pwr |= SET_VCC_VPP(1,2,sock);
-					break;
-				case 33:
-					pwr |= SET_VCC_VPP(1,1,sock);
-					break;
-				case 50:
-				default:
-					pwr |= SET_VCC_VPP(0,0,sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n",
-							__func__,
-							state->Vcc,
-							state->Vpp);
-					break;
-			}
-			break;
-		default: /* what's this ? */
-			pwr |= SET_VCC_VPP(0,0,sock);
-			printk(KERN_ERR "%s: bad Vcc %d\n",
-					__func__, state->Vcc);
-			break;
-	}
-
-	bcsr->pcmcia = pwr;
-	au_sync_delay(300);
-
-	if (sock == 0) {
-		if (!(state->flags & SS_RESET)) {
-			pwr |= BCSR_PCMCIA_PC0DRVEN;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(300);
-			pwr |= BCSR_PCMCIA_PC0RST;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
-		}
-		else {
-			pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN);
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
-		}
-	}
-	else {
-		if (!(state->flags & SS_RESET)) {
-			pwr |= BCSR_PCMCIA_PC1DRVEN;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(300);
-			pwr |= BCSR_PCMCIA_PC1RST;
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
-		}
-		else {
-			pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN);
-			bcsr->pcmcia = pwr;
-			au_sync_delay(100);
-		}
-	}
-	return 0;
-}
-
-/*
- * Enable card status IRQs on (re-)initialisation.  This can
- * be called at initialisation, power management event, or
- * pcmcia event.
- */
-void db1x00_socket_init(struct au1000_pcmcia_socket *skt)
-{
-	/* nothing to do for now */
-}
-
-/*
- * Disable card status IRQs and PCMCIA bus on suspend.
- */
-void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt)
-{
-	/* nothing to do for now */
-}
-
-struct pcmcia_low_level db1x00_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.hw_init 		= db1x00_pcmcia_hw_init,
-	.hw_shutdown		= db1x00_pcmcia_shutdown,
-
-	.socket_state		= db1x00_pcmcia_socket_state,
-	.configure_socket	= db1x00_pcmcia_configure_socket,
-
-	.socket_init		= db1x00_socket_init,
-	.socket_suspend		= db1x00_socket_suspend
-};
-
-int au1x_board_init(struct device *dev)
-{
-	int ret = -ENODEV;
-	bcsr->pcmcia = 0; /* turn off power, if it's not already off */
-	au_sync_delay(2);
-	ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2);
-	return ret;
-}
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
new file mode 100644
index 0000000..7e9c674
--- /dev/null
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -0,0 +1,700 @@
+/*
+ * PCMCIA socket code for the Alchemy Db1xxx/Pb1xxx boards.
+ *
+ * Copyright (c) 2009 Manuel Lauss <manuel.lauss@xxxxxxxxx>
+ *
+ */
+
+/* This is a fairly generic PCMCIA socket driver suitable for the
+ * following Alchemy Development boards:
+ *  Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200.
+ *
+ * The PB1000 is rather ... special... and not yet supported.
+ *
+ * The Db1000 is taken as a reference: Per-socket card, carddetect and
+ *  statuschange IRQs connected to GPIOs, control and status register
+ *  bits arranged in per-socket groups.  All boards listed here use this
+ *  layout, including bit positions and meanings, but with these
+ *  differences:
+ *
+ *	- Pb1100/Pb1500:  single socket only; voltage key bits VS are
+ *			  at STATUS[5:4] (instead of STATUS[1:0]).
+ *	- Au1550-based:   control regs are at different base address.
+ *	- Au1200-based:   control regs are at different base address,
+ *			  additional card-eject irqs, irqs not gpios!
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/cistpl.h>
+
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#include "cs_internal.h"
+
+#define MEM_MAP_SIZE	0x400000
+#define IO_MAP_SIZE	0x1000
+
+struct db1x_pcmcia_sock {
+	struct pcmcia_socket	socket;
+	int		nr;		/* socket number */
+	void		*virt_io;
+
+	/* the "pseudo" addresses of the PCMCIA space. */
+	unsigned long	phys_io;
+	unsigned long	phys_attr;
+	unsigned long	phys_mem;
+
+	/* previous flags for set_socket() */
+	unsigned int old_flags;
+
+	/* interrupt sources.  Real linux irq numbers, NOT the GPIO pins! */
+	int	insert_irq;	/* default carddetect irq */
+	int	stschg_irq;	/* card-status-change irq */
+	int	card_irq;	/* card irq */
+	int	eject_irq;	/* db1200/pb1200 have these */
+
+#define BOARD_TYPE_DEFAULT	0	/* most Db1x boards */
+#define BOARD_TYPE_DB1200	1	/* IRQs aren't gpios */
+#define BOARD_TYPE_PB1100	2	/* VS bits slightly different */
+	int	board_type;
+
+	unsigned long bcsr_base;
+};
+
+#define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket)
+
+/*
+ * card in socket for DB1200/PB1200:  Check CPLD SigStatus register;
+ * bits 10/12 are 1 if a card is in the socket (0/1)
+ */
+static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+	unsigned short sigstat;
+
+	sigstat = au_readw(sock->bcsr_base + 0x30);
+	return sigstat & 1 << (8 + 2 * sock->nr);
+}
+
+/*
+ * Check the carddetect-gpio: if it's low, then there's a card.
+ */
+static int db1000_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+	return !gpio_get_value(irq_to_gpio(sock->insert_irq));
+}
+
+static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+	switch (sock->board_type) {
+	case BOARD_TYPE_DB1200:
+		return db1200_card_inserted(sock);
+	default:
+		return db1000_card_inserted(sock);
+	}
+}
+
+/* STSCHG tends to bounce heavily when cards are inserted/ejected.
+ * To avoid this, the interrupt is normally disabled and only enabled
+ * after reset to a card has been de-asserted.
+ */
+static inline void set_stschg(struct db1x_pcmcia_sock *sock, int en)
+{
+	if (sock->stschg_irq != -1) {
+		if (en)
+			enable_irq(sock->stschg_irq);
+		else
+			disable_irq(sock->stschg_irq);
+	}
+}
+
+static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data)
+{
+	struct db1x_pcmcia_sock *sock = data;
+
+	/* IRQs stay asserted as long as card is present.  Stop the one
+	 * triggering and enable the other.
+	 */
+	if (irq == sock->insert_irq) {
+		disable_irq_nosync(sock->insert_irq);
+		enable_irq(sock->eject_irq);
+	} else {
+		disable_irq_nosync(sock->eject_irq);
+		enable_irq(sock->insert_irq);
+	}
+
+	pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t db1000_pcmcia_cdirq(int irq, void *data)
+{
+	struct db1x_pcmcia_sock *sock = data;
+
+	pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t db1000_pcmcia_stschgirq(int irq, void *data)
+{
+	struct db1x_pcmcia_sock *sock = data;
+
+	pcmcia_parse_events(&sock->socket, SS_STSCHG);
+
+	return IRQ_HANDLED;
+}
+
+static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
+{
+	int ret;
+	unsigned long flags;
+
+	if (sock->stschg_irq != -1) {
+		ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
+				  0, "pcmcia_stschg", sock);
+		if (ret)
+			return ret;
+	}
+
+	/* Db/Pb1200 have separate per-socket insertion and ejection
+	 * interrupts.  The manual says they're supposed to be edge, but
+	 * they show level behaviour.  So kill all interrupts until both
+	 * have been registered since one will always be triggering and
+	 * hang the system.
+	 */
+	if (sock->board_type == BOARD_TYPE_DB1200) {
+		raw_local_irq_save(flags);
+
+		ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
+				  0, "pcmcia_insert", sock);
+		if (ret)
+			goto out1;
+
+		ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
+				  0, "pcmcia_eject", sock);
+		if (ret) {
+			free_irq(sock->insert_irq, sock);
+			raw_local_irq_restore(flags);
+			goto out1;
+		}
+
+		/* disable the currently active one */
+		if (db1200_card_inserted(sock))
+			disable_irq_nosync(sock->insert_irq);
+		else
+			disable_irq_nosync(sock->eject_irq);
+
+		raw_local_irq_restore(flags);
+
+	} else {
+		/* all previous Db1x00 boards use a GPIO to show card
+		 * detection status: neat for both-edge irq type.
+		 */
+		set_irq_type(sock->insert_irq, IRQ_TYPE_EDGE_BOTH);
+		ret = request_irq(sock->insert_irq, db1000_pcmcia_cdirq,
+				  0, "pcmcia_carddetect", sock);
+
+		if (ret)
+			goto out1;
+	}
+
+	return 0;	/* all done */
+
+out1:
+	if (sock->stschg_irq != -1)
+		free_irq(sock->stschg_irq, sock);
+
+	return ret;
+}
+
+static void db1x_pcmcia_free_irqs(struct db1x_pcmcia_sock *sock)
+{
+	if (sock->stschg_irq != -1)
+		free_irq(sock->stschg_irq, sock);
+
+	free_irq(sock->insert_irq, sock);
+	if (sock->eject_irq != -1)
+		free_irq(sock->eject_irq, sock);
+}
+
+/*
+ * configure a PCMCIA socket on the Db1x00 series of boards (and
+ * compatibles).
+ *
+ * 2 external registers are involved:
+ *   pcmcia_status (offset 0x04): bits [0:1/2:3]: read card voltage id
+ *   pcmcia_control(offset 0x10):
+ *	bits[0:1] set vcc for card
+ *	bits[2:3] set vpp for card
+ *	bit 4:	enable data buffers
+ *	bit 7:	reset# for card
+ *	add 8 for second socket.
+ */
+static int db1x_pcmcia_configure(struct pcmcia_socket *skt,
+				 struct socket_state_t *state)
+{
+	struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+	unsigned short cr;
+	unsigned int changed;
+	int v, p, ret;
+
+	/*
+	 * card voltage setup
+	 */
+	cr = au_readw(sock->bcsr_base + 0x10);
+	cr &= ~(0xf << (sock->nr * 8));	/* clear voltage settings */
+	v = p = ret = 0;
+
+	switch (state->Vcc) {
+	case 50: ++v;
+	case 33: ++v;
+	case 0:  break;
+	default:
+		printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n",
+			sock->nr, state->Vcc);
+	}
+
+	switch (state->Vpp) {
+	case 12: ++p;
+	case 33:
+	case 50: ++p;
+	case 0:	break;
+	default:
+		printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n",
+			sock->nr, state->Vpp);
+	}
+
+	/* sanity check: Vpp must be 0, 12, or Vcc */
+	if (((state->Vcc == 33) && (state->Vpp == 50)) ||
+	    ((state->Vcc == 50) && (state->Vpp == 33))) {
+		printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n",
+			sock->nr, state->Vcc, state->Vpp);
+		v = p = 0;
+		ret = -EINVAL;
+	}
+
+	/* create new voltage code */
+	cr |= ((v << 2) | p) << (sock->nr * 8);
+
+	changed = state->flags ^ sock->old_flags;
+
+	if (changed & SS_RESET) {
+		if (state->flags & SS_RESET) {
+			set_stschg(sock, 0);
+			/* assert reset, disable io buffers */
+			cr &= ~(1 << (7 + (sock->nr * 8)));
+			cr &= ~(1 << (4 + (sock->nr * 8)));
+		} else {
+			/* de-assert reset, enable io buffers */
+			cr |= 1 << (7 + (sock->nr * 8));
+			cr |= 1 << (4 + (sock->nr * 8));
+		}
+	}
+
+	au_writew(cr, sock->bcsr_base + 0x10);
+	au_sync();
+
+	sock->old_flags = state->flags;
+
+	/* reset was taken away: give card time to initialize properly */
+	if ((changed & SS_RESET) && !(state->flags & SS_RESET)) {
+		msleep(500);
+		set_stschg(sock, 1);
+	}
+
+	return ret;
+}
+
+/* VCC bits at [3:2]/[11:10] */
+#define GET_VCC(cr, socknr)		\
+	((((cr) >> 2) >> ((socknr) * 8)) & 3)
+
+/* VS bits at [0:1]/[3:2] */
+#define GET_VS(sr, socknr)		\
+	(((sr) >> (2 * (socknr))) & 3)
+
+/* reset bits at [7]/[15] */
+#define GET_RESET(cr, socknr)		\
+	((cr) & (1 << (7 + (8 * (socknr)))))
+
+static int db1x_pcmcia_get_status(struct pcmcia_socket *skt,
+				  unsigned int *value)
+{
+	struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+	unsigned short cr, sr;
+	unsigned int status;
+
+	status = db1x_card_inserted(sock) ? SS_DETECT : 0;
+
+	cr = au_readw(sock->bcsr_base + 0x10);
+	sr = au_readw(sock->bcsr_base + 0x04);
+
+
+	/* PB1100/PB1500: voltage key bits are at [5:4] */
+	if (sock->board_type == BOARD_TYPE_PB1100)
+		sr >>= 4;
+
+	/* determine card type */
+	switch (GET_VS(sr, sock->nr)) {
+	case 0:
+	case 2:
+		status |= SS_3VCARD;	/* 3V card */
+	case 3:
+		break;			/* 5V card: set nothing */
+	default:
+		status |= SS_XVCARD;	/* treated as unsupported in core */
+	}
+
+	/* if Vcc is not zero, we have applied power to a card */
+	status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0;
+
+	/* reset de-asserted? then we're ready */
+	status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET;
+
+	*value = status;
+
+	return 0;
+}
+
+static int db1x_pcmcia_sock_init(struct pcmcia_socket *skt)
+{
+	return 0;
+}
+
+static int db1x_pcmcia_sock_suspend(struct pcmcia_socket *skt)
+{
+	return 0;
+}
+
+static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
+				    struct pccard_io_map *map)
+{
+	struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+
+	map->start = (u32)sock->virt_io;
+	map->stop = map->start + IO_MAP_SIZE;
+
+	return 0;
+}
+
+static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
+				     struct pccard_mem_map *map)
+{
+	struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+
+	if (map->flags & MAP_ATTRIB)
+		map->static_start = sock->phys_attr + map->card_start;
+	else
+		map->static_start = sock->phys_mem + map->card_start;
+
+	return 0;
+}
+
+static struct pccard_operations db1x_pcmcia_operations = {
+	.init			= db1x_pcmcia_sock_init,
+	.suspend		= db1x_pcmcia_sock_suspend,
+	.get_status		= db1x_pcmcia_get_status,
+	.set_socket		= db1x_pcmcia_configure,
+	.set_io_map		= au1x00_pcmcia_set_io_map,
+	.set_mem_map		= au1x00_pcmcia_set_mem_map,
+};
+
+static int __devinit common_pcmcia_probe(struct platform_device *pdev,
+					 int board_type,
+					 unsigned long bcsr_base)
+{
+	struct db1x_pcmcia_sock *sock;
+	struct resource *r;
+	phys_t physio;
+	int ret;
+
+	sock = kzalloc(sizeof(struct db1x_pcmcia_sock), GFP_KERNEL);
+	if (!sock)
+		return -ENOMEM;
+
+	sock->nr = pdev->id;
+	sock->bcsr_base = bcsr_base;
+	sock->board_type = board_type;
+
+	/*
+	 * gather resources necessary and optional nice-to-haved to
+	 * operate a socket.
+	 * This includes IRQs for Carddetection/ejection, the card
+	 *  itself and optional status change detection.
+	 * Also, the memory areas covered by a socket.  For these
+	 *  we require the 32bit "pseudo" addresses (see the au1000.h
+	 *  header for more information).
+	 */
+
+	/* card: irq assigned to the card itself. */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card");
+	sock->card_irq = r ? r->start : 0;
+
+	/* insert: irq which triggers on card insertion/ejection */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert");
+	sock->insert_irq = r ? r->start : -1;
+
+	/* stschg: irq which trigger on card status change (optional) */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg");
+	sock->stschg_irq = r ? r->start : -1;
+
+	/* eject: irq which triggers on ejection (DB1200/PB1200 only) */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "eject");
+	sock->eject_irq = r ? r->start : -1;
+
+	ret = -ENODEV;
+
+	/*
+	 * pseudo-attr:  The 32bit address of the PCMCIA attribute space
+	 * for this socket (usually the 36bit address shifted 4 to the
+	 * right).
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-attr");
+	if (!r) {
+		printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n",
+			sock->nr);
+		goto out0;
+	}
+	sock->phys_attr = r->start;
+
+	/*
+	 * pseudo-mem:  The 32bit address of the PCMCIA memory space for
+	 * this socket (usually the 36bit address shifted 4 to the right)
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-mem");
+	if (!r) {
+		printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n",
+			sock->nr);
+		goto out0;
+	}
+	sock->phys_mem = r->start;
+
+	/*
+	 * pseudo-io:  The 32bit address of the PCMCIA IO space for this
+	 * socket (usually the 36bit address shifted 4 to the right).
+	 */
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-io");
+	if (!r) {
+		printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n",
+			sock->nr);
+		goto out0;
+	}
+	sock->phys_io = r->start;
+
+
+	/* for io must remap the full 36bit address (for reference see
+	 * alchemy/common/setup.c::__fixup_bigphys_addr)
+	 */
+	physio = ((phys_t)sock->phys_io) << 4;
+
+	/*
+	 * PCMCIA client drivers use the inb/outb macros to access
+	 * the IO registers.  Since mips_io_port_base is added
+	 * to the access address of the mips implementation of
+	 * inb/outb, we need to subtract it here because we want
+	 * to access the I/O or MEM address directly, without
+	 * going through this "mips_io_port_base" mechanism.
+	 */
+	sock->virt_io = (void *)(ioremap(physio, IO_MAP_SIZE) -
+				 mips_io_port_base);
+
+	if (!sock->virt_io) {
+		printk(KERN_ERR "pcmcia%d: cannot remap IO area\n",
+			sock->nr);
+		ret = -ENOMEM;
+		goto out0;
+	}
+
+	sock->socket.ops	= &db1x_pcmcia_operations;
+	sock->socket.owner	= THIS_MODULE;
+	sock->socket.pci_irq	= sock->card_irq;
+	sock->socket.features	= SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+	sock->socket.map_size	= MEM_MAP_SIZE;
+	sock->socket.io_offset	= (unsigned long)sock->virt_io;
+	sock->socket.dev.parent	= &pdev->dev;
+	sock->socket.resource_ops = &pccard_static_ops;
+
+	platform_set_drvdata(pdev, sock);
+
+	ret = db1x_pcmcia_setup_irqs(sock);
+	if (ret) {
+		printk(KERN_ERR "pcmcia%d cannot setup interrupts\n",
+			sock->nr);
+		goto out1;
+	}
+
+	set_stschg(sock, 0);
+
+	ret = pcmcia_register_socket(&sock->socket);
+	if (ret) {
+		printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr);
+		goto out2;
+	}
+
+	printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %08lx"
+		"(%p) %08lx %08lx  card/insert/stschg/eject irqs @ %d "
+		"%d %d %d\n", sock->nr, sock->phys_io, sock->virt_io,
+		sock->phys_attr, sock->phys_mem, sock->card_irq,
+		sock->insert_irq, sock->stschg_irq, sock->eject_irq);
+
+	return 0;
+
+out2:
+	db1x_pcmcia_free_irqs(sock);
+out1:
+	iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+out0:
+	kfree(sock);
+	return ret;
+}
+
+/* Db1000, Db1500, Db1100 */
+static int __devinit db1000_pcmcia_socket_probe(struct platform_device *pdev)
+{
+	return common_pcmcia_probe(pdev, BOARD_TYPE_DEFAULT, 0xAE000000);
+}
+
+/* Db1550/Pb1550: like the Db1000, only different bscr_base */
+static int __devinit pb1550_pcmcia_socket_probe(struct platform_device *pdev)
+{
+	return common_pcmcia_probe(pdev, BOARD_TYPE_DEFAULT, 0xAF000000);
+}
+
+/* Pb1200/Db1200 */
+static int __devinit pb1200_pcmcia_socket_probe(struct platform_device *pdev)
+{
+	return common_pcmcia_probe(pdev, BOARD_TYPE_DB1200, 0xB9800000);
+}
+
+/* Pb1100/Pb1500 */
+static int __devinit pb1100_pcmcia_socket_probe(struct platform_device *pdev)
+{
+	return common_pcmcia_probe(pdev, BOARD_TYPE_PB1100, 0xAE000000);
+}
+
+static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev)
+{
+	struct db1x_pcmcia_sock *sock = platform_get_drvdata(pdev);
+
+	pcmcia_unregister_socket(&sock->socket);
+	db1x_pcmcia_free_irqs(sock);
+	iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+	kfree(sock);
+
+	return 0;
+}
+
+static int db1x_pcmcia_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	return pcmcia_socket_dev_suspend(&pdev->dev, state);
+}
+
+static int db1x_pcmcia_resume(struct platform_device *pdev)
+{
+	return pcmcia_socket_dev_resume(&pdev->dev);
+}
+
+static struct platform_driver db1x_pcmcia_socket_driver = {
+	.driver	= {
+		.name	= "db1x00_pcmcia",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= db1000_pcmcia_socket_probe,
+	.remove		= __devexit_p(db1x_pcmcia_socket_remove),
+	.suspend	= db1x_pcmcia_suspend,
+	.resume		= db1x_pcmcia_resume,
+};
+
+static struct platform_driver pb1200_pcmcia_socket_driver = {
+	.driver	= {
+		.name	= "pb1200_pcmcia",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pb1200_pcmcia_socket_probe,
+	.remove		= __devexit_p(db1x_pcmcia_socket_remove),
+	.suspend	= db1x_pcmcia_suspend,
+	.resume		= db1x_pcmcia_resume,
+};
+
+static struct platform_driver pb1100_pcmcia_socket_driver = {
+	.driver	= {
+		.name	= "pb1100_pcmcia",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pb1100_pcmcia_socket_probe,
+	.remove		= __devexit_p(db1x_pcmcia_socket_remove),
+	.suspend	= db1x_pcmcia_suspend,
+	.resume		= db1x_pcmcia_resume,
+};
+
+static struct platform_driver pb1550_pcmcia_socket_driver = {
+	.driver	= {
+		.name	= "pb1550_pcmcia",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pb1550_pcmcia_socket_probe,
+	.remove		= __devexit_p(db1x_pcmcia_socket_remove),
+	.suspend	= db1x_pcmcia_suspend,
+	.resume		= db1x_pcmcia_resume,
+};
+
+int __init db1x_pcmcia_socket_load(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&db1x_pcmcia_socket_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&pb1200_pcmcia_socket_driver);
+	if (ret) {
+		platform_driver_unregister(&db1x_pcmcia_socket_driver);
+		return ret;
+	}
+	ret = platform_driver_register(&pb1100_pcmcia_socket_driver);
+	if (ret) {
+		platform_driver_unregister(&pb1200_pcmcia_socket_driver);
+		platform_driver_unregister(&db1x_pcmcia_socket_driver);
+		return ret;
+	}
+	ret = platform_driver_register(&pb1550_pcmcia_socket_driver);
+	if (ret) {
+		platform_driver_unregister(&pb1100_pcmcia_socket_driver);
+		platform_driver_unregister(&pb1200_pcmcia_socket_driver);
+		platform_driver_unregister(&db1x_pcmcia_socket_driver);
+		return ret;
+	}
+
+	return ret;
+}
+
+void  __exit db1x_pcmcia_socket_unload(void)
+{
+	platform_driver_unregister(&db1x_pcmcia_socket_driver);
+	platform_driver_unregister(&pb1200_pcmcia_socket_driver);
+	platform_driver_unregister(&pb1100_pcmcia_socket_driver);
+	platform_driver_unregister(&pb1550_pcmcia_socket_driver);
+}
+
+module_init(db1x_pcmcia_socket_load);
+module_exit(db1x_pcmcia_socket_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db1x00 boards\n");
+MODULE_AUTHOR("Manuel Lauss");
-- 
1.6.3.1



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux