Adds the C and header source files for the Cisco PowerTV platform.
Thanks to David Daney and, especially, to Paul Gortmaker for their comments.
History
v3 Added ioremap.h file. Removed usage of MIPS_MT as it doesn't apply
to the 24K processor. Support PowerTV-specific 48-bit clocksource.
Moved CEVT_POWERTV and CSRC_POWERTV to arch/mips/powertv/Kconfig from
arch/mips/Kconfig. Split out ASIC- and model-dependent files. Many,
many style changes to conform to kernel code style.
v2 Check clocksource function to correspond to changed prototype.
v1 First release
Signed-off-by: David VomLehn <dvomlehn@xxxxxxxxx>
---
arch/mips/include/asm/mach-powertv/asic.h | 109 +++
arch/mips/include/asm/mach-powertv/asic_regs.h | 146 ++++
arch/mips/include/asm/mach-powertv/dma-coherence.h | 124 ++++
arch/mips/include/asm/mach-powertv/interrupts.h | 253 +++++++
arch/mips/include/asm/mach-powertv/ioremap.h | 92 +++
arch/mips/include/asm/mach-powertv/war.h | 28 +
arch/mips/powertv/Kconfig | 33 +
arch/mips/powertv/Makefile | 40 ++
arch/mips/powertv/asic/Kconfig | 28 +
arch/mips/powertv/asic/Makefile | 35 +
arch/mips/powertv/asic/asic-calliope.c | 99 +++
arch/mips/powertv/asic/asic-cronus.c | 99 +++
arch/mips/powertv/asic/asic-zeus.c | 99 +++
arch/mips/powertv/asic/asic_devices.c | 713 ++++++++++++++++++++
arch/mips/powertv/asic/asic_int.c | 125 ++++
arch/mips/powertv/asic/irq_asic.c | 116 ++++
arch/mips/powertv/asic/prealloc-calliope.c | 642 ++++++++++++++++++
arch/mips/powertv/asic/prealloc-cronus.c | 625 +++++++++++++++++
arch/mips/powertv/asic/prealloc-cronuslite.c | 298 ++++++++
arch/mips/powertv/asic/prealloc-zeus.c | 471 +++++++++++++
arch/mips/powertv/cevt-powertv.c | 165 +++++
arch/mips/powertv/cmdline.c | 52 ++
arch/mips/powertv/csrc-powertv.c | 180 +++++
arch/mips/powertv/init.c | 128 ++++
arch/mips/powertv/init.h | 30 +
arch/mips/powertv/memory.c | 184 +++++
arch/mips/powertv/pci/Makefile | 28 +
arch/mips/powertv/pci/fixup-powertv.c | 36 +
arch/mips/powertv/pci/powertv-pci.h | 31 +
arch/mips/powertv/powertv-clock.h | 30 +
arch/mips/powertv/powertv_setup.c | 351 ++++++++++
arch/mips/powertv/reset.c | 70 ++
arch/mips/powertv/reset.h | 28 +
arch/mips/powertv/time.c | 30 +
34 files changed, 5518 insertions(+), 0 deletions(-)
diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h
new file mode 100644
index 0000000..fd02c4d
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/asic.h
@@ -0,0 +1,109 @@
+/*
+ * asic.h
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _ASM_MACH_POWERTV_ASIC_H
+#define _ASM_MACH_POWERTV_ASIC_H
+
+#include <linux/ioport.h>
+#include <asm/mach-powertv/asic_regs.h>
+
+#define DVR_CAPABLE (1<<0)
+#define PCIE_CAPABLE (1<<1)
+#define FFS_CAPABLE (1<<2)
+#define DISPLAY_CAPABLE (1<<3)
+
+/* Platform Family types
+ * For compitability, the new value must be added in the end */
+enum family_type {
+ FAMILY_8500,
+ FAMILY_8500RNG,
+ FAMILY_4500,
+ FAMILY_1500,
+ FAMILY_8600,
+ FAMILY_4600,
+ FAMILY_4600VZA,
+ FAMILY_8600VZB,
+ FAMILY_1500VZE,
+ FAMILY_1500VZF,
+ FAMILIES
+};
+
+/* Register maps for each ASIC */
+extern const struct register_map calliope_register_map;
+extern const struct register_map cronus_register_map;
+extern const struct register_map zeus_register_map;
+
+extern struct resource dvr_cronus_resources[];
+extern struct resource dvr_zeus_resources[];
+extern struct resource non_dvr_calliope_resources[];
+extern struct resource non_dvr_cronus_resources[];
+extern struct resource non_dvr_cronuslite_resources[];
+extern struct resource non_dvr_vz_calliope_resources[];
+extern struct resource non_dvr_vze_calliope_resources[];
+extern struct resource non_dvr_vzf_calliope_resources[];
+extern struct resource non_dvr_zeus_resources[];
+
+extern void powertv_platform_init(void);
+extern void platform_alloc_bootmem(void);
+extern enum asic_type platform_get_asic(void);
+extern enum family_type platform_get_family(void);
+extern int platform_supports_dvr(void);
+extern int platform_supports_ffs(void);
+extern int platform_supports_pcie(void);
+extern int platform_supports_display(void);
+extern void configure_platform(void);
+extern void platform_configure_usb_ehci(void);
+extern void platform_unconfigure_usb_ehci(void);
+extern void platform_configure_usb_ohci(void);
+extern void platform_unconfigure_usb_ohci(void);
+
+/* Platform Resources */
+#define ASIC_RESOURCE_GET_EXISTS 1
+extern struct resource *asic_resource_get(const char *name);
+extern void platform_release_memory(void *baddr, int size);
+
+/* Reboot Cause */
+extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
+extern void set_locked_reboot_cause(char code, unsigned int data,
+ unsigned int data2);
+
+enum sys_reboot_type {
+ sys_unknown_reboot = 0x00, /* Unknown reboot cause */
+ sys_davic_change = 0x01, /* Reboot due to change in DAVIC
+ * mode */
+ sys_user_reboot = 0x02, /* Reboot initiated by user */
+ sys_system_reboot = 0x03, /* Reboot initiated by OS */
+ sys_trap_reboot = 0x04, /* Reboot due to a CPU trap */
+ sys_silent_reboot = 0x05, /* Silent reboot */
+ sys_boot_ldr_reboot = 0x06, /* Bootloader reboot */
+ sys_power_up_reboot = 0x07, /* Power on bootup. Older
+ * drivers may report as
+ * userReboot. */
+ sys_code_change = 0x08, /* Reboot to take code change.
+ * Older drivers may report as
+ * userReboot. */
+ sys_hardware_reset = 0x09, /* HW watchdog or front-panel
+ * reset button reset. Older
+ * drivers may report as
+ * userReboot. */
+ sys_watchdogInterrupt = 0x0A /* Pre-watchdog interrupt */
+};
+
+#endif /* _ASM_MACH_POWERTV_ASIC_H */
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
new file mode 100644
index 0000000..32e7391
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/asic_regs.h
@@ -0,0 +1,146 @@
+/*
+ * asic_regs.h
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __ASM_MACH_POWERTV_ASIC_H_
+#define __ASM_MACH_POWERTV_ASIC_H_
+#include <linux/io.h>
+
+/* ASIC types */
+enum asic_type {
+ ASIC_UNKNOWN,
+ ASIC_ZEUS,
+ ASIC_CALLIOPE,
+ ASIC_CRONUS,
+ ASIC_CRONUSLITE,
+ ASICS
+};
+
+/* hardcoded values read from Chip Version registers */
+#define CRONUS_10 0x0B4C1C20
+#define CRONUS_11 0x0B4C1C21
+#define CRONUSLITE_10 0x0B4C1C40
+
+#define NAND_FLASH_BASE 0x03000000
+#define ZEUS_IO_BASE 0x09000000
+#define CALLIOPE_IO_BASE 0x08000000
+#define CRONUS_IO_BASE 0x09000000
+#define ASIC_IO_SIZE 0x01000000
+
+/* ASIC register enumeration */
+struct register_map {
+ u32 eic_slow0_strt_add;
+ u32 eic_cfg_bits;
+ u32 eic_ready_status;
+
+ u32 chipver3;
+ u32 chipver2;
+ u32 chipver1;
+ u32 chipver0;
+
+ u32 uart1_intstat;
+ u32 uart1_inten;
+ u32 uart1_config1;
+ u32 uart1_config2;
+ u32 uart1_divisorhi;
+ u32 uart1_divisorlo;
+ u32 uart1_data;
+ u32 uart1_status;
+
+ u32 int_stat_3;
+ u32 int_stat_2;
+ u32 int_stat_1;
+ u32 int_stat_0;
+ u32 int_config;
+ u32 int_int_scan;
+ u32 ien_int_3;
+ u32 ien_int_2;
+ u32 ien_int_1;
+ u32 ien_int_0;
+ u32 int_level_3_3;
+ u32 int_level_3_2;
+ u32 int_level_3_1;
+ u32 int_level_3_0;
+ u32 int_level_2_3;
+ u32 int_level_2_2;
+ u32 int_level_2_1;
+ u32 int_level_2_0;
+ u32 int_level_1_3;
+ u32 int_level_1_2;
+ u32 int_level_1_1;
+ u32 int_level_1_0;
+ u32 int_level_0_3;
+ u32 int_level_0_2;
+ u32 int_level_0_1;
+ u32 int_level_0_0;
+ u32 int_docsis_en;
+
+ u32 mips_pll_setup;
+ u32 usb_fs;
+ u32 test_bus;
+ u32 usb2_ohci_int_mask;
+ u32 usb2_strap;
+ u32 ehci_hcapbase;
+ u32 ohci_hc_revision;
+ u32 bcm1_bs_lmi_steer;
+ u32 usb2_control;
+ u32 usb2_stbus_obc;
+ u32 usb2_stbus_mess_size;
+ u32 usb2_stbus_chunk_size;
+
+ u32 pcie_regs;
+ u32 tim_ch;
+ u32 tim_cl;
+ u32 gpio_dout;
+ u32 gpio_din;
+ u32 gpio_dir;
+ u32 watchdog;
+ u32 front_panel;
+
+ u32 register_maps;
+};
+
+extern enum asic_type asic;
+extern const struct register_map *register_map;
+extern unsigned long asic_phy_base; /* Physical address of ASIC */
+extern unsigned long asic_base; /* Virtual address of ASIC */
+
+/*
+ * Macros to interface to registers through their ioremapped address
+ * asic_reg_offset Returns the offset of a given register from the start
+ * of the ASIC address space
+ * asic_reg_phys_addr Returns the physical address of the given register
+ * asic_reg_addr Returns the iomapped virtual address of the given
+ * register.
+ */
+#define asic_reg_offset(x) (register_map->x)
+#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x))
+#define asic_reg_addr(x) \
+ ((unsigned int *) (asic_base + asic_reg_offset(x)))
+
+/*
+ * The asic_reg macro is gone. It should be replaced by either asic_read or
+ * asic_write, as appropriate.
+ */
+
+#define asic_read(x) readl(asic_reg_addr(x))
+#define asic_write(v, x) writel(v, asic_reg_addr(x))
+
+extern void asic_irq_init(void);
+#endif
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
new file mode 100644
index 0000000..da31ffb
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h
@@ -0,0 +1,124 @@
+/*
+ * dma-coherence.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Version from mach-generic modified to support PowerTV port
+ * Portions Copyright (C) 2009 Cisco Systems, Inc.
+ * Copyright (C) 2006 Ralf Baechle <ralf@xxxxxxxxxxxxxx>
+ *
+ */
+
+#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H
+#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
+
+#include <linux/sched.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <asm/mach-powertv/asic.h>
+
+static inline bool is_kseg2(void *addr)
+{
+ return (unsigned long)addr >= KSEG2;
+}
+
+static inline unsigned long virt_to_phys_from_pte(void *addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *ptep, pte;
+
+ unsigned long virt_addr = (unsigned long)addr;
+ unsigned long phys_addr = 0UL;
+
+ /* get the page global directory. */
+ pgd = pgd_offset_k(virt_addr);
+
+ if (!pgd_none(*pgd)) {
+ /* get the page upper directory */
+ pud = pud_offset(pgd, virt_addr);
+ if (!pud_none(*pud)) {
+ /* get the page middle directory */
+ pmd = pmd_offset(pud, virt_addr);
+ if (!pmd_none(*pmd)) {
+ /* get a pointer to the page table entry */
+ ptep = pte_offset(pmd, virt_addr);
+ pte = *ptep;
+ /* check for a valid page */
+ if (pte_present(pte)) {
+ /* get the physical address the page is
+ * refering to */
+ phys_addr = (unsigned long)
+ page_to_phys(pte_page(pte));
+ /* add the offset within the page */
+ phys_addr |= (virt_addr & ~PAGE_MASK);
+ }
+ }
+ }
+ }
+
+ return phys_addr;
+}
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+ size_t size)
+{
+ if (is_kseg2(addr))
+ return phys_to_bus(virt_to_phys_from_pte(addr));
+ else
+ return phys_to_bus(virt_to_phys(addr));
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+ struct page *page)
+{
+ return phys_to_bus(page_to_phys(page));
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+ return bus_to_phys(dma_addr);
+}
+
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+ /*
+ * we fall back to GFP_DMA when the mask isn't all 1s,
+ * so we can't guarantee allocations that must be
+ * within a tighter range than GFP_DMA..
+ */
+ if (mask < DMA_BIT_MASK(24))
+ return 0;
+
+ return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+ return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+ dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+#ifdef CONFIG_DMA_COHERENT
+ return 1;
+#endif
+#ifdef CONFIG_DMA_NONCOHERENT
+ return 0;
+#endif
+}
+
+#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h
new file mode 100644
index 0000000..e5a92d1
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/interrupts.h
@@ -0,0 +1,253 @@
+/*
+ * interrupts.h
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_
+#define _ASM_MACH_POWERTV_INTERRUPTS_H_
+
+/*
+ * Defines for all of the interrupt lines
+ */
+
+#define ibase 0
+
+/*------------- Register: int_stat_3 */
+/* 126 unused (bit 31) */
+#define irq_asc2video (ibase+126) /* ASC 2 Video Interrupt */
+#define irq_asc1video (ibase+125) /* ASC 1 Video Interrupt */
+#define irq_comms_block_wd (ibase+124) /* ASC 1 Video Interrupt */
+#define irq_fdma_mailbox (ibase+123) /* FDMA Mailbox Output */
+#define irq_fdma_gp (ibase+122) /* FDMA GP Output */
+#define irq_mips_pic (ibase+121) /* MIPS Performance Counter
+ * Interrupt */
+#define irq_mips_timer (ibase+120) /* MIPS Timer Interrupt */
+#define irq_memory_protect (ibase+119) /* Memory Protection Interrupt
+ * -- Ored by glue logic inside
+ * SPARC ILC (see
+ * INT_MEM_PROT_STAT, below,
+ * for individual interrupts)
+ */
+/* 118 unused (bit 22) */
+#define irq_sbag (ibase+117) /* SBAG Interrupt -- Ored by
+ * glue logic inside SPARC ILC
+ * (see INT_SBAG_STAT, below,
+ * for individual interrupts) */
+#define irq_qam_b_fec (ibase+116) /* QAM B FEC Interrupt */
+#define irq_qam_a_fec (ibase+115) /* QAM A FEC Interrupt */
+/* 114 unused (bit 18) */
+#define irq_mailbox (ibase+113) /* Mailbox Debug Interrupt --
+ * Ored by glue logic inside
+ * SPARC ILC (see
+ * INT_MAILBOX_STAT, below, for
+ * individual interrupts) */
+#define irq_fuse_stat1 (ibase+112) /* Fuse Status 1 */
+#define irq_fuse_stat2 (ibase+111) /* Fuse Status 2 */
+#define irq_fuse_stat3 (ibase+110) /* Blitter Interrupt / Fuse
+ * Status 3 */
+#define irq_blitter (ibase+110) /* Blitter Interrupt / Fuse
+ * Status 3 */
+#define irq_avc1_pp0 (ibase+109) /* AVC Decoder #1 PP0
+ * Interrupt */
+#define irq_avc1_pp1 (ibase+108) /* AVC Decoder #1 PP1
+ * Interrupt */
+#define irq_avc1_mbe (ibase+107) /* AVC Decoder #1 MBE
+ * Interrupt */
+#define irq_avc2_pp0 (ibase+106) /* AVC Decoder #2 PP0
+ * Interrupt */
+#define irq_avc2_pp1 (ibase+105) /* AVC Decoder #2 PP1
+ * Interrupt */
+#define irq_avc2_mbe (ibase+104) /* AVC Decoder #2 MBE
+ * Interrupt */
+#define irq_zbug_spi (ibase+103) /* Zbug SPI Slave Interrupt */
+#define irq_qam_mod2 (ibase+102) /* QAM Modulator 2 DMA
+ * Interrupt */
+#define irq_ir_rx (ibase+101) /* IR RX 2 Interrupt */
+#define irq_aud_dsp2 (ibase+100) /* Audio DSP #2 Interrupt */
+#define irq_aud_dsp1 (ibase+99) /* Audio DSP #1 Interrupt */
+#define irq_docsis (ibase+98) /* DOCSIS Debug Interrupt */
+#define irq_sd_dvp1 (ibase+97) /* SD DVP #1 Interrupt */
+#define irq_sd_dvp2 (ibase+96) /* SD DVP #2 Interrupt */
+/*------------- Register: int_stat_2 */
+#define irq_hd_dvp (ibase+95) /* HD DVP Interrupt */
+#define kIrq_Prewatchdog (ibase+94) /* watchdog Pre-Interrupt */
+#define irq_timer2 (ibase+93) /* Programmable Timer
+ * Interrupt 2 */
+#define irq_1394 (ibase+92) /* 1394 Firewire Interrupt */
+#define irq_usbohci (ibase+91) /* USB 2.0 OHCI Interrupt */
+#define irq_usbehci (ibase+90) /* USB 2.0 EHCI Interrupt */
+#define irq_pciexp (ibase+89) /* PCI Express 0 Interrupt */
+#define irq_pciexp0 (ibase+89) /* PCI Express 0 Interrupt */
+#define irq_afe1 (ibase+88) /* AFE 1 Interrupt */
+#define irq_sata (ibase+87) /* SATA 1 Interrupt */
+#define irq_sata1 (ibase+87) /* SATA 1 Interrupt */
+#define irq_dtcp (ibase+86) /* DTCP Interrupt */
+#define irq_pciexp1 (ibase+85) /* PCI Express 1 Interrupt */
+/* 84 unused (bit 20) */
+/* 83 unused (bit 19) */
+/* 82 unused (bit 18) */
+#define irq_sata2 (ibase+81) /* SATA2 Interrupt */
+#define irq_uart2 (ibase+80) /* UART2 Interrupt */
+#define irq_legacy_usb (ibase+79) /* Legacy USB Host ISR (1.1
+ * Host module) */
+#define irq_pod (ibase+78) /* POD Interrupt */
+#define irq_slave_usb (ibase+77) /* Slave USB */
+#define irq_denc1 (ibase+76) /* DENC #1 VTG Interrupt */
+#define irq_vbi_vtg (ibase+75) /* VBI VTG Interrupt */
+#define irq_afe2 (ibase+74) /* AFE 2 Interrupt */
+#define irq_denc2 (ibase+73) /* DENC #2 VTG Interrupt */
+#define irq_asc2 (ibase+72) /* ASC #2 Interrupt */
+#define irq_asc1 (ibase+71) /* ASC #1 Interrupt */
+#define irq_mod_dma (ibase+70) /* Modulator DMA Interrupt */
+#define irq_byte_eng1 (ibase+69) /* Byte Engine Interrupt [1] */
+#define irq_byte_eng0 (ibase+68) /* Byte Engine Interrupt [0] */
+/* 67 unused (bit 03) */
+/* 66 unused (bit 02) */
+/* 65 unused (bit 01) */
+/* 64 unused (bit 00) */
+/*------------- Register: int_stat_1 */
+/* 63 unused (bit 31) */
+/* 62 unused (bit 30) */
+/* 61 unused (bit 29) */
+/* 60 unused (bit 28) */
+/* 59 unused (bit 27) */
+/* 58 unused (bit 26) */
+/* 57 unused (bit 25) */
+/* 56 unused (bit 24) */
+#define irq_buf_dma_mem2mem (ibase+55) /* BufDMA Memory to Memory
+ * Interrupt */
+#define irq_buf_dma_usbtransmit (ibase+54) /* BufDMA USB Transmit
+ * Interrupt */
+#define irq_buf_dma_qpskpodtransmit (ibase+53) /* BufDMA QPSK/POD Tramsit
+ * Interrupt */
+#define irq_buf_dma_transmit_error (ibase+52) /* BufDMA Transmit Error
+ * Interrupt */
+#define irq_buf_dma_usbrecv (ibase+51) /* BufDMA USB Receive
+ * Interrupt */
+#define irq_buf_dma_qpskpodrecv (ibase+50) /* BufDMA QPSK/POD Receive
+ * Interrupt */
+#define irq_buf_dma_recv_error (ibase+49) /* BufDMA Receive Error
+ * Interrupt */
+#define irq_qamdma_transmit_play (ibase+48) /* QAMDMA Transmit/Play
+ * Interrupt */
+#define irq_qamdma_transmit_error (ibase+47) /* QAMDMA Transmit Error
+ * Interrupt */
+#define irq_qamdma_recv2high (ibase+46) /* QAMDMA Receive 2 High
+ * (Chans 63-32) */
+#define irq_qamdma_recv2low (ibase+45) /* QAMDMA Receive 2 Low
+ * (Chans 31-0) */
+#define irq_qamdma_recv1high (ibase+44) /* QAMDMA Receive 1 High
+ * (Chans 63-32) */
+#define irq_qamdma_recv1low (ibase+43) /* QAMDMA Receive 1 Low
+ * (Chans 31-0) */
+#define irq_qamdma_recv_error (ibase+42) /* QAMDMA Receive Error
+ * Interrupt */
+#define irq_mpegsplice (ibase+41) /* MPEG Splice Interrupt */
+#define irq_deinterlace_rdy (ibase+40) /* Deinterlacer Frame Ready
+ * Interrupt */
+#define irq_ext_in0 (ibase+39) /* External Interrupt irq_in0 */
+#define irq_gpio3 (ibase+38) /* GP I/O IRQ 3 - From GP I/O
+ * Module */
+#define irq_gpio2 (ibase+37) /* GP I/O IRQ 2 - From GP I/O
+ * Module (ABE_intN) */
+#define irq_pcrcmplt1 (ibase+36) /* PCR Capture Complete or
+ * Discontinuity 1 */
+#define irq_pcrcmplt2 (ibase+35) /* PCR Capture Complete or
+ * Discontinuity 2 */
+#define irq_parse_peierr (ibase+34) /* PID Parser Error Detect
+ * (PEI) */
+#define irq_parse_cont_err (ibase+33) /* PID Parser continuity error
+ * detect */
+#define irq_ds1framer (ibase+32) /* DS1 Framer Interrupt */
+/*------------- Register: int_stat_0 */
+#define irq_gpio1 (ibase+31) /* GP I/O IRQ 1 - From GP I/O
+ * Module */
+#define irq_gpio0 (ibase+30) /* GP I/O IRQ 0 - From GP I/O
+ * Module */
+#define irq_qpsk_out_aloha (ibase+29) /* QPSK Output Slotted Aloha
+ * (chan 3) Transmission
+ * Completed OK */
+#define irq_qpsk_out_tdma (ibase+28) /* QPSK Output TDMA (chan 2)
+ * Transmission Completed OK */
+#define irq_qpsk_out_reserve (ibase+27) /* QPSK Output Reservation
+ * (chan 1) Transmission
+ * Completed OK */
+#define irq_qpsk_out_aloha_err (ibase+26) /* QPSK Output Slotted Aloha
+ * (chan 3)Transmission
+ * completed with Errors. */
+#define irq_qpsk_out_tdma_err (ibase+25) /* QPSK Output TDMA (chan 2)
+ * Transmission completed with
+ * Errors. */
+#define irq_qpsk_out_rsrv_err (ibase+24) /* QPSK Output Reservation
+ * (chan 1) Transmission
+ * completed with Errors */
+#define irq_aloha_fail (ibase+23) /* Unsuccessful Resend of Aloha
+ * for N times. Aloha retry
+ * timeout for channel 3. */
+#define irq_timer1 (ibase+22) /* Programmable Timer
+ * Interrupt */
+#define irq_keyboard (ibase+21) /* Keyboard Module Interrupt */
+#define irq_i2c (ibase+20) /* I2C Module Interrupt */
+#define irq_spi (ibase+19) /* SPI Module Interrupt */
+#define irq_irblaster (ibase+18) /* IR Blaster Interrupt */
+#define irq_splice_detect (ibase+17) /* PID Key Change Interrupt or
+ * Splice Detect Interrupt */
+#define irq_se_micro (ibase+16) /* Secure Micro I/F Module
+ * Interrupt */
+#define irq_uart1 (ibase+15) /* UART Interrupt */
+#define irq_irrecv (ibase+14) /* IR Receiver Interrupt */
+#define irq_host_int1 (ibase+13) /* Host-to-Host Interrupt 1 */
+#define irq_host_int0 (ibase+12) /* Host-to-Host Interrupt 0 */
+#define irq_qpsk_hecerr (ibase+11) /* QPSK HEC Error Interrupt */
+#define irq_qpsk_crcerr (ibase+10) /* QPSK AAL-5 CRC Error
+ * Interrupt */
+/* 9 unused (bit 09) */
+/* 8 unused (bit 08) */
+#define irq_psicrcerr (ibase+7) /* QAM PSI CRC Error
+ * Interrupt */
+#define irq_psilength_err (ibase+6) /* QAM PSI Length Error
+ * Interrupt */
+#define irq_esfforward (ibase+5) /* ESF Interrupt Mark From
+ * Forward Path Reference -
+ * every 3ms when forward Mbits
+ * and forward slot control
+ * bytes are updated. */
+#define irq_esfreverse (ibase+4) /* ESF Interrupt Mark from
+ * Reverse Path Reference -
+ * delayed from forward mark by
+ * the ranging delay plus a
+ * fixed amount. When reverse
+ * Mbits and reverse slot
+ * control bytes are updated.
+ * Occurs every 3ms for 3.0M and
+ * 1.554 M upstream rates and
+ * every 6 ms for 256K upstream
+ * rate. */
+#define irq_aloha_timeout (ibase+3) /* Slotted-Aloha timeout on
+ * Channel 1. */
+#define irq_reservation (ibase+2) /* Partial (or Incremental)
+ * Reservation Message Completed
+ * or Slotted aloha verify for
+ * channel 1. */
+#define irq_aloha3 (ibase+1) /* Slotted-Aloha Message Verify
+ * Interrupt or Reservation
+ * increment completed for
+ * channel 3. */
+#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */
+#endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */
+
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
new file mode 100644
index 0000000..1d3be37
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/ioremap.h
@@ -0,0 +1,92 @@
+/*
+ * ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Portions Copyright (C) Cisco Systems, Inc.
+ */
+#ifndef __ASM_MACH_POWERTV_IOREMAP_H
+#define __ASM_MACH_POWERTV_IOREMAP_H
+
+#include <linux/types.h>
+
+#define LOW_MEM_BOUNDARY_PHYS 0x20000000
+#define LOW_MEM_BOUNDARY_MASK (~(LOW_MEM_BOUNDARY_PHYS - 1))
+
+/*
+ * The bus addresses are different than the physical addresses that
+ * the processor sees by an offset. This offset varies by ASIC
+ * version. Define a variable to hold the offset and some macros to
+ * make the conversion simpler. */
+extern unsigned long phys_to_bus_offset;
+
+#ifdef CONFIG_HIGHMEM
+#define MEM_GAP_PHYS 0x60000000
+/*
+ * TODO: We will use the hard code for conversion between physical and
+ * bus until the bootloader releases their device tree to us.
+ */
+#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \
+ ((x) + phys_to_bus_offset) : (x))
+#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \
+ ((x) - phys_to_bus_offset) : (x))
+#else
+#define phys_to_bus(x) ((x) + phys_to_bus_offset)
+#define bus_to_phys(x) ((x) - phys_to_bus_offset)
+#endif
+
+/*
+ * Determine whether the address we are given is for an ASIC device
+ * Params: addr Address to check
+ * Returns: Zero if the address is not for ASIC devices, non-zero
+ * if it is.
+ */
+static inline int asic_is_device_addr(phys_t addr)
+{
+ return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK);
+}
+
+/*
+ * Determine whether the address we are given is external RAM mappable
+ * into KSEG1.
+ * Params: addr Address to check
+ * Returns: Zero if the address is not for external RAM and
+ */
+static inline int asic_is_lowmem_ram_addr(phys_t addr)
+{
+ /*
+ * The RAM always starts at the following address in the processor's
+ * physical address space
+ */
+ static const phys_t phys_ram_base = 0x10000000;
+ phys_t bus_ram_base;
+
+ bus_ram_base = phys_to_bus_offset + phys_ram_base;
+
+ return addr >= bus_ram_base &&
+ addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base));
+}
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+ unsigned long flags)
+{
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return 0;
+}
+#endif /* __ASM_MACH_POWERTV_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-powertv/war.h b/arch/mips/include/asm/mach-powertv/war.h
new file mode 100644
index 0000000..7ac05ec
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/war.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This version for the PowerTV platform copied from the Malta version.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@xxxxxxxxxxxxxx>
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ */
+#ifndef __ASM_MACH_POWERTV_WAR_H
+#define __ASM_MACH_POWERTV_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 1
+#define MIPS_CACHE_SYNC_WAR 1
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MACH_POWERTV_WAR_H */
diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig
new file mode 100644
index 0000000..fc9171e
--- /dev/null
+++ b/arch/mips/powertv/Kconfig
@@ -0,0 +1,33 @@
+source "arch/mips/powertv/asic/Kconfig"
+
+config BOOTLOADER_DRIVER
+ bool "PowerTV Bootloader Driver Support"
+ default n
+ depends on POWERTV
+ help
+ Use this option if you want to load bootloader driver.
+
+config BOOTLOADER_FAMILY
+ string "POWERTV Bootloader Family string"
+ default "85"
+ depends on POWERTV && !BOOTLOADER_DRIVER
+ help
+ This value should be specified when the bootloader driver is disabled
+ and must be exactly two characters long. Families supported are:
+ R1 - RNG-100 R2 - RNG-200
+ A1 - Class A B1 - Class B
+ E1 - Class E F1 - Class F
+ 44 - 45xx 46 - 46xx
+ 85 - 85xx 86 - 86xx
+
+#
+# Flag for POWERTV clock source.
+#
+config CEVT_POWERTV
+ bool
+
+#
+# Flag for POWERTV clock event.
+#
+config CSRC_POWERTV
+ bool
diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile
new file mode 100644
index 0000000..145d065
--- /dev/null
+++ b/arch/mips/powertv/Makefile
@@ -0,0 +1,40 @@
+#
+# Carsten Langgaard, carstenl@xxxxxxxx
+# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+#
+# Carsten Langgaard, carstenl@xxxxxxxx
+# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+# Portions copyright (C) 2009 Cisco Systems, Inc.
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# Makefile for the Cisco PowerTV-specific kernel interface routines
+# under Linux.
+#
+
+EXTRA_CFLAGS += -Wall -Werror
+
+obj-y :=
+
+obj-$(CONFIG_POWERTV) += cmdline.o \
+ init.o \
+ memory.o \
+ reset.o \
+ time.o \
+ powertv_setup.o \
+ asic/ \
+ pci/
+
+obj-$(CONFIG_CEVT_POWERTV) += cevt-powertv.o
+obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o
diff --git a/arch/mips/powertv/asic/Kconfig b/arch/mips/powertv/asic/Kconfig
new file mode 100644
index 0000000..2016bfe
--- /dev/null
+++ b/arch/mips/powertv/asic/Kconfig
@@ -0,0 +1,28 @@
+config MIN_RUNTIME_RESOURCES
+ bool "Support for minimum runtime resources"
+ default n
+ depends on POWERTV
+ help
+ Enables support for minimizing the number of (SA asic) runtime
+ resources that are preallocated by the kernel.
+
+config MIN_RUNTIME_DOCSIS
+ bool "Support for minimum DOCSIS resource"
+ default y
+ depends on MIN_RUNTIME_RESOURCES
+ help
+ Enables support for the preallocated DOCSIS resource.
+
+config MIN_RUNTIME_PMEM
+ bool "Support for minimum PMEM resource"
+ default y
+ depends on MIN_RUNTIME_RESOURCES
+ help
+ Enables support for the preallocated Memory resource.
+
+config MIN_RUNTIME_TFTP
+ bool "Support for minimum TFTP resource"
+ default y
+ depends on MIN_RUNTIME_RESOURCES
+ help
+ Enables support for the preallocated TFTP resource.
diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile
new file mode 100644
index 0000000..873d079
--- /dev/null
+++ b/arch/mips/powertv/asic/Makefile
@@ -0,0 +1,35 @@
+# *****************************************************************************
+# Make file for PowerTV Asic related files
+#
+# Copyright (C) 2009 Scientific-Atlanta, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# *****************************************************************************
+
+EXTRA_CFLAGS += -Wall -Werror
+
+obj-y :=
+
+obj-$(CONFIG_POWERTV) += asic-calliope.o \
+ asic-cronus.o \
+ asic-zeus.o \
+ asic_devices.o \
+ asic_int.o \
+ irq_asic.o \
+ prealloc-calliope.o \
+ prealloc-cronus.o \
+ prealloc-cronuslite.o \
+ prealloc-zeus.o
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
new file mode 100644
index 0000000..3bc890b
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-calliope.c
@@ -0,0 +1,99 @@
+/*
+ * asic-calliope.c
+ *
+ * Locations of devices in the Calliope ASIC.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: Ken Eppinett
+ * David Schleef <ds@xxxxxxxxxxx>
+ *
+ * Description: Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map calliope_register_map = {
+ .eic_slow0_strt_add = 0x800000,
+ .eic_cfg_bits = 0x800038,
+ .eic_ready_status = 0x80004c,
+
+ .chipver3 = 0xA00800,
+ .chipver2 = 0xA00804,
+ .chipver1 = 0xA00808,
+ .chipver0 = 0xA0080c,
+
+ /* The registers of IRBlaster */
+ .uart1_intstat = 0xA01800,
+ .uart1_inten = 0xA01804,
+ .uart1_config1 = 0xA01808,
+ .uart1_config2 = 0xA0180C,
+ .uart1_divisorhi = 0xA01810,
+ .uart1_divisorlo = 0xA01814,
+ .uart1_data = 0xA01818,
+ .uart1_status = 0xA0181C,
+
+ .int_stat_3 = 0xA02800,
+ .int_stat_2 = 0xA02804,
+ .int_stat_1 = 0xA02808,
+ .int_stat_0 = 0xA0280c,
+ .int_config = 0xA02810,
+ .int_int_scan = 0xA02818,
+ .ien_int_3 = 0xA02830,
+ .ien_int_2 = 0xA02834,
+ .ien_int_1 = 0xA02838,
+ .ien_int_0 = 0xA0283c,
+ .int_level_3_3 = 0xA02880,
+ .int_level_3_2 = 0xA02884,
+ .int_level_3_1 = 0xA02888,
+ .int_level_3_0 = 0xA0288c,
+ .int_level_2_3 = 0xA02890,
+ .int_level_2_2 = 0xA02894,
+ .int_level_2_1 = 0xA02898,
+ .int_level_2_0 = 0xA0289c,
+ .int_level_1_3 = 0xA028a0,
+ .int_level_1_2 = 0xA028a4,
+ .int_level_1_1 = 0xA028a8,
+ .int_level_1_0 = 0xA028ac,
+ .int_level_0_3 = 0xA028b0,
+ .int_level_0_2 = 0xA028b4,
+ .int_level_0_1 = 0xA028b8,
+ .int_level_0_0 = 0xA028bc,
+ .int_docsis_en = 0xA028F4,
+
+ .mips_pll_setup = 0x980000,
+ .usb_fs = 0x980030, /* -default 72800028- */
+ .test_bus = 0x9800CC,
+ .usb2_ohci_int_mask = 0x9A000c,
+ .usb2_strap = 0x9A0014,
+ .ehci_hcapbase = 0x9BFE00,
+ .ohci_hc_revision = 0x9BFC00,
+ .bcm1_bs_lmi_steer = 0x9E0004,
+ .usb2_control = 0x9E0054,
+ .usb2_stbus_obc = 0x9BFF00,
+ .usb2_stbus_mess_size = 0x9BFF04,
+ .usb2_stbus_chunk_size = 0x9BFF08,
+
+ .pcie_regs = 0x000000, /* -doesn't exist- */
+ .tim_ch = 0xA02C10,
+ .tim_cl = 0xA02C14,
+ .gpio_dout = 0xA02c20,
+ .gpio_din = 0xA02c24,
+ .gpio_dir = 0xA02c2C,
+ .watchdog = 0xA02c30,
+ .front_panel = 0x000000, /* -not used- */
+};
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
new file mode 100644
index 0000000..5c2979e
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-cronus.c
@@ -0,0 +1,99 @@
+/*
+ * asic-cronus.c
+ *
+ * Locations of devices in the Cronus ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: Ken Eppinett
+ * David Schleef <ds@xxxxxxxxxxx>
+ *
+ * Description: Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map cronus_register_map = {
+ .eic_slow0_strt_add = 0x000000,
+ .eic_cfg_bits = 0x000038,
+ .eic_ready_status = 0x00004C,
+
+ .chipver3 = 0x2A0800,
+ .chipver2 = 0x2A0804,
+ .chipver1 = 0x2A0808,
+ .chipver0 = 0x2A080C,
+
+ /* The registers of IRBlaster */
+ .uart1_intstat = 0x2A1800,
+ .uart1_inten = 0x2A1804,
+ .uart1_config1 = 0x2A1808,
+ .uart1_config2 = 0x2A180C,
+ .uart1_divisorhi = 0x2A1810,
+ .uart1_divisorlo = 0x2A1814,
+ .uart1_data = 0x2A1818,
+ .uart1_status = 0x2A181C,
+
+ .int_stat_3 = 0x2A2800,
+ .int_stat_2 = 0x2A2804,
+ .int_stat_1 = 0x2A2808,
+ .int_stat_0 = 0x2A280C,
+ .int_config = 0x2A2810,
+ .int_int_scan = 0x2A2818,
+ .ien_int_3 = 0x2A2830,
+ .ien_int_2 = 0x2A2834,
+ .ien_int_1 = 0x2A2838,
+ .ien_int_0 = 0x2A283C,
+ .int_level_3_3 = 0x2A2880,
+ .int_level_3_2 = 0x2A2884,
+ .int_level_3_1 = 0x2A2888,
+ .int_level_3_0 = 0x2A288C,
+ .int_level_2_3 = 0x2A2890,
+ .int_level_2_2 = 0x2A2894,
+ .int_level_2_1 = 0x2A2898,
+ .int_level_2_0 = 0x2A289C,
+ .int_level_1_3 = 0x2A28A0,
+ .int_level_1_2 = 0x2A28A4,
+ .int_level_1_1 = 0x2A28A8,
+ .int_level_1_0 = 0x2A28AC,
+ .int_level_0_3 = 0x2A28B0,
+ .int_level_0_2 = 0x2A28B4,
+ .int_level_0_1 = 0x2A28B8,
+ .int_level_0_0 = 0x2A28BC,
+ .int_docsis_en = 0x2A28F4,
+
+ .mips_pll_setup = 0x1C0000,
+ .usb_fs = 0x1C0018,
+ .test_bus = 0x1C00CC,
+ .usb2_ohci_int_mask = 0x20000C,
+ .usb2_strap = 0x200014,
+ .ehci_hcapbase = 0x21FE00,
+ .ohci_hc_revision = 0x1E0000,
+ .bcm1_bs_lmi_steer = 0x2E0008,
+ .usb2_control = 0x2E004C,
+ .usb2_stbus_obc = 0x21FF00,
+ .usb2_stbus_mess_size = 0x21FF04,
+ .usb2_stbus_chunk_size = 0x21FF08,
+
+ .pcie_regs = 0x220000,
+ .tim_ch = 0x2A2C10,
+ .tim_cl = 0x2A2C14,
+ .gpio_dout = 0x2A2C20,
+ .gpio_din = 0x2A2C24,
+ .gpio_dir = 0x2A2C2C,
+ .watchdog = 0x2A2C30,
+ .front_panel = 0x2A3800,
+};
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
new file mode 100644
index 0000000..ec95abd
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-zeus.c
@@ -0,0 +1,99 @@
+/*
+ * asic-zeus.c
+ *
+ * Locations of devices in the Zeus ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: Ken Eppinett
+ * David Schleef <ds@xxxxxxxxxxx>
+ *
+ * Description: Defines the platform resources for the SA settop.
+ */
+
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map zeus_register_map = {
+ .eic_slow0_strt_add = 0x000000,
+ .eic_cfg_bits = 0x000038,
+ .eic_ready_status = 0x00004c,
+
+ .chipver3 = 0x280800,
+ .chipver2 = 0x280804,
+ .chipver1 = 0x280808,
+ .chipver0 = 0x28080c,
+
+ /* The registers of IRBlaster */
+ .uart1_intstat = 0x281800,
+ .uart1_inten = 0x281804,
+ .uart1_config1 = 0x281808,
+ .uart1_config2 = 0x28180C,
+ .uart1_divisorhi = 0x281810,
+ .uart1_divisorlo = 0x281814,
+ .uart1_data = 0x281818,
+ .uart1_status = 0x28181C,
+
+ .int_stat_3 = 0x282800,
+ .int_stat_2 = 0x282804,
+ .int_stat_1 = 0x282808,
+ .int_stat_0 = 0x28280c,
+ .int_config = 0x282810,
+ .int_int_scan = 0x282818,
+ .ien_int_3 = 0x282830,
+ .ien_int_2 = 0x282834,
+ .ien_int_1 = 0x282838,
+ .ien_int_0 = 0x28283c,
+ .int_level_3_3 = 0x282880,
+ .int_level_3_2 = 0x282884,
+ .int_level_3_1 = 0x282888,
+ .int_level_3_0 = 0x28288c,
+ .int_level_2_3 = 0x282890,
+ .int_level_2_2 = 0x282894,
+ .int_level_2_1 = 0x282898,
+ .int_level_2_0 = 0x28289c,
+ .int_level_1_3 = 0x2828a0,
+ .int_level_1_2 = 0x2828a4,
+ .int_level_1_1 = 0x2828a8,
+ .int_level_1_0 = 0x2828ac,
+ .int_level_0_3 = 0x2828b0,
+ .int_level_0_2 = 0x2828b4,
+ .int_level_0_1 = 0x2828b8,
+ .int_level_0_0 = 0x2828bc,
+ .int_docsis_en = 0x2828F4,
+
+ .mips_pll_setup = 0x1a0000,
+ .usb_fs = 0x1a0018,
+ .test_bus = 0x1a0238,
+ .usb2_ohci_int_mask = 0x1e000c,
+ .usb2_strap = 0x1e0014,
+ .ehci_hcapbase = 0x1FFE00,
+ .ohci_hc_revision = 0x1FFC00,
+ .bcm1_bs_lmi_steer = 0x2C0008,
+ .usb2_control = 0x2c01a0,
+ .usb2_stbus_obc = 0x1FFF00,
+ .usb2_stbus_mess_size = 0x1FFF04,
+ .usb2_stbus_chunk_size = 0x1FFF08,
+
+ .pcie_regs = 0x200000,
+ .tim_ch = 0x282C10,
+ .tim_cl = 0x282C14,
+ .gpio_dout = 0x282c20,
+ .gpio_din = 0x282c24,
+ .gpio_dir = 0x282c2C,
+ .watchdog = 0x282c30,
+ .front_panel = 0x283800,
+};
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
new file mode 100644
index 0000000..842e2fc
--- /dev/null
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -0,0 +1,713 @@
+/*
+ * ASIC Device List Intialization
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *****************************************************************************
+ *
+ * File Name: asic_devices.c
+ *
+ * Author: Ken Eppinett
+ * David Schleef <ds@xxxxxxxxxxx>
+ *
+ * Description: Defines the platform resources for the SA settop.
+ *
+ * NOTE: The bootloader allocates persistent memory at an address which is
+ * 16 MiB below the end of the highest address in KSEG0. All fixed
+ * address memory reservations must avoid this region.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial_reg.h>
+#include <linux/io.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <asm/page.h>
+#include <linux/swap.h>
+#include <linux/highmem.h>
+
+#include <asm/mach-powertv/asic.h>
+#include <asm/mach-powertv/asic_regs.h>
+#include <asm/mach-powertv/interrupts.h>
+
+#ifdef CONFIG_BOOTLOADER_DRIVER
+#include <asm/mach-powertv/kbldr.h>
+#endif
+
+#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
+
+/*
+ * Forward Prototypes
+ */
+static void pmem_setup_resource(void);
+
+/*
+ * Global Variables
+ */
+enum asic_type asic;
+
+unsigned int platform_features;
+unsigned int platform_family;
+const struct register_map *register_map;
+EXPORT_SYMBOL(register_map); /* Exported for testing */
+unsigned long asic_phy_base;
+unsigned long asic_base;
+EXPORT_SYMBOL(asic_base); /* Exported for testing */
+struct resource *gp_resources;
+static bool usb_configured;
+
+/*
+ * Don't recommend to use it directly, it is usually used by kernel internally.
+ * Portable code should be using interfaces such as ioremp, dma_map_single, etc.
+ */
+unsigned long phys_to_bus_offset;
+EXPORT_SYMBOL(phys_to_bus_offset);
+
+/*
+ *
+ * IO Resource Definition
+ *
+ */
+
+struct resource asic_resource = {
+ .name = "ASIC Resource",
+ .start = 0,
+ .end = ASIC_IO_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+/*
+ *
+ * USB Host Resource Definition
+ *
+ */
+
+static struct resource ehci_resources[] = {
+ {
+ .parent = &asic_resource,
+ .start = 0,
+ .end = 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = irq_usbehci,
+ .end = irq_usbehci,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ehci_dmamask = 0xffffffffULL;
+
+static struct platform_device ehci_device = {
+ .name = "powertv-ehci",
+ .id = 0,
+ .num_resources = 2,
+ .resource = ehci_resources,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static struct resource ohci_resources[] = {
+ {
+ .parent = &asic_resource,
+ .start = 0,
+ .end = 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = irq_usbohci,
+ .end = irq_usbohci,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ohci_dmamask = 0xffffffffULL;
+
+static struct platform_device ohci_device = {
+ .name = "powertv-ohci",
+ .id = 0,
+ .num_resources = 2,
+ .resource = ohci_resources,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static struct platform_device *platform_devices[] = {
+ &ehci_device,
+ &ohci_device,
+};
+
+/*
+ *
+ * Platform Configuration and Device Initialization
+ *
+ */
+static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3)
+{
+ int en_prg, byp, pwr, nsb, val;
+ int sout;
+
+ sout = 1;
+ en_prg = 1;
+ byp = 0;
+ nsb = 1;
+ pwr = 1;
+
+ val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) |
+ (nsb<<1) | (disable_div_by_3<<5));
+
+ asic_write(val, usb_fs);
+ asic_write(val | (en_prg<<4), usb_fs);
+ asic_write(val | (en_prg<<4) | pwr, usb_fs);
+}
+
+/*
+ * platform_get_family - determine major platform family type.
+ *
+ * Returns family type; -1 if none
+ *
+ */
+enum family_type platform_get_family(void)
+{
+ unsigned short bootldr_family;
+ static enum family_type family = -1;
+ static int first_time = 1;
+
+ if (first_time) {
+ first_time = 0;
+
+#ifdef CONFIG_BOOTLOADER_DRIVER
+ bootldr_family = (unsigned short) kbldr_GetSWFamily();
+#else
+#if defined(CONFIG_BOOTLOADER_FAMILY)
+ bootldr_family = (unsigned short) BOOTLDRFAMILY(
+ CONFIG_BOOTLOADER_FAMILY[0],
+ CONFIG_BOOTLOADER_FAMILY[1]);
+#else
+#error "Unknown Bootloader Family"
+#endif
+#endif
+
+ pr_info("Bootloader Family = 0x%04X\n", bootldr_family);
+
+ switch (bootldr_family) {
+ case BOOTLDRFAMILY('R', '1'):
+ family = FAMILY_1500;
+ break;
+ case BOOTLDRFAMILY('4', '4'):
+ family = FAMILY_4500;
+ break;
+ case BOOTLDRFAMILY('4', '6'):
+ family = FAMILY_4600;
+ break;
+ case BOOTLDRFAMILY('A', '1'):
+ family = FAMILY_4600VZA;
+ break;
+ case BOOTLDRFAMILY('8', '5'):
+ family = FAMILY_8500;
+ break;
+ case BOOTLDRFAMILY('R', '2'):
+ family = FAMILY_8500RNG;
+ break;
+ case BOOTLDRFAMILY('8', '6'):
+ family = FAMILY_8600;
+ break;
+ case BOOTLDRFAMILY('B', '1'):
+ family = FAMILY_8600VZB;
+ break;
+ case BOOTLDRFAMILY('E', '1'):
+ family = FAMILY_1500VZE;
+ break;
+ case BOOTLDRFAMILY('F', '1'):
+ family = FAMILY_1500VZF;
+ break;
+ default:
+ family = -1;
+ }
+ }
+
+ return family;
+}
+EXPORT_SYMBOL(platform_get_family);
+
+/*
+ * platform_get_asic - determine the ASIC type.
+ *
+ * \param none
+ *
+ * \return ASIC type; ASIC_UNKNOWN if none
+ *
+ */
+enum asic_type platform_get_asic(void)
+{
+ return asic;
+}
+EXPORT_SYMBOL(platform_get_asic);
+
+/**
+ * platform_configure_usb - usb configuration based on platform type.
+ * @divide_by_3: Non-zero to divide clock setting by 3
+ */
+static void platform_configure_usb(void)
+{
+ int divide_by_3;
+
+ if (usb_configured)
+ return;
+
+ switch (asic) {
+ case ASIC_ZEUS:
+ case ASIC_CRONUS:
+ case ASIC_CRONUSLITE:
+ divide_by_3 = 0;
+ break;
+
+ case ASIC_CALLIOPE:
+ divide_by_3 = 1;
+ break;
+
+ default:
+ pr_err("Unknown ASIC type: %d\n", asic);
+ divide_by_3 = 0;
+ break;
+ }
+
+ /* Set up PLL for USB */
+ fs_update(0x0000, 0x11, 0x02, divide_by_3);
+ /* turn on USB power */
+ asic_write(0, usb2_strap);
+ /* Enable all OHCI interrupts */
+ asic_write(0x00000803, usb2_control);
+ /* usb2_stbus_obc store32/load32 */
+ asic_write(3, usb2_stbus_obc);
+ /* usb2_stbus_mess_size 2 packets */
+ asic_write(1, usb2_stbus_mess_size);
+ /* usb2_stbus_chunk_size 2 packets */
+ asic_write(1, usb2_stbus_chunk_size);
+
+ usb_configured = true;
+}
+
+/*
+ * Set up the USB EHCI interface
+ */
+void platform_configure_usb_ehci()
+{ platform_configure_usb();
+}
+
+/*
+ * Set up the USB OHCI interface
+ */
+void platform_configure_usb_ohci()
+{ platform_configure_usb();
+}
+
+/*
+ * Shut the USB EHCI interface down--currently a NOP
+ */
+void platform_unconfigure_usb_ehci()
+{
+}
+
+/*
+ * Shut the USB OHCI interface down--currently a NOP
+ */
+void platform_unconfigure_usb_ohci()
+{
+}
+
+/**
+ * configure_platform - configuration based on platform type.
+ */
+void __init configure_platform(void)
+{
+ platform_family = platform_get_family();
+
+ switch (platform_family) {
+ case FAMILY_1500:
+ case FAMILY_1500VZE:
+ case FAMILY_1500VZF:
+ platform_features = FFS_CAPABLE;
+ asic = ASIC_CALLIOPE;
+ asic_phy_base = CALLIOPE_IO_BASE;
+ register_map = &calliope_register_map;
+ asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+ ASIC_IO_SIZE);
+
+ if (platform_family == FAMILY_1500VZE) {
+ gp_resources = non_dvr_vze_calliope_resources;
+ pr_info("Platform: 1500/Vz Class E - "
+ "CALLIOPE, NON_DVR_CAPABLE\n");
+ } else if (platform_family == FAMILY_1500VZF) {
+ gp_resources = non_dvr_vzf_calliope_resources;
+ pr_info("Platform: 1500/Vz Class F - "
+ "CALLIOPE, NON_DVR_CAPABLE\n");
+ } else {
+ gp_resources = non_dvr_calliope_resources;
+ pr_info("Platform: 1500/RNG100 - CALLIOPE, "
+ "NON_DVR_CAPABLE\n");
+ }
+ break;
+
+ case FAMILY_4500:
+ platform_features = FFS_CAPABLE | PCIE_CAPABLE |
+ DISPLAY_CAPABLE;
+ asic = ASIC_ZEUS;
+ asic_phy_base = ZEUS_IO_BASE;
+ register_map = &zeus_register_map;
+ asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+ ASIC_IO_SIZE);
+ gp_resources = non_dvr_zeus_resources;
+
+ pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
+ break;
+
+ case FAMILY_4600:
+ {
+ unsigned int chipversion = 0;
+
+ /* The settop has PCIE but it isn't used, so don't advertise
+ * it*/
+ platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
+ asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */
+ register_map = &cronus_register_map; /* same as Cronus */
+ asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+ ASIC_IO_SIZE);
+ gp_resources = non_dvr_cronuslite_resources;
+
+ /* ASIC version will determine if this is a real CronusLite or
+ * Castrati(Cronus) */
+ chipversion = asic_read(chipver3) << 24;
+ chipversion |= asic_read(chipver2) << 16;
+ chipversion |= asic_read(chipver1) << 8;
+ chipversion |= asic_read(chipver0);
+
+ if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11))
+ asic = ASIC_CRONUS;
+ else
+ asic = ASIC_CRONUSLITE;
+
+ pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
+ "chipversion=0x%08X\n",
+ (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
+ chipversion);
+ break;
+ }
+ case FAMILY_4600VZA:
+ platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
+ asic = ASIC_CRONUS;
+ asic_phy_base = CRONUS_IO_BASE;
+ register_map = &cronus_register_map;
+ asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+ ASIC_IO_SIZE);
+ gp_resources = non_dvr_cronus_resources;
+
+ pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
+ break;
+
+ case FAMILY_8500:
+ case FAMILY_8500RNG:
+ platform_features = DVR_CAPABLE | PCIE_CAPABLE |
+ DISPLAY_CAPABLE;
+ asic = ASIC_ZEUS;
+ asic_phy_base = ZEUS_IO_BASE;
+ register_map = &zeus_register_map;
+ asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+ ASIC_IO_SIZE);
+ gp_resources = dvr_zeus_resources;
+ break;
+
+ case FAMILY_8600:
+ case FAMILY_8600VZB:
+ platform_features = DVR_CAPABLE | PCIE_CAPABLE |
+ DISPLAY_CAPABLE;
+ asic = ASIC_CRONUS;
+ asic_phy_base = CRONUS_IO_BASE;
+ register_map = &cronus_register_map;
+ asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
+ ASIC_IO_SIZE);
+ gp_resources = dvr_cronus_resources;
+
+ pr_info("Platform: 8600/Vz Class B - CRONUS, "
+ "DVR_CAPABLE\n");
+ break;
+
+ default:
+ platform_features = 0;
+ asic = ASIC_UNKNOWN;
+ asic_phy_base = 0;
+ register_map = NULL;
+ gp_resources = NULL;
+
+ pr_crit("Platform: UNKNOWN PLATFORM\n");
+ break;
+ }
+
+ platform_configure_usb();
+
+ switch (asic) {
+ case ASIC_ZEUS:
+ phys_to_bus_offset = 0x30000000;
+ break;
+ case ASIC_CALLIOPE:
+ phys_to_bus_offset = 0x10000000;
+ break;
+ case ASIC_CRONUSLITE:
+ /* Fall through */
+ case ASIC_CRONUS:
+ /*
+ * TODO: We suppose 0x10000000 aliases into 0x20000000-
+ * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000-
+ * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000.
+ */
+ phys_to_bus_offset = 0x10000000;
+ break;
+ default:
+ phys_to_bus_offset = 0x00000000;
+ break;
+ }
+}
+
+/**
+ * platform_devices_init - sets up USB device resourse.
+ */
+static int __init platform_devices_init(void)
+{
+ pr_notice("%s: ----- Initializing USB resources -----\n", __func__);
+
+ asic_resource.start = asic_phy_base;
+ asic_resource.end += asic_resource.start;
+
+ ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
+ ehci_resources[0].end += ehci_resources[0].start;
+
+ ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
+ ohci_resources[0].end += ohci_resources[0].start;
+
+ set_io_port_base(0);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ return 0;
+}
+
+arch_initcall(platform_devices_init);
+
+/*
+ *
+ * BOOTMEM ALLOCATION
+ *
+ */
+/*
+ * Allocates/reserves the Platform memory resources early in the boot process.
+ * This ignores any resources that are designated IORESOURCE_IO
+ */
+void __init platform_alloc_bootmem(void)
+{
+ int i;
+ int total = 0;
+
+ /* Get persistent memory data from command line before allocating
+ * resources. This need to happen before normal command line parsing
+ * has been done */
+ pmem_setup_resource();
+
+ /* Loop through looking for resources that want a particular address */
+ for (i = 0; gp_resources[i].flags != 0; i++) {
+ int size = gp_resources[i].end - gp_resources[i].start + 1;
+ if ((gp_resources[i].start != 0) &&
+ ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
+ reserve_bootmem(bus_to_phys(gp_resources[i].start),
+ size, 0);
+ total += gp_resources[i].end -
+ gp_resources[i].start + 1;
+ pr_info("reserve resource %s at %08x (%u bytes)\n",
+ gp_resources[i].name, gp_resources[i].start,
+ gp_resources[i].end -
+ gp_resources[i].start + 1);
+ }
+ }
+
+ /* Loop through assigning addresses for those that are left */
+ for (i = 0; gp_resources[i].flags != 0; i++) {
+ int size = gp_resources[i].end - gp_resources[i].start + 1;
+ if ((gp_resources[i].start == 0) &&
+ ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
+ void *mem = alloc_bootmem_pages(size);
+
+ if (mem == NULL)
+ pr_err("Unable to allocate bootmem pages "
+ "for %s\n", gp_resources[i].name);
+
+ else {
+ gp_resources[i].start =
+ phys_to_bus(virt_to_phys(mem));
+ gp_resources[i].end =
+ gp_resources[i].start + size - 1;
+ total += size;
+ pr_info("allocate resource %s at %08x "
+ "(%u bytes)\n",
+ gp_resources[i].name,
+ gp_resources[i].start, size);
+ }
+ }
+ }
+
+ pr_info("Total Platform driver memory allocation: 0x%08x\n", total);
+
+ /* indicate resources that are platform I/O related */
+ for (i = 0; gp_resources[i].flags != 0; i++) {
+ if ((gp_resources[i].start != 0) &&
+ ((gp_resources[i].flags & IORESOURCE_IO) != 0)) {
+ pr_info("reserved platform resource %s at %08x\n",
+ gp_resources[i].name, gp_resources[i].start);
+ }
+ }
+}
+
+/*
+ *
+ * PERSISTENT MEMORY (PMEM) CONFIGURATION
+ *
+ */
+static unsigned long pmemaddr __initdata;
+
+static int __init early_param_pmemaddr(char *p)
+{
+ pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0);
+ return 0;
+}
+early_param("pmemaddr", early_param_pmemaddr);
+
+static long pmemlen __initdata;
+
+static int __init early_param_pmemlen(char *p)
+{
+/* TODO: we can use this code when and if the bootloader ever changes this */
+#if 0
+ pmemlen = (unsigned long)simple_strtoul(p, NULL, 0);
+#else
+ pmemlen = 0x20000;
+#endif
+ return 0;
+}
+early_param("pmemlen", early_param_pmemlen);
+
+/*
+ * Set up persistent memory. If we were given values, we patch the array of
+ * resources. Otherwise, persistent memory may be allocated anywhere at all.
+ */
+static void __init pmem_setup_resource(void)
+{
+ struct resource *resource;
+ resource = asic_resource_get("DiagPersistentMemory");
+
+ if (resource && pmemaddr && pmemlen) {
+ /* The address provided by bootloader is in kseg0. Convert to
+ * a bus address. */
+ resource->start = phys_to_bus(pmemaddr - 0x80000000);
+ resource->end = resource->start + pmemlen - 1;
+
+ pr_info("persistent memory: start=0x%x end=0x%x\n",
+ resource->start, resource->end);
+ }
+}
+
+/*
+ *
+ * RESOURCE ACCESS FUNCTIONS
+ *
+ */
+
+/**
+ * asic_resource_get - retrieves parameters for a platform resource.
+ * @name: string to match resource
+ *
+ * Returns a pointer to a struct resource corresponding to the given name.
+ *
+ * CANNOT BE NAMED platform_resource_get, which would be the obvious choice,
+ * as this function name is already declared
+ */
+struct resource *asic_resource_get(const char *name)
+{
+ int i;
+
+ for (i = 0; gp_resources[i].flags != 0; i++) {
+ if (strcmp(gp_resources[i].name, name) == 0)
+ return &gp_resources[i];
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(asic_resource_get);
+
+/**
+ * platform_release_memory - release pre-allocated memory
+ * @ptr: pointer to memory to release
+ * @size: size of resource
+ *
+ * This must only be called for memory allocated or reserved via the boot
+ * memory allocator.
+ */
+void platform_release_memory(void *ptr, int size)
+{
+ unsigned long addr;
+ unsigned long end;
+
+ addr = ((unsigned long)ptr + (PAGE_SIZE - 1)) & PAGE_MASK;
+ end = ((unsigned long)ptr + size) & PAGE_MASK;
+
+ for (; addr < end; addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(__va(addr)));
+ init_page_count(virt_to_page(__va(addr)));
+ free_page((unsigned long)__va(addr));
+ }
+}
+EXPORT_SYMBOL(platform_release_memory);
+
+/*
+ *
+ * FEATURE AVAILABILITY FUNCTIONS
+ *
+ */
+int platform_supports_dvr(void)
+{
+ return (platform_features & DVR_CAPABLE) != 0;
+}
+
+int platform_supports_ffs(void)
+{
+ return (platform_features & FFS_CAPABLE) != 0;
+}
+
+int platform_supports_pcie(void)
+{
+ return (platform_features & PCIE_CAPABLE) != 0;
+}
+
+int platform_supports_display(void)
+{
+ return (platform_features & DISPLAY_CAPABLE) != 0;
+}
diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c
new file mode 100644
index 0000000..ba60bd6
--- /dev/null
+++ b/arch/mips/powertv/asic/asic_int.c
@@ -0,0 +1,125 @@
+/*
+ * Carsten Langgaard, carstenl@xxxxxxxx
+ * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines for generic manipulation of the interrupts found on the PowerTV
+ * platform.
+ *
+ * The interrupt controller is located in the South Bridge a PIIX4 device
+ * with two internal 82C95 interrupt controllers.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/kernel.h>
+#include <linux/random.h>
+
+#include <asm/irq_cpu.h>
+#include <linux/io.h>
+#include <asm/irq_regs.h>
+#include <asm/mips-boards/generic.h>
+
+#include <asm/mach-powertv/asic_regs.h>
+
+static DEFINE_SPINLOCK(asic_irq_lock);
+
+static inline int get_int(void)
+{
+ unsigned long flags;
+ int irq;
+
+ spin_lock_irqsave(&asic_irq_lock, flags);
+
+ irq = (asic_read(int_int_scan) >> 4) - 1;
+
+ if (irq == 0 || irq >= NR_IRQS)
+ irq = -1;
+
+ spin_unlock_irqrestore(&asic_irq_lock, flags);
+
+ return irq;
+}
+
+static void asic_irqdispatch(void)
+{
+ int irq;
+
+ irq = get_int();
+ if (irq < 0)
+ return; /* interrupt has already been cleared */
+
+ do_IRQ(irq);
+}
+
+static inline int clz(unsigned long x)
+{
+ __asm__(
+ " .set push \n"
+ " .set mips32 \n"
+ " clz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+ return -clz(pending) + 31 - CAUSEB_IP;
+}
+
+/*
+ * TODO: check how it works under EIC mode.
+ */
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+ int irq;
+
+ irq = irq_ffs(pending);
+
+ if (irq == CAUSEF_IP3)
+ asic_irqdispatch();
+ else if (irq >= 0)
+ do_IRQ(irq);
+ else
+ spurious_interrupt();
+}
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ asic_irq_init();
+
+ /*
+ * Initialize interrupt exception vectors.
+ */
+ if (cpu_has_veic || cpu_has_vint) {
+ int nvec = cpu_has_veic ? 64 : 8;
+ for (i = 0; i < nvec; i++)
+ set_vi_handler(i, asic_irqdispatch);
+ }
+}
diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c
new file mode 100644
index 0000000..b54d244
--- /dev/null
+++ b/arch/mips/powertv/asic/irq_asic.c
@@ -0,0 +1,116 @@
+/*
+ * Portions copyright (C) 2005-2009 Scientific Atlanta
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * Modified from arch/mips/kernel/irq-rm7000.c:
+ * Copyright (C) 2003 Ralf Baechle
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-powertv/asic_regs.h>
+
+static inline void unmask_asic_irq(unsigned int irq)
+{
+ unsigned long enable_bit;
+
+ enable_bit = (1 << (irq & 0x1f));
+
+ switch (irq >> 5) {
+ case 0:
+ asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0);
+ break;
+ case 1:
+ asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1);
+ break;
+ case 2:
+ asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2);
+ break;
+ case 3:
+ asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3);
+ break;
+ default:
+ BUG();
+ }
+}
+
+static inline void mask_asic_irq(unsigned int irq)
+{
+ unsigned long disable_mask;
+
+ disable_mask = ~(1 << (irq & 0x1f));
+
+ switch (irq >> 5) {
+ case 0:
+ asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0);
+ break;
+ case 1:
+ asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1);
+ break;
+ case 2:
+ asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2);
+ break;
+ case 3:
+ asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3);
+ break;
+ default:
+ BUG();
+ }
+}
+
+static struct irq_chip asic_irq_chip = {
+ .name = "ASIC Level",
+ .ack = mask_asic_irq,
+ .mask = mask_asic_irq,
+ .mask_ack = mask_asic_irq,
+ .unmask = unmask_asic_irq,
+ .eoi = unmask_asic_irq,
+};
+
+void __init asic_irq_init(void)
+{
+ int i;
+
+ /* set priority to 0 */
+ write_c0_status(read_c0_status() & ~(0x0000fc00));
+
+ asic_write(0, ien_int_0);
+ asic_write(0, ien_int_1);
+ asic_write(0, ien_int_2);
+ asic_write(0, ien_int_3);
+
+ asic_write(0x0fffffff, int_level_3_3);
+ asic_write(0xffffffff, int_level_3_2);
+ asic_write(0xffffffff, int_level_3_1);
+ asic_write(0xffffffff, int_level_3_0);
+ asic_write(0xffffffff, int_level_2_3);
+ asic_write(0xffffffff, int_level_2_2);
+ asic_write(0xffffffff, int_level_2_1);
+ asic_write(0xffffffff, int_level_2_0);
+ asic_write(0xffffffff, int_level_1_3);
+ asic_write(0xffffffff, int_level_1_2);
+ asic_write(0xffffffff, int_level_1_1);
+ asic_write(0xffffffff, int_level_1_0);
+ asic_write(0xffffffff, int_level_0_3);
+ asic_write(0xffffffff, int_level_0_2);
+ asic_write(0xffffffff, int_level_0_1);
+ asic_write(0xffffffff, int_level_0_0);
+
+ asic_write(0xf, int_int_scan);
+
+ /*
+ * Initialize interrupt handlers.
+ */
+ for (i = 0; i < NR_IRQS; i++)
+ set_irq_chip_and_handler(i, &asic_irq_chip, handle_level_irq);
+}
diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c
new file mode 100644
index 0000000..6823c4c
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-calliope.c
@@ -0,0 +1,642 @@
+/*
+ * prealloc-calliope.c
+ *
+ * Memory pre-allocations for Calliope boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: Ken Eppinett
+ * David Schleef <ds@xxxxxxxxxxx>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * NON_DVR_CAPABLE CALLIOPE RESOURCES
+ */
+struct resource non_dvr_calliope_resources[] __initdata =
+{
+ /*
+ * VIDEO / LX1
+ */
+ {
+ .name = "ST231aImage", /* Delta-Mu 1 image and ram */
+ .start = 0x24000000,
+ .end = 0x24200000 - 1, /*2MiB */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ST231aMonitor", /*8KiB block ST231a monitor */
+ .start = 0x24200000,
+ .end = 0x24202000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x24202000,
+ .end = 0x26700000 - 1, /*~36.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Sysaudio Driver
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * STAVEM driver/STAPI
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x00000000,
+ .end = 0x00600000 - 1, /* 6 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * DOCSIS Subsystem
+ */
+ {
+ .name = "Docsis",
+ .start = 0x22000000,
+ .end = 0x22700000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * GHW HAL Driver
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x22700000,
+ .end = 0x23500000 - 1, /* 14 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * multi com buffer area
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x23700000,
+ .end = 0x23720000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * DMA Ring buffer (don't need recording buffers)
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x000AA000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Display bins buffer for unit0
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * AVFS: player HAL memory
+ *
+ *
+ */
+ {
+ .name = "AvfsDmaMem",
+ .start = 0x00000000,
+ .end = 0x002c4c00 - 1, /* 945K * 3 for playback */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * PMEM
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Smartcard
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x00000000,
+ .end = 0x2800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * NAND Flash
+ */
+ {
+ .name = "NandFlash",
+ .start = NAND_FLASH_BASE,
+ .end = NAND_FLASH_BASE + 0x400 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ * Synopsys GMAC Memory Region
+ */
+ {
+ .name = "GMAC",
+ .start = 0x00000000,
+ .end = 0x00010000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Add other resources here
+ *
+ */
+ /*
+ * End of Resource marker
+ */
+ {
+ .flags = 0,
+ },
+};
+
+struct resource non_dvr_vz_calliope_resources[] __initdata =
+{
+ /*
+ * VIDEO / LX1
+ */
+ {
+ .name = "ST231aImage", /* Delta-Mu 1 image and ram */
+ .start = 0x24000000,
+ .end = 0x24200000 - 1, /*2 Meg */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ST231aMonitor", /* 8k block ST231a monitor */
+ .start = 0x24200000,
+ .end = 0x24202000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x22202000,
+ .end = 0x22C20B85 - 1, /* 10.12 Meg */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Sysaudio Driver
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * STAVEM driver/STAPI
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x20300000,
+ .end = 0x20620000-1, /*3.125 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * GHW HAL Driver
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x20100000,
+ .end = 0x20300000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * multi com buffer area
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x23900000,
+ .end = 0x23920000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * DMA Ring buffer
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x000AA000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Display bins buffer for unit0
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * PMEM
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Smartcard
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x00000000,
+ .end = 0x2800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * NAND Flash
+ */
+ {
+ .name = "NandFlash",
+ .start = NAND_FLASH_BASE,
+ .end = NAND_FLASH_BASE+0x400 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ * Synopsys GMAC Memory Region
+ */
+ {
+ .name = "GMAC",
+ .start = 0x00000000,
+ .end = 0x00010000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Add other resources here
+ */
+ /*
+ * End of Resource marker
+ */
+ {
+ .flags = 0,
+ },
+};
+
+struct resource non_dvr_vze_calliope_resources[] __initdata =
+{
+ /*
+ * VIDEO / LX1
+ */
+ {
+ .name = "ST231aImage", /* Delta-Mu 1 image and ram */
+ .start = 0x22000000,
+ .end = 0x22200000 - 1, /*2 Meg */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ST231aMonitor", /* 8k block ST231a monitor */
+ .start = 0x22200000,
+ .end = 0x22202000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x22202000,
+ .end = 0x22C20B85 - 1, /* 10.12 Meg */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Sysaudio Driver
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * STAVEM driver/STAPI
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x20396000,
+ .end = 0x206B6000 - 1, /* 3.125 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * GHW HAL Driver
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x20100000,
+ .end = 0x20396000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * multi com buffer area
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x206B6000,
+ .end = 0x206D6000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * DMA Ring buffer
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x000AA000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Display bins buffer for unit0
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * PMEM
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Smartcard
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x00000000,
+ .end = 0x2800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * NAND Flash
+ */
+ {
+ .name = "NandFlash",
+ .start = NAND_FLASH_BASE,
+ .end = NAND_FLASH_BASE+0x400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Synopsys GMAC Memory Region
+ */
+ {
+ .name = "GMAC",
+ .start = 0x00000000,
+ .end = 0x00010000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Add other resources here
+ */
+ /*
+ * End of Resource marker
+ */
+ {
+ .flags = 0,
+ },
+};
+
+struct resource non_dvr_vzf_calliope_resources[] __initdata =
+{
+ /*
+ * VIDEO / LX1
+ */
+ {
+ .name = "ST231aImage", /*Delta-Mu 1 image and ram */
+ .start = 0x24000000,
+ .end = 0x24200000 - 1, /*2MiB */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ST231aMonitor", /*8KiB block ST231a monitor */
+ .start = 0x24200000,
+ .end = 0x24202000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x24202000,
+ /* ~19.4 (21.5MiB - (2MiB + 8KiB)) */
+ .end = 0x25580000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Sysaudio Driver
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * STAVEM driver/STAPI
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x00000000,
+ .end = 0x00480000 - 1, /* 4.5 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * GHW HAL Driver
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x22700000,
+ .end = 0x23500000 - 1, /* 14 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * multi com buffer area
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x23700000,
+ .end = 0x23720000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * DMA Ring buffer (don't need recording buffers)
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x000AA000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Display bins buffer for unit0
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Display bins buffer for unit1
+ */
+ {
+ .name = "DisplayBins1",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * AVFS: player HAL memory
+ *
+ *
+ */
+ {
+ .name = "AvfsDmaMem",
+ .start = 0x00000000,
+ .end = 0x002c4c00 - 1, /* 945K * 3 for playback */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * PMEM
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Smartcard
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x00000000,
+ .end = 0x2800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * NAND Flash
+ */
+ {
+ .name = "NandFlash",
+ .start = NAND_FLASH_BASE,
+ .end = NAND_FLASH_BASE + 0x400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Synopsys GMAC Memory Region
+ */
+ {
+ .name = "GMAC",
+ .start = 0x00000000,
+ .end = 0x00010000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Add other resources here
+ */
+ /*
+ * End of Resource marker
+ */
+ {
+ .flags = 0,
+ },
+};
diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c
new file mode 100644
index 0000000..b433efd
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-cronus.c
@@ -0,0 +1,625 @@
+/*
+ * prealloc-cronus.c
+ *
+ * Memory pre-allocations for Cronus boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: Ken Eppinett
+ * David Schleef <ds@xxxxxxxxxxx>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * DVR_CAPABLE CRONUS RESOURCES
+ */
+struct resource dvr_cronus_resources[] __initdata =
+{
+ /*
+ *
+ * VIDEO1 / LX1
+ *
+ */
+ {
+ .name = "ST231aImage", /* Delta-Mu 1 image and ram */
+ .start = 0x24000000,
+ .end = 0x241FFFFF, /* 2MiB */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ST231aMonitor", /* 8KiB block ST231a monitor */
+ .start = 0x24200000,
+ .end = 0x24201FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x24202000,
+ .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * VIDEO2 / LX2
+ *
+ */
+ {
+ .name = "ST231bImage", /* Delta-Mu 2 image and ram */
+ .start = 0x60000000,
+ .end = 0x601FFFFF, /* 2MiB */
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "ST231bMonitor", /* 8KiB block ST231b monitor */
+ .start = 0x60200000,
+ .end = 0x60201FFF,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "MediaMemory2",
+ .start = 0x60202000,
+ .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * Sysaudio Driver
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * DSP_Image_Buff - DSP code and data images (1MB)
+ * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+ * ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+ * ADSC_Main_Buff - ADSC Main buffer (16KB)
+ *
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * STAVEM driver/STAPI
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * This memory area is used for allocating buffers for Video decoding
+ * purposes. Allocation/De-allocation within this buffer is managed
+ * by the STAVMEM driver of the STAPI. They could be Decimated
+ * Picture Buffers, Intermediate Buffers, as deemed necessary for
+ * video decoding purposes, for any video decoders on Zeus.
+ *
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x63580000,
+ .end = 0x64180000 - 1, /* 12 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * DOCSIS Subsystem
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "Docsis",
+ .start = 0x62000000,
+ .end = 0x62700000 - 1, /* 7 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * GHW HAL Driver
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * GraphicsHeap - PowerTV Graphics Heap
+ *
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x62700000,
+ .end = 0x63500000 - 1, /* 14 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * multi com buffer area
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x26000000,
+ .end = 0x26020000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * DMA Ring buffer
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x00280000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Display bins buffer for unit0
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Display Bins for unit0
+ *
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Display bins buffer
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Display Bins for unit1
+ *
+ */
+ {
+ .name = "DisplayBins1",
+ .start = 0x64AD4000,
+ .end = 0x64AD5000 - 1, /* 4 KB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * ITFS
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "ITFS",
+ .start = 0x64180000,
+ /* 815,104 bytes each for 2 ITFS partitions. */
+ .end = 0x6430DFFF,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * AVFS
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "AvfsDmaMem",
+ .start = 0x6430E000,
+ /* (945K * 8) = (128K *3) 5 playbacks / 3 server */
+ .end = 0x64AD0000 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "AvfsFileSys",
+ .start = 0x64AD0000,
+ .end = 0x64AD1000 - 1, /* 4K */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * PMEM
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Persistent memory for diagnostics.
+ *
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Smartcard
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Read and write buffers for Internal/External cards
+ *
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x64AD1000,
+ .end = 0x64AD3800 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * KAVNET
+ * NP Reset Vector - must be of the form xxCxxxxx
+ * NP Image - must be video bank 1
+ * NP IPC - must be video bank 2
+ */
+ {
+ .name = "NP_Reset_Vector",
+ .start = 0x27c00000,
+ .end = 0x27c01000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "NP_Image",
+ .start = 0x27020000,
+ .end = 0x27060000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "NP_IPC",
+ .start = 0x63500000,
+ .end = 0x63580000 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ * Add other resources here
+ */
+ /*
+ * End of Resource marker
+ *
+ */
+ {
+ .flags = 0,
+ },
+};
+
+/*
+ * NON_DVR_CAPABLE CRONUS RESOURCES
+ */
+struct resource non_dvr_cronus_resources[] __initdata =
+{
+ /*
+ *
+ * VIDEO1 / LX1
+ *
+ */
+ {
+ .name = "ST231aImage", /* Delta-Mu 1 image and ram */
+ .start = 0x24000000,
+ .end = 0x241FFFFF, /* 2MiB */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ST231aMonitor", /* 8KiB block ST231a monitor */
+ .start = 0x24200000,
+ .end = 0x24201FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x24202000,
+ .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * VIDEO2 / LX2
+ *
+ */
+ {
+ .name = "ST231bImage", /* Delta-Mu 2 image and ram */
+ .start = 0x60000000,
+ .end = 0x601FFFFF, /* 2MiB */
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "ST231bMonitor", /* 8KiB block ST231b monitor */
+ .start = 0x60200000,
+ .end = 0x60201FFF,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "MediaMemory2",
+ .start = 0x60202000,
+ .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * Sysaudio Driver
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * DSP_Image_Buff - DSP code and data images (1MB)
+ * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+ * ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+ * ADSC_Main_Buff - ADSC Main buffer (16KB)
+ *
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * STAVEM driver/STAPI
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * This memory area is used for allocating buffers for Video decoding
+ * purposes. Allocation/De-allocation within this buffer is managed
+ * by the STAVMEM driver of the STAPI. They could be Decimated
+ * Picture Buffers, Intermediate Buffers, as deemed necessary for
+ * video decoding purposes, for any video decoders on Zeus.
+ *
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x63580000,
+ .end = 0x64180000 - 1, /* 12 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * DOCSIS Subsystem
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "Docsis",
+ .start = 0x62000000,
+ .end = 0x62700000 - 1, /* 7 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * GHW HAL Driver
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * GraphicsHeap - PowerTV Graphics Heap
+ *
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x62700000,
+ .end = 0x63500000 - 1, /* 14 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * multi com buffer area
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x26000000,
+ .end = 0x26020000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * DMA Ring buffer
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x000AA000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Display bins buffer for unit0
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Display Bins for unit0
+ *
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Display bins buffer
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Display Bins for unit1
+ *
+ */
+ {
+ .name = "DisplayBins1",
+ .start = 0x64AD4000,
+ .end = 0x64AD5000 - 1, /* 4 KB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * AVFS: player HAL memory
+ *
+ *
+ */
+ {
+ .name = "AvfsDmaMem",
+ .start = 0x6430E000,
+ .end = 0x645D2C00 - 1, /* 945K * 3 for playback */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * PMEM
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Persistent memory for diagnostics.
+ *
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Smartcard
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Read and write buffers for Internal/External cards
+ *
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x64AD1000,
+ .end = 0x64AD3800 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * KAVNET
+ * NP Reset Vector - must be of the form xxCxxxxx
+ * NP Image - must be video bank 1
+ * NP IPC - must be video bank 2
+ */
+ {
+ .name = "NP_Reset_Vector",
+ .start = 0x27c00000,
+ .end = 0x27c01000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "NP_Image",
+ .start = 0x27020000,
+ .end = 0x27060000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "NP_IPC",
+ .start = 0x63500000,
+ .end = 0x63580000 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ * Add other resources here
+ */
+ /*
+ * End of Resource marker
+ *
+ */
+ {
+ .flags = 0,
+ },
+};
diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c
new file mode 100644
index 0000000..5bba999
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-cronuslite.c
@@ -0,0 +1,298 @@
+/*
+ * prealloc-cronuslite.c
+ *
+ * Memory pre-allocations for Cronus Lite boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: Ken Eppinett
+ * David Schleef <ds@xxxxxxxxxxx>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * NON_DVR_CAPABLE CRONUSLITE RESOURCES
+ */
+struct resource non_dvr_cronuslite_resources[] __initdata =
+{
+ /*
+ *
+ * VIDEO2 / LX2
+ *
+ */
+ {
+ .name = "ST231aImage", /* Delta-Mu 2 image and ram */
+ .start = 0x60000000,
+ .end = 0x601FFFFF, /* 2MiB */
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "ST231aMonitor", /* 8KiB block ST231b monitor */
+ .start = 0x60200000,
+ .end = 0x60201FFF,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x60202000,
+ .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * Sysaudio Driver
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * DSP_Image_Buff - DSP code and data images (1MB)
+ * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+ * ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+ * ADSC_Main_Buff - ADSC Main buffer (16KB)
+ *
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * STAVEM driver/STAPI
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * This memory area is used for allocating buffers for Video decoding
+ * purposes. Allocation/De-allocation within this buffer is managed
+ * by the STAVMEM driver of the STAPI. They could be Decimated
+ * Picture Buffers, Intermediate Buffers, as deemed necessary for
+ * video decoding purposes, for any video decoders on Zeus.
+ *
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x63580000,
+ .end = 0x63B80000 - 1, /* 6 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * DOCSIS Subsystem
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "Docsis",
+ .start = 0x62000000,
+ .end = 0x62700000 - 1, /* 7 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * GHW HAL Driver
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * GraphicsHeap - PowerTV Graphics Heap
+ *
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x62700000,
+ .end = 0x63500000 - 1, /* 14 MB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * multi com buffer area
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x26000000,
+ .end = 0x26020000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * DMA Ring buffer
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x000AA000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Display bins buffer for unit0
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Display Bins for unit0
+ *
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Display bins buffer
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Display Bins for unit1
+ *
+ */
+ {
+ .name = "DisplayBins1",
+ .start = 0x63B83000,
+ .end = 0x63B84000 - 1, /* 4 KB total */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * AVFS: player HAL memory
+ *
+ *
+ */
+ {
+ .name = "AvfsDmaMem",
+ .start = 0x63B84000,
+ .end = 0x63E48C00 - 1, /* 945K * 3 for playback */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * PMEM
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Persistent memory for diagnostics.
+ *
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Smartcard
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Read and write buffers for Internal/External cards
+ *
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x63B80000,
+ .end = 0x63B82800 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * KAVNET
+ * NP Reset Vector - must be of the form xxCxxxxx
+ * NP Image - must be video bank 1
+ * NP IPC - must be video bank 2
+ */
+ {
+ .name = "NP_Reset_Vector",
+ .start = 0x27c00000,
+ .end = 0x27c01000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "NP_Image",
+ .start = 0x27020000,
+ .end = 0x27060000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "NP_IPC",
+ .start = 0x63500000,
+ .end = 0x63580000 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ * NAND Flash
+ */
+ {
+ .name = "NandFlash",
+ .start = NAND_FLASH_BASE,
+ .end = NAND_FLASH_BASE + 0x400 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ * Add other resources here
+ */
+ /*
+ * End of Resource marker
+ *
+ */
+ {
+ .flags = 0,
+ },
+};
diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c
new file mode 100644
index 0000000..3205954
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-zeus.c
@@ -0,0 +1,471 @@
+/*
+ * prealloc-zeus.c
+ *
+ * Memory pre-allocations for Zeus boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: Ken Eppinett
+ * David Schleef <ds@xxxxxxxxxxx>
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * DVR_CAPABLE RESOURCES
+ */
+struct resource dvr_zeus_resources[] __initdata =
+{
+ /*
+ *
+ * VIDEO1 / LX1
+ *
+ */
+ {
+ .name = "ST231aImage", /* Delta-Mu 1 image and ram */
+ .start = 0x20000000,
+ .end = 0x201FFFFF, /* 2MiB */
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "ST231aMonitor", /* 8KiB block ST231a monitor */
+ .start = 0x20200000,
+ .end = 0x20201FFF,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x20202000,
+ .end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * VIDEO2 / LX2
+ *
+ */
+ {
+ .name = "ST231bImage", /* Delta-Mu 2 image and ram */
+ .start = 0x30000000,
+ .end = 0x301FFFFF, /* 2MiB */
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "ST231bMonitor", /* 8KiB block ST231b monitor */
+ .start = 0x30200000,
+ .end = 0x30201FFF,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "MediaMemory2",
+ .start = 0x30202000,
+ .end = 0x31FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ *
+ * Sysaudio Driver
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * DSP_Image_Buff - DSP code and data images (1MB)
+ * ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+ * ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+ * ADSC_Main_Buff - ADSC Main buffer (16KB)
+ *
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * STAVEM driver/STAPI
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * This memory area is used for allocating buffers for Video decoding
+ * purposes. Allocation/De-allocation within this buffer is managed
+ * by the STAVMEM driver of the STAPI. They could be Decimated
+ * Picture Buffers, Intermediate Buffers, as deemed necessary for
+ * video decoding purposes, for any video decoders on Zeus.
+ *
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x00000000,
+ .end = 0x00c00000 - 1, /* 12 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * DOCSIS Subsystem
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "Docsis",
+ .start = 0x40100000,
+ .end = 0x407fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * GHW HAL Driver
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * GraphicsHeap - PowerTV Graphics Heap
+ *
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x46900000,
+ .end = 0x47700000 - 1, /* 14 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * multi com buffer area
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x47900000,
+ .end = 0x47920000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * DMA Ring buffer
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x00280000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Display bins buffer for unit0
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Display Bins for unit0
+ *
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Display bins buffer
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Display Bins for unit1
+ *
+ */
+ {
+ .name = "DisplayBins1",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * ITFS
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "ITFS",
+ .start = 0x00000000,
+ /* 815,104 bytes each for 2 ITFS partitions. */
+ .end = 0x0018DFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * AVFS
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Docsis -
+ *
+ */
+ {
+ .name = "AvfsDmaMem",
+ .start = 0x00000000,
+ /* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
+ .end = 0x007c2000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "AvfsFileSys",
+ .start = 0x00000000,
+ .end = 0x00001000 - 1, /* 4K */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * PMEM
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Persistent memory for diagnostics.
+ *
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * Smartcard
+ *
+ * This driver requires:
+ *
+ * Arbitrary Based Buffers:
+ * Read and write buffers for Internal/External cards
+ *
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x00000000,
+ .end = 0x2800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Add other resources here
+ */
+ /*
+ * End of Resource marker
+ *
+ */
+ {
+ .flags = 0,
+ },
+};
+
+/*
+ * NON_DVR_CAPABLE ZEUS RESOURCES
+ */
+struct resource non_dvr_zeus_resources[] __initdata =
+{
+ /*
+ * VIDEO1 / LX1
+ */
+ {
+ .name = "ST231aImage", /* Delta-Mu 1 image and ram */
+ .start = 0x20000000,
+ .end = 0x201FFFFF, /* 2MiB */
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "ST231aMonitor", /* 8KiB block ST231a monitor */
+ .start = 0x20200000,
+ .end = 0x20201FFF,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "MediaMemory1",
+ .start = 0x20202000,
+ .end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ * Sysaudio Driver
+ */
+ {
+ .name = "DSP_Image_Buff",
+ .start = 0x00000000,
+ .end = 0x000FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_CPU_PCM_Buff",
+ .start = 0x00000000,
+ .end = 0x00009FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_AUX_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "ADSC_Main_Buff",
+ .start = 0x00000000,
+ .end = 0x00003FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * STAVEM driver/STAPI
+ */
+ {
+ .name = "AVMEMPartition0",
+ .start = 0x00000000,
+ .end = 0x00600000 - 1, /* 6 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * DOCSIS Subsystem
+ */
+ {
+ .name = "Docsis",
+ .start = 0x40100000,
+ .end = 0x407fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * GHW HAL Driver
+ */
+ {
+ .name = "GraphicsHeap",
+ .start = 0x46900000,
+ .end = 0x47700000 - 1, /* 14 MB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * multi com buffer area
+ */
+ {
+ .name = "MulticomSHM",
+ .start = 0x47900000,
+ .end = 0x47920000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * DMA Ring buffer
+ */
+ {
+ .name = "BMM_Buffer",
+ .start = 0x00000000,
+ .end = 0x00280000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Display bins buffer for unit0
+ */
+ {
+ .name = "DisplayBins0",
+ .start = 0x00000000,
+ .end = 0x00000FFF, /* 4 KB total */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ *
+ * AVFS: player HAL memory
+ *
+ *
+ */
+ {
+ .name = "AvfsDmaMem",
+ .start = 0x00000000,
+ .end = 0x002c4c00 - 1, /* 945K * 3 for playback */
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * PMEM
+ */
+ {
+ .name = "DiagPersistentMemory",
+ .start = 0x00000000,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * Smartcard
+ */
+ {
+ .name = "SmartCardInfo",
+ .start = 0x00000000,
+ .end = 0x2800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * NAND Flash
+ */
+ {
+ .name = "NandFlash",
+ .start = NAND_FLASH_BASE,
+ .end = NAND_FLASH_BASE + 0x400 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ /*
+ * Add other resources here
+ *
+ * End of Resource marker
+ */
+ {
+ .flags = 0,
+ },
+};
diff --git a/arch/mips/powertv/cevt-powertv.c b/arch/mips/powertv/cevt-powertv.c
new file mode 100644
index 0000000..ef7768d
--- /dev/null
+++ b/arch/mips/powertv/cevt-powertv.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2008 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * The file comes from kernel/cevt-r4k.c
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/version.h>
+
+#include <asm/smtc_ipi.h>
+#include <asm/time.h> /* Not included in linux/time.h */
+
+#include <asm/mach-powertv/interrupts.h>
+#include "powertv-clock.h"
+
+static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned int cnt;
+ int res;
+
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
+ res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ return res;
+}
+
+static void mips_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ /* Nothing to do ... */
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+static int cp0_timer_irq_installed;
+
+/*
+ * Timer ack for an R4k-compatible timer of a known frequency.
+ */
+static void c0_timer_ack(void)
+{
+ write_c0_compare(read_c0_compare());
+}
+
+#ifndef CONFIG_SEPARATE_PCI_TI
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+static inline int handle_perf_irq(int r2)
+{
+ /*
+ * The performance counter overflow interrupt may be shared with the
+ * timer interrupt (cp0_perfcount_irq < 0). If it is and a
+ * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+ * and we can't reliably determine if a counter interrupt has also
+ * happened (!r2) then don't check for a timer interrupt.
+ */
+ return (cp0_perfcount_irq < 0) &&
+ perf_irq() == IRQ_HANDLED &&
+ !r2;
+}
+#endif
+
+static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+ const int r2 = cpu_has_mips_r2;
+ struct clock_event_device *cd;
+ int cpu = smp_processor_id();
+
+#ifndef CONFIG_SEPARATE_PCI_TI
+ /*
+ * Suckage alert:
+ * Before R2 of the architecture there was no way to see if a
+ * performance counter interrupt was pending, so we have to run
+ * the performance counter interrupt handler anyway.
+ */
+ if (handle_perf_irq(r2))
+ return IRQ_HANDLED;
+#endif
+
+ /*
+ * The same applies to performance counter interrupts. But with the
+ * above we now know that the reason we got here must be a timer
+ * interrupt. Being the paranoiacs we are we check anyway.
+ */
+ if (!r2 || (read_c0_cause() & (1 << 30))) {
+ c0_timer_ack();
+ cd = &per_cpu(mips_clockevent_device, cpu);
+ cd->event_handler(cd);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction c0_compare_irqaction = {
+ .handler = c0_compare_interrupt,
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .name = "timer",
+};
+
+static void mips_event_handler(struct clock_event_device *dev)
+{
+}
+
+int __cpuinit powertv_clockevent_init(void)
+{
+ uint64_t mips_freq = mips_hpt_frequency;
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd;
+ unsigned int irq;
+
+ if (!cpu_has_counter || !mips_hpt_frequency)
+ return -ENXIO;
+
+
+ irq = irq_mips_timer;
+
+ cd = &per_cpu(mips_clockevent_device, cpu);
+
+ cd->name = "MIPS";
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
+
+ /* Calculate the min / max delta */
+ cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+ cd->shift = 32;
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
+
+ cd->rating = 300;
+ cd->irq = irq;
+ cd->cpumask = get_cpu_mask(cpu);
+
+ cd->set_next_event = mips_next_event;
+ cd->set_mode = mips_set_mode;
+ cd->event_handler = mips_event_handler;
+
+ clockevents_register_device(cd);
+
+ if (cp0_timer_irq_installed)
+ return 0;
+
+ cp0_timer_irq_installed = 1;
+
+ setup_irq(irq, &c0_compare_irqaction);
+
+ return 0;
+}
diff --git a/arch/mips/powertv/cmdline.c b/arch/mips/powertv/cmdline.c
new file mode 100644
index 0000000..98d73cb
--- /dev/null
+++ b/arch/mips/powertv/cmdline.c
@@ -0,0 +1,52 @@
+/*
+ * Carsten Langgaard, carstenl@xxxxxxxx
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+#include "init.h"
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension.
+ */
+#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+void __init prom_init_cmdline(void)
+{
+ int len;
+
+ if (prom_argc != 1)
+ return;
+
+ len = strlen(arcs_cmdline);
+
+ arcs_cmdline[len] = ' ';
+
+ strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv,
+ COMMAND_LINE_SIZE - len - 1);
+}
diff --git a/arch/mips/powertv/csrc-powertv.c b/arch/mips/powertv/csrc-powertv.c
new file mode 100644
index 0000000..a27c16c
--- /dev/null
+++ b/arch/mips/powertv/csrc-powertv.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2008 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * The file comes from kernel/csrc-r4k.c
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+
+#include <asm/time.h> /* Not included in linux/time.h */
+
+#include <asm/mach-powertv/asic_regs.h>
+#include "powertv-clock.h"
+
+/* MIPS PLL Register Definitions */
+#define PLL_GET_M(x) (((x) >> 8) & 0x000000FF)
+#define PLL_GET_N(x) (((x) >> 16) & 0x000000FF)
+#define PLL_GET_P(x) (((x) >> 24) & 0x00000007)
+
+/*
+ * returns: Clock frequency in kHz
+ */
+unsigned int __init mips_get_pll_freq(void)
+{
+ unsigned int pll_reg, m, n, p;
+ unsigned int fin = 54000; /* Base frequency in kHz */
+ unsigned int fout;
+
+ /* Read PLL register setting */
+ pll_reg = asic_read(mips_pll_setup);
+ m = PLL_GET_M(pll_reg);
+ n = PLL_GET_N(pll_reg);
+ p = PLL_GET_P(pll_reg);
+ pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p);
+
+ /* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */
+ fout = ((2 * n * fin) / (m * (0x01 << p)));
+
+ pr_info("MIPS Clock Freq=%d kHz\n", fout);
+
+ return fout;
+}
+
+static cycle_t c0_hpt_read(struct clocksource *cs)
+{
+ return read_c0_count();
+}
+
+static struct clocksource clocksource_mips = {
+ .name = "powertv-counter",
+ .read = c0_hpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init powertv_c0_hpt_clocksource_init(void)
+{
+ unsigned int pll_freq = mips_get_pll_freq();
+
+ pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000,
+ (pll_freq % 1000) * 100 / 1000);
+
+ mips_hpt_frequency = pll_freq / 2 * 1000;
+
+ clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
+
+ clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
+
+ clocksource_register(&clocksource_mips);
+}
+
+/**
+ * struct tim_c - free running counter
+ * @hi: High 16 bits of the counter
+ * @lo: Low 32 bits of the counter
+ *
+ * Lays out the structure of the free running counter in memory. This counter
+ * increments at a rate of 27 MHz/8 on all platforms.
+ */
+struct tim_c {
+ unsigned int hi;
+ unsigned int lo;
+};
+
+static struct tim_c *tim_c;
+
+static cycle_t tim_c_read(struct clocksource *cs)
+{
+ unsigned int hi;
+ unsigned int next_hi;
+ unsigned int lo;
+
+ hi = readl(&tim_c->hi);
+
+ for (;;) {
+ lo = readl(&tim_c->lo);
+ next_hi = readl(&tim_c->hi);
+ if (next_hi == hi)
+ break;
+ hi = next_hi;
+ }
+
+pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo);
+ return ((u64) hi << 32) | lo;
+}
+
+#define TIM_C_SIZE 48 /* # bits in the timer */
+
+static struct clocksource clocksource_tim_c = {
+ .name = "powertv-tim_c",
+ .read = tim_c_read,
+ .mask = CLOCKSOURCE_MASK(TIM_C_SIZE),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/**
+ * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
+ *
+ * The hard part here is coming up with a constant k and shift s such that
+ * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
+ * when shifted right by s, yields the corresponding number of nanoseconds.
+ * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
+ * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
+ * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
+ * done in 64 bits, avoiding an overflow means that k must be less than
+ * 64 - 48 = 16 bits.
+ */
+static void __init powertv_tim_c_clocksource_init(void)
+{
+ int prescale;
+ unsigned long dividend;
+ unsigned long k;
+ int s;
+ const int max_k_bits = (64 - 48) - 1;
+ const unsigned long billion = 1000000000;
+ const unsigned long counts_per_second = 27000000 / 8;
+
+ prescale = BITS_PER_LONG - ilog2(billion) - 1;
+ dividend = billion << prescale;
+ k = dividend / counts_per_second;
+ s = ilog2(k) - max_k_bits;
+
+ if (s < 0)
+ s = prescale;
+
+ else {
+ k >>= s;
+ s += prescale;
+ }
+
+ clocksource_tim_c.mult = k;
+ clocksource_tim_c.shift = s;
+ clocksource_tim_c.rating = 200;
+
+ clocksource_register(&clocksource_tim_c);
+ tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
+}
+
+/**
+ powertv_clocksource_init - initialize all clocksources
+ */
+void __init powertv_clocksource_init(void)
+{
+ powertv_c0_hpt_clocksource_init();
+ powertv_tim_c_clocksource_init();
+}
diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c
new file mode 100644
index 0000000..5f4e4c3
--- /dev/null
+++ b/arch/mips/powertv/init.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@xxxxxxxx>
+ * Maciej W. Rozycki <macro@xxxxxxxx>
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * PROM library initialisation code.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#include <asm/bootinfo.h>
+#include <linux/io.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mach-powertv/asic.h>
+
+#include "init.h"
+
+int prom_argc;
+int *_prom_argv, *_prom_envp;
+unsigned long _prom_memsize;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension, if running in 64-bit mode.
+ */
+#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
+
+char *prom_getenv(char *envname)
+{
+ char *result = NULL;
+
+ if (_prom_envp != NULL) {
+ /*
+ * Return a pointer to the given environment variable.
+ * In 64-bit mode: we're using 64-bit pointers, but all pointers
+ * in the PROM structures are only 32-bit, so we need some
+ * workarounds, if we are running in 64-bit mode.
+ */
+ int i, index = 0;
+
+ i = strlen(envname);
+
+ while (prom_envp(index)) {
+ if (strncmp(envname, prom_envp(index), i) == 0) {
+ result = prom_envp(index + 1);
+ break;
+ }
+ index += 2;
+ }
+ }
+
+ return result;
+}
+
+/* TODO: Verify on linux-mips mailing list that the following two */
+/* functions are correct */
+/* TODO: Copy NMI and EJTAG exception vectors to memory from the */
+/* BootROM exception vectors. Flush their cache entries. test it. */
+
+static void __init mips_nmi_setup(void)
+{
+ void *base;
+#if defined(CONFIG_CPU_MIPS32_R1)
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa80) :
+ (void *)(CAC_BASE + 0x380);
+#elif defined(CONFIG_CPU_MIPS32_R2)
+ base = (void *)0xbfc00000;
+#else
+#error NMI exception handler address not defined
+#endif
+}
+
+static void __init mips_ejtag_setup(void)
+{
+ void *base;
+
+#if defined(CONFIG_CPU_MIPS32_R1)
+ base = cpu_has_veic ?
+ (void *)(CAC_BASE + 0xa00) :
+ (void *)(CAC_BASE + 0x300);
+#elif defined(CONFIG_CPU_MIPS32_R2)
+ base = (void *)0xbfc00480;
+#else
+#error EJTAG exception handler address not defined
+#endif
+}
+
+void __init prom_init(void)
+{
+ prom_argc = fw_arg0;
+ _prom_argv = (int *) fw_arg1;
+ _prom_envp = (int *) fw_arg2;
+ _prom_memsize = (unsigned long) fw_arg3;
+
+ board_nmi_handler_setup = mips_nmi_setup;
+ board_ejtag_handler_setup = mips_ejtag_setup;
+
+ pr_info("\nLINUX started...\n");
+ prom_init_cmdline();
+ configure_platform();
+ prom_meminit();
+
+#ifndef CONFIG_BOOTLOADER_DRIVER
+ pr_info("\nBootloader driver isn't loaded...\n");
+#endif
+}
diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h
new file mode 100644
index 0000000..332cfed
--- /dev/null
+++ b/arch/mips/powertv/init.h
@@ -0,0 +1,30 @@
+/*
+ * init.h
+ *
+ * Definitions from powertv init.c file
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: David VomLehn
+ */
+
+#ifndef _POWERTV_INIT_H
+#define _POWERTV_INIT_H
+extern int prom_argc;
+extern int *_prom_argv;
+extern unsigned long _prom_memsize;
+#endif
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
new file mode 100644
index 0000000..4ef689c
--- /dev/null
+++ b/arch/mips/powertv/memory.c
@@ -0,0 +1,184 @@
+/*
+ * Carsten Langgaard, carstenl@xxxxxxxx
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Apparently originally from arch/mips/malta-memory.c. Modified to work
+ * with the PowerTV bootloader.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mips-boards/prom.h>
+
+#include "init.h"
+
+/* Memory constants */
+#define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */
+#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */
+#define DEFAULT_MEMSIZE MEBIBYTE(256) /* If no memsize provided */
+#define LOW_MEM_MAX MEBIBYTE(252) /* Max usable low mem */
+#define RES_BOOTLDR_MEMSIZE MEBIBYTE(1) /* Memory reserved for bldr */
+#define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */
+#define PHYS_MEM_START 0x10000000 /* Start of physical memory */
+
+unsigned long ptv_memsize;
+
+void __init prom_meminit(void)
+{
+ char *memsize_str;
+ unsigned long memsize = 0;
+ unsigned int physend;
+ char cmdline[CL_SIZE], *ptr;
+ int low_mem;
+ int high_mem;
+
+ /* Check the command line first for a memsize directive */
+ strcpy(cmdline, arcs_cmdline);
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr) {
+ memsize = memparse(ptr + 8, &ptr);
+ } else {
+ /* otherwise look in the environment */
+ memsize_str = prom_getenv("memsize");
+
+ if (memsize_str != NULL) {
+ pr_info("prom memsize = %s\n", memsize_str);
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+
+ if (memsize == 0) {
+ if (_prom_memsize != 0) {
+ memsize = _prom_memsize;
+ pr_info("_prom_memsize = 0x%lx\n", memsize);
+ /* add in memory that the bootloader doesn't
+ * report */
+ memsize += BOOT_MEM_SIZE;
+ } else {
+ memsize = DEFAULT_MEMSIZE;
+ pr_info("Memsize not passed by bootloader, "
+ "defaulting to 0x%lx\n", memsize);
+ }
+ }
+ }
+
+ /* Store memsize for diagnostic purposes */
+ ptv_memsize = memsize;
+
+ physend = PFN_ALIGN(&_end) - 0x80000000;
+ if (memsize > LOW_MEM_MAX) {
+ low_mem = LOW_MEM_MAX;
+ high_mem = memsize - low_mem;
+ } else {
+ low_mem = memsize;
+ high_mem = 0;
+ }
+
+/*
+ * TODO: We will use the hard code for memory configuration until
+ * the bootloader releases their device tree to us.
+ */
+ /*
+ * Add the memory reserved for use by the bootloader to the
+ * memory map.
+ */
+ add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE,
+ BOOT_MEM_RESERVED);
+#ifdef CONFIG_HIGHMEM_256_128
+ /*
+ * Add memory in low for general use by the kernel and its friends
+ * (like drivers, applications, etc).
+ */
+ add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
+ LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
+ /*
+ * Add the memory reserved for reset vector.
+ */
+ add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
+ /*
+ * Add the memory reserved.
+ */
+ add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED);
+ /*
+ * Add memory in high for general use by the kernel and its friends
+ * (like drivers, applications, etc).
+ *
+ * 75MB is reserved for devices which are using the memory in high.
+ */
+ add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
+ BOOT_MEM_RAM);
+#elif defined CONFIG_HIGHMEM_128_128
+ /*
+ * Add memory in low for general use by the kernel and its friends
+ * (like drivers, applications, etc).
+ */
+ add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
+ MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
+ /*
+ * Add the memory reserved.
+ */
+ add_memory_region(PHYS_MEM_START + MEBIBYTE(128),
+ MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED);
+ /*
+ * Add memory in high for general use by the kernel and its friends
+ * (like drivers, applications, etc).
+ *
+ * 75MB is reserved for devices which are using the memory in high.
+ */
+ add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
+ BOOT_MEM_RAM);
+#else
+ /* Add low memory regions for either:
+ * - no-highmemory configuration case -OR-
+ * - highmemory "HIGHMEM_LOWBANK_ONLY" case
+ */
+ /*
+ * Add memory for general use by the kernel and its friends
+ * (like drivers, applications, etc).
+ */
+ add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
+ low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
+ /*
+ * Add the memory reserved for reset vector.
+ */
+ add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
+#endif
+}
+
+void __init prom_free_prom_memory(void)
+{
+ unsigned long addr;
+ int i;
+
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+ continue;
+
+ addr = boot_mem_map.map[i].addr;
+ free_init_pages("prom memory",
+ addr, addr + boot_mem_map.map[i].size);
+ }
+}
diff --git a/arch/mips/powertv/pci/Makefile b/arch/mips/powertv/pci/Makefile
new file mode 100644
index 0000000..9249164
--- /dev/null
+++ b/arch/mips/powertv/pci/Makefile
@@ -0,0 +1,28 @@
+# *****************************************************************************
+# Make file for PowerTV PCI driver
+#
+# Copyright (C) 2009 Scientific-Atlanta, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+# *****************************************************************************
+
+EXTRA_CFLAGS += -Wall -Werror
+
+obj-y :=
+
+obj-$(CONFIG_PCI) += fixup-powertv.o
+
+
diff --git a/arch/mips/powertv/pci/fixup-powertv.c b/arch/mips/powertv/pci/fixup-powertv.c
new file mode 100644
index 0000000..726bc2e
--- /dev/null
+++ b/arch/mips/powertv/pci/fixup-powertv.c
@@ -0,0 +1,36 @@
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/mach-powertv/interrupts.h>
+#include "powertv-pci.h"
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return asic_pcie_map_irq(dev, slot, pin);
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/*
+ * asic_pcie_map_irq
+ *
+ * Parameters:
+ * *dev - pointer to a pci_dev structure (not used)
+ * slot - slot number (not used)
+ * pin - pin number (not used)
+ *
+ * Return Value:
+ * Returns: IRQ number (always the PCI Express IRQ number)
+ *
+ * Description:
+ * asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt.
+ *
+ */
+int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return irq_pciexp;
+}
+EXPORT_SYMBOL(asic_pcie_map_irq);
diff --git a/arch/mips/powertv/pci/powertv-pci.h b/arch/mips/powertv/pci/powertv-pci.h
new file mode 100644
index 0000000..1b5886b
--- /dev/null
+++ b/arch/mips/powertv/pci/powertv-pci.h
@@ -0,0 +1,31 @@
+/*
+ * powertv-pci.c
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+/*
+ * Local definitions for the powertv PCI code
+ */
+
+#ifndef _POWERTV_PCI_POWERTV_PCI_H_
+#define _POWERTV_PCI_POWERTV_PCI_H_
+extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+extern int asic_pcie_init(void);
+extern int asic_pcie_init(void);
+
+extern int log_level;
+#endif
diff --git a/arch/mips/powertv/powertv-clock.h b/arch/mips/powertv/powertv-clock.h
new file mode 100644
index 0000000..5c1f093
--- /dev/null
+++ b/arch/mips/powertv/powertv-clock.h
@@ -0,0 +1,30 @@
+/*
+ * powertv-clock.h
+ *
+ * Definitions for clocks
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: David VomLehn
+ */
+
+#ifndef _POWERTV_POWERTV_CLOCK_H
+#define _POWERTV_POWERTV_CLOCK_H
+extern int powertv_clockevent_init(void);
+extern void powertv_clocksource_init(void);
+extern unsigned int mips_get_pll_freq(void);
+#endif
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
new file mode 100644
index 0000000..bd8ebf1
--- /dev/null
+++ b/arch/mips/powertv/powertv_setup.c
@@ -0,0 +1,351 @@
+/*
+ * Carsten Langgaard, carstenl@xxxxxxxx
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/screen_info.h>
+#include <linux/notifier.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/ctype.h>
+
+#include <linux/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/dma.h>
+#include <linux/time.h>
+#include <asm/traps.h>
+#include <asm/asm-offsets.h>
+#include "reset.h"
+
+#define VAL(n) STR(n)
+
+/*
+ * Macros for loading addresses and storing registers:
+ * PTR_LA Load the address into a register
+ * LONG_S Store the full width of the given register.
+ * LONG_L Load the full width of the given register
+ * PTR_ADDIU Add a constant value to a register used as a pointer
+ * REG_SIZE Number of 8-bit bytes in a full width register
+ */
+#ifdef CONFIG_64BIT
+#warning TODO: 64-bit code needs to be verified
+#define PTR_LA "dla "
+#define LONG_S "sd "
+#define LONG_L "ld "
+#define PTR_ADDIU "daddiu "
+#define REG_SIZE "8" /* In bytes */
+#endif
+
+#ifdef CONFIG_32BIT
+#define PTR_LA "la "
+#define LONG_S "sw "
+#define LONG_L "lw "
+#define PTR_ADDIU "addiu "
+#define REG_SIZE "4" /* In bytes */
+#endif
+
+static struct pt_regs die_regs;
+static bool have_die_regs;
+
+static void register_panic_notifier(void);
+static int panic_handler(struct notifier_block *notifier_block,
+ unsigned long event, void *cause_string);
+
+const char *get_system_type(void)
+{
+ return "PowerTV";
+}
+
+void __init plat_mem_setup(void)
+{
+ panic_on_oops = 1;
+ register_panic_notifier();
+
+#if 0
+ mips_pcibios_init();
+#endif
+ mips_reboot_setup();
+}
+
+/*
+ * Install a panic notifier for platform-specific diagnostics
+ */
+static void register_panic_notifier()
+{
+ static struct notifier_block panic_notifier = {
+ .notifier_call = panic_handler,
+ .next = NULL,
+ .priority = INT_MAX
+ };
+ atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier);
+}
+
+static int panic_handler(struct notifier_block *notifier_block,
+ unsigned long event, void *cause_string)
+{
+ struct pt_regs my_regs;
+
+ /* Save all of the registers */
+ {
+ unsigned long at, v0, v1; /* Must be on the stack */
+
+ /* Start by saving $at and v0 on the stack. We use $at
+ * ourselves, but it looks like the compiler may use v0 or v1
+ * to load the address of the pt_regs structure. We'll come
+ * back later to store the registers in the pt_regs
+ * structure. */
+ __asm__ __volatile__ (
+ ".set noat\n"
+ LONG_S "$at, %[at]\n"
+ LONG_S "$2, %[v0]\n"
+ LONG_S "$3, %[v1]\n"
+ :
+ [at] "=m" (at),
+ [v0] "=m" (v0),
+ [v1] "=m" (v1)
+ :
+ : "at"
+ );
+
+ __asm__ __volatile__ (
+ ".set noat\n"
+ "move $at, %[pt_regs]\n"
+
+ /* Argument registers */
+ LONG_S "$4, " VAL(PT_R4) "($at)\n"
+ LONG_S "$5, " VAL(PT_R5) "($at)\n"
+ LONG_S "$6, " VAL(PT_R6) "($at)\n"
+ LONG_S "$7, " VAL(PT_R7) "($at)\n"
+
+ /* Temporary regs */
+ LONG_S "$8, " VAL(PT_R8) "($at)\n"
+ LONG_S "$9, " VAL(PT_R9) "($at)\n"
+ LONG_S "$10, " VAL(PT_R10) "($at)\n"
+ LONG_S "$11, " VAL(PT_R11) "($at)\n"
+ LONG_S "$12, " VAL(PT_R12) "($at)\n"
+ LONG_S "$13, " VAL(PT_R13) "($at)\n"
+ LONG_S "$14, " VAL(PT_R14) "($at)\n"
+ LONG_S "$15, " VAL(PT_R15) "($at)\n"
+
+ /* "Saved" registers */
+ LONG_S "$16, " VAL(PT_R16) "($at)\n"
+ LONG_S "$17, " VAL(PT_R17) "($at)\n"
+ LONG_S "$18, " VAL(PT_R18) "($at)\n"
+ LONG_S "$19, " VAL(PT_R19) "($at)\n"
+ LONG_S "$20, " VAL(PT_R20) "($at)\n"
+ LONG_S "$21, " VAL(PT_R21) "($at)\n"
+ LONG_S "$22, " VAL(PT_R22) "($at)\n"
+ LONG_S "$23, " VAL(PT_R23) "($at)\n"
+
+ /* Add'l temp regs */
+ LONG_S "$24, " VAL(PT_R24) "($at)\n"
+ LONG_S "$25, " VAL(PT_R25) "($at)\n"
+
+ /* Kernel temp regs */
+ LONG_S "$26, " VAL(PT_R26) "($at)\n"
+ LONG_S "$27, " VAL(PT_R27) "($at)\n"
+
+ /* Global pointer, stack pointer, frame pointer and
+ * return address */
+ LONG_S "$gp, " VAL(PT_R28) "($at)\n"
+ LONG_S "$sp, " VAL(PT_R29) "($at)\n"
+ LONG_S "$fp, " VAL(PT_R30) "($at)\n"
+ LONG_S "$ra, " VAL(PT_R31) "($at)\n"
+
+ /* Now we can get the $at and v0 registers back and
+ * store them */
+ LONG_L "$8, %[at]\n"
+ LONG_S "$8, " VAL(PT_R1) "($at)\n"
+ LONG_L "$8, %[v0]\n"
+ LONG_S "$8, " VAL(PT_R2) "($at)\n"
+ LONG_L "$8, %[v1]\n"
+ LONG_S "$8, " VAL(PT_R3) "($at)\n"
+ :
+ :
+ [at] "m" (at),
+ [v0] "m" (v0),
+ [v1] "m" (v1),
+ [pt_regs] "r" (&my_regs)
+ : "at", "t0"
+ );
+
+ /* Set the current EPC value to be the current location in this
+ * function */
+ __asm__ __volatile__ (
+ ".set noat\n"
+ "1:\n"
+ PTR_LA "$at, 1b\n"
+ LONG_S "$at, %[cp0_epc]\n"
+ :
+ [cp0_epc] "=m" (my_regs.cp0_epc)
+ :
+ : "at"
+ );
+
+ my_regs.cp0_cause = read_c0_cause();
+ my_regs.cp0_status = read_c0_status();
+ }
+
+#ifdef CONFIG_DIAGNOSTICS
+ failure_report((char *) cause_string,
+ have_die_regs ? &die_regs : &my_regs);
+ have_die_regs = false;
+#else
+ pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... "
+ "zzzz... \n");
+#endif
+
+ return NOTIFY_DONE;
+}
+
+/**
+ * Platform-specific handling of oops
+ * @str: Pointer to the oops string
+ * @regs: Pointer to the oops registers
+ * All we do here is to save the registers for subsequent printing through
+ * the panic notifier.
+ */
+void platform_die(const char *str, const struct pt_regs *regs)
+{
+ /* If we already have saved registers, don't overwrite them as they
+ * they apply to the initial fault */
+
+ if (!have_die_regs) {
+ have_die_regs = true;
+ die_regs = *regs;
+ }
+}
+
+/* Information about the RF MAC address, if one was supplied on the
+ * command line. */
+static bool have_rfmac;
+static u8 rfmac[ETH_ALEN];
+
+static int rfmac_param(char *p)
+{
+ u8 *q;
+ bool is_high_nibble;
+ int c;
+
+ /* Skip a leading "0x", if present */
+ if (*p == '0' && *(p+1) == 'x')
+ p += 2;
+
+ q = rfmac;
+ is_high_nibble = true;
+
+ for (c = (unsigned char) *p++;
+ isxdigit(c) && q - rfmac < ETH_ALEN;
+ c = (unsigned char) *p++) {
+ int nibble;
+
+ nibble = (isdigit(c) ? (c - '0') :
+ (isupper(c) ? c - 'A' + 10 : c - 'a' + 10));
+
+ if (is_high_nibble)
+ *q = nibble << 4;
+ else
+ *q++ |= nibble;
+
+ is_high_nibble = !is_high_nibble;
+ }
+
+ /* If we parsed all the way to the end of the parameter value and
+ * parsed all ETH_ALEN bytes, we have a usable RF MAC address */
+ have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN);
+
+ return 0;
+}
+
+early_param("rfmac", rfmac_param);
+
+/*
+ * Generate an Ethernet MAC address that has a good chance of being unique.
+ * @addr: Pointer to six-byte array containing the Ethernet address
+ * Generates an Ethernet MAC address that is highly likely to be unique for
+ * this particular system on a network with other systems of the same type.
+ *
+ * The problem we are solving is that, when random_ether_addr() is used to
+ * generate MAC addresses at startup, there isn't much entropy for the random
+ * number generator to use and the addresses it produces are fairly likely to
+ * be the same as those of other identical systems on the same local network.
+ * This is true even for relatively small numbers of systems (for the reason
+ * why, see the Wikipedia entry for "Birthday problem" at:
+ * http://en.wikipedia.org/wiki/Birthday_problem
+ *
+ * The good news is that we already have a MAC address known to be unique, the
+ * RF MAC address. The bad news is that this address is already in use on the
+ * RF interface. Worse, the obvious trick, taking the RF MAC address and
+ * turning on the locally managed bit, has already been used for other devices.
+ * Still, this does give us something to work with.
+ *
+ * The approach we take is:
+ * 1. If we can't get the RF MAC Address, just call random_ether_addr.
+ * 2. Use the 24-bit NIC-specific bits of the RF MAC address as the last 24
+ * bits of the new address. This is very likely to be unique, except for
+ * the current box.
+ * 3. To avoid using addresses already on the current box, we set the top
+ * six bits of the address with a value different from any currently
+ * registered Scientific Atlanta organizationally unique identifyer
+ * (OUI). This avoids duplication with any addresses on the system that
+ * were generated from valid Scientific Atlanta-registered address by
+ * simply flipping the locally managed bit.
+ * 4. We aren't generating a multicast address, so we leave the multicast
+ * bit off. Since we aren't using a registered address, we have to set
+ * the locally managed bit.
+ * 5. We then randomly generate the remaining 16-bits. This does two
+ * things:
+ * a. It allows us to call this function for more than one device
+ * in this system
+ * b. It ensures that things will probably still work even if
+ * some device on the device network has a locally managed
+ * address that matches the top six bits from step 2.
+ */
+void platform_random_ether_addr(u8 addr[ETH_ALEN])
+{
+ const int num_random_bytes = 2;
+ const unsigned char non_sciatl_oui_bits = 0xc0u;
+ const unsigned char mac_addr_locally_managed = (1 << 1);
+
+ if (!have_rfmac) {
+ pr_warning("rfmac not available on command line; "
+ "generating random MAC address\n");
+ random_ether_addr(addr);
+ }
+
+ else {
+ int i;
+
+ /* Set the first byte to something that won't match a Scientific
+ * Atlanta OUI, is locally managed, and isn't a multicast
+ * address */
+ addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed;
+
+ /* Get some bytes of random address information */
+ get_random_bytes(&addr[1], num_random_bytes);
+
+ /* Copy over the NIC-specific bits of the RF MAC address */
+ for (i = 1 + num_random_bytes; i < ETH_ALEN; i++)
+ addr[i] = rfmac[i];
+ }
+}
diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c
new file mode 100644
index 0000000..ec8fe80
--- /dev/null
+++ b/arch/mips/powertv/reset.c
@@ -0,0 +1,70 @@
+/*
+ * Carsten Langgaard, carstenl@xxxxxxxx
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ */
+#include <linux/pm.h>
+
+#include <linux/io.h>
+#include <asm/reboot.h> /* Not included by linux/reboot.h */
+
+#ifdef CONFIG_BOOTLOADER_DRIVER
+#include <asm/mach-powertv/kbldr.h>
+#endif
+
+#include <asm/mach-powertv/asic_regs.h>
+#include "reset.h"
+
+static void mips_machine_restart(char *command);
+static void mips_machine_halt(void);
+
+static void mips_machine_restart(char *command)
+{
+#ifdef CONFIG_BOOTLOADER_DRIVER
+ /*
+ * Call the bootloader's reset function to ensure
+ * that persistent data is flushed before hard reset
+ */
+ kbldr_SetCauseAndReset();
+#else
+ writel(0x1, asic_reg_addr(watchdog));
+#endif
+}
+
+static void mips_machine_halt(void)
+{
+#ifdef CONFIG_BOOTLOADER_DRIVER
+ /*
+ * Call the bootloader's reset function to ensure
+ * that persistent data is flushed before hard reset
+ */
+ kbldr_SetCauseAndReset();
+#else
+ writel(0x1, asic_reg_addr(watchdog));
+#endif
+}
+
+void mips_reboot_setup(void)
+{
+ _machine_restart = mips_machine_restart;
+ _machine_halt = mips_machine_halt;
+ pm_power_off = mips_machine_halt;
+}
diff --git a/arch/mips/powertv/reset.h b/arch/mips/powertv/reset.h
new file mode 100644
index 0000000..93d58b9
--- /dev/null
+++ b/arch/mips/powertv/reset.h
@@ -0,0 +1,28 @@
+/*
+ * reset.h
+ *
+ * Definitions from powertv reset.c file
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author: David VomLehn
+ */
+
+#ifndef _POWERTV_POWERTV_RESET_H
+#define _POWERTV_POWERTV_RESET_H
+extern void mips_reboot_setup(void);
+#endif
diff --git a/arch/mips/powertv/time.c b/arch/mips/powertv/time.c
new file mode 100644
index 0000000..1e3e54e
--- /dev/null
+++ b/arch/mips/powertv/time.c
@@ -0,0 +1,30 @@
+/*
+ * Carsten Langgaard, carstenl@xxxxxxxx
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Portions copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <asm/time.h>
+
+#include "powertv-clock.h"
+
+void __init plat_time_init(void)
+{
+ powertv_clocksource_init();
+ powertv_clockevent_init();
+}
