From: Wu Zhangjin <wuzj@xxxxxxxxxx>
in loongson2e, there is an internal bonito64 compatiable north bridge,
but in loongson2f and the later loongson revisions, this will change a
lot, so, remove reference from bonito64.h and create a new loongson.h is
better.
Signed-off-by: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
---
arch/mips/include/asm/mach-loongson/loongson.h | 194 +++++++++++++++++++++++-
arch/mips/include/asm/mach-loongson/pci.h | 2 +-
arch/mips/include/asm/mips-boards/bonito64.h | 5 -
arch/mips/loongson/fuloong-2e/bonito-irq.c | 10 +-
arch/mips/loongson/fuloong-2e/irq.c | 23 ++--
arch/mips/loongson/fuloong-2e/pci.c | 15 +-
arch/mips/pci/Makefile | 2 +-
arch/mips/pci/fixup-fuloong2e.c | 5 +-
arch/mips/pci/ops-bonito64.c | 7 -
arch/mips/pci/ops-fuloong2e.c | 160 +++++++++++++++++++
10 files changed, 382 insertions(+), 41 deletions(-)
create mode 100644 arch/mips/pci/ops-fuloong2e.c
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index 18ebef1..26308b5 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -1,7 +1,19 @@
/*
- * loongson-specific header file
+ * Copyright (c) 2009 Philippe Vachon <philippe@xxxxxxxxx>
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
*/
+#ifndef __LOONGSON_H
+#define __LOONGSON_H
+
/* loongson internal northbridge initialization */
extern void bonito_irq_init(void);
@@ -12,3 +24,183 @@ extern unsigned long memsize, highmemsize;
/* loongson-based machines specific reboot setup */
extern void loongson_reboot_setup(void);
+#define LOONGSON_REG(x) \
+ (*(u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
+#define LOONGSON_IRQ_BASE 32
+
+#define LOONGSON_FLASH_BASE 0x1c000000
+#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */
+#define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1)
+
+#define LOONGSON_LIO0_BASE 0x1e000000
+#define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */
+#define LOONGSON_LIO0_TOP (LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1)
+
+#define LOONGSON_BOOT_BASE 0x1fc00000
+#define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */
+#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1)
+#define LOONGSON_REG_BASE 0x1fe00000
+#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
+#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+
+#define LOONGSON_LIO1_BASE 0x1ff00000
+#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */
+#define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1)
+
+#define LOONGSON_PCILO0_BASE 0x10000000
+#define LOONGSON_PCILO1_BASE 0x14000000
+#define LOONGSON_PCILO2_BASE 0x18000000
+#define LOONGSON_PCILO_BASE LOONGSON_PCILO0_BASE
+#define LOONGSON_PCILO_SIZE 0x0c000000 /* 64M * 3 */
+#define LOONGSON_PCILO_TOP (LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1)
+
+#define LOONGSON_PCICFG_BASE 0x1fe80000
+#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */
+#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
+#define LOONGSON_PCIIO_BASE 0x1fd00000
+#define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */
+#define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
+
+/* Loongson Register Bases */
+
+#define LOONGSON_PCICONFIGBASE 0x00
+#define LOONGSON_REGBASE 0x100
+
+/* PCI Configuration Registers */
+
+#define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x))
+#define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00)
+#define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04)
+#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08)
+#define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c)
+#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10)
+#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14)
+#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18)
+#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c)
+#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20)
+#define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30)
+#define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c)
+
+#define LOONGSON_PCI_ISR4C LOONGSON_PCI_REG(0x4c)
+
+#define LOONGSON_PCICMD_PERR_CLR 0x80000000
+#define LOONGSON_PCICMD_SERR_CLR 0x40000000
+#define LOONGSON_PCICMD_MABORT_CLR 0x20000000
+#define LOONGSON_PCICMD_MTABORT_CLR 0x10000000
+#define LOONGSON_PCICMD_TABORT_CLR 0x08000000
+#define LOONGSON_PCICMD_MPERR_CLR 0x01000000
+#define LOONGSON_PCICMD_PERRRESPEN 0x00000040
+#define LOONGSON_PCICMD_ASTEPEN 0x00000080
+#define LOONGSON_PCICMD_SERREN 0x00000100
+#define LOONGSON_PCILTIMER_BUSLATENCY 0x0000ff00
+#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT 8
+
+/* Loongson h/w Configuration */
+
+#define LOONGSON_GENCFG_OFFSET 0x4
+#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET)
+
+#define LOONGSON_GENCFG_DEBUGMODE 0x00000001
+#define LOONGSON_GENCFG_SNOOPEN 0x00000002
+#define LOONGSON_GENCFG_CPUSELFRESET 0x00000004
+
+#define LOONGSON_GENCFG_FORCE_IRQA 0x00000008
+#define LOONGSON_GENCFG_IRQA_ISOUT 0x00000010
+#define LOONGSON_GENCFG_IRQA_FROM_INT1 0x00000020
+#define LOONGSON_GENCFG_BYTESWAP 0x00000040
+
+#define LOONGSON_GENCFG_UNCACHED 0x00000080
+#define LOONGSON_GENCFG_PREFETCHEN 0x00000100
+#define LOONGSON_GENCFG_WBEHINDEN 0x00000200
+#define LOONGSON_GENCFG_CACHEALG 0x00000c00
+#define LOONGSON_GENCFG_CACHEALG_SHIFT 10
+#define LOONGSON_GENCFG_PCIQUEUE 0x00001000
+#define LOONGSON_GENCFG_CACHESTOP 0x00002000
+#define LOONGSON_GENCFG_MSTRBYTESWAP 0x00004000
+#define LOONGSON_GENCFG_BUSERREN 0x00008000
+#define LOONGSON_GENCFG_NORETRYTIMEOUT 0x00010000
+#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT 0x00020000
+
+/* PCI address map control */
+
+#define LOONGSON_PCIMAP LOONGSON_REG(LOONGSON_REGBASE + 0x10)
+#define LOONGSON_PCIMEMBASECFG LOONGSON_REG(LOONGSON_REGBASE + 0x14)
+#define LOONGSON_PCIMAP_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x18)
+
+/* GPIO Regs - r/w */
+
+#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c)
+#define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24)
+#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28)
+#define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30)
+#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34)
+#define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38)
+#define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c)
+
+/* ICU */
+#define LOONGSON_ICU_MBOXES 0x0000000f
+#define LOONGSON_ICU_MBOXES_SHIFT 0
+#define LOONGSON_ICU_DMARDY 0x00000010
+#define LOONGSON_ICU_DMAEMPTY 0x00000020
+#define LOONGSON_ICU_COPYRDY 0x00000040
+#define LOONGSON_ICU_COPYEMPTY 0x00000080
+#define LOONGSON_ICU_COPYERR 0x00000100
+#define LOONGSON_ICU_PCIIRQ 0x00000200
+#define LOONGSON_ICU_MASTERERR 0x00000400
+#define LOONGSON_ICU_SYSTEMERR 0x00000800
+#define LOONGSON_ICU_DRAMPERR 0x00001000
+#define LOONGSON_ICU_RETRYERR 0x00002000
+#define LOONGSON_ICU_GPIOS 0x01ff0000
+#define LOONGSON_ICU_GPIOS_SHIFT 16
+#define LOONGSON_ICU_GPINS 0x7e000000
+#define LOONGSON_ICU_GPINS_SHIFT 25
+#define LOONGSON_ICU_MBOX(N) (1<<(LOONGSON_ICU_MBOXES_SHIFT+(N)))
+#define LOONGSON_ICU_GPIO(N) (1<<(LOONGSON_ICU_GPIOS_SHIFT+(N)))
+#define LOONGSON_ICU_GPIN(N) (1<<(LOONGSON_ICU_GPINS_SHIFT+(N)))
+
+/* PCI prefetch window base & mask */
+
+#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40)
+#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44)
+#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48)
+#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c)
+
+/* PCI_Hit*_Sel_* */
+
+#define LOONGSON_PCI_HIT0_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x64)
+
+/* PXArb Config & Status */
+
+#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
+
+/* Chip Config */
+#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80)
+
+/* pcimap */
+
+#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f
+#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT 0
+#define LOONGSON_PCIMAP_PCIMAP_LO1 0x00000fc0
+#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT 6
+#define LOONGSON_PCIMAP_PCIMAP_LO2 0x0003f000
+#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT 12
+#define LOONGSON_PCIMAP_PCIMAP_2 0x00040000
+#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \
+ ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+#endif /* __LOONGSON_H */
+
diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h
index e685096..9a351be 100644
--- a/arch/mips/include/asm/mach-loongson/pci.h
+++ b/arch/mips/include/asm/mach-loongson/pci.h
@@ -22,7 +22,7 @@
#ifndef _LOONGSON_PCI_H_
#define _LOONGSON_PCI_H_
-extern struct pci_ops bonito64_pci_ops;
+extern struct pci_ops loongson_pci_ops;
#define LOONGSON2E_PCI_MEM_START 0x14000000UL
#define LOONGSON2E_PCI_MEM_END 0x1fffffffUL
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index a576ce0..d14e2ad 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -26,11 +26,6 @@
/* offsets from base register */
#define BONITO(x) (x)
-#elif defined(CONFIG_LEMOTE_FULOONG2E)
-
-#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
-#define BONITO_IRQ_BASE 32
-
#else
/*
diff --git a/arch/mips/loongson/fuloong-2e/bonito-irq.c b/arch/mips/loongson/fuloong-2e/bonito-irq.c
index 5adf373..91b9c08 100644
--- a/arch/mips/loongson/fuloong-2e/bonito-irq.c
+++ b/arch/mips/loongson/fuloong-2e/bonito-irq.c
@@ -34,18 +34,18 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <asm/mips-boards/bonito64.h>
+#include <loongson.h>
static inline void bonito_irq_enable(unsigned int irq)
{
- BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE));
+ LOONGSON_INTENSET = (1 << (irq - LOONGSON_IRQ_BASE));
mmiowb();
}
static inline void bonito_irq_disable(unsigned int irq)
{
- BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE));
+ LOONGSON_INTENCLR = (1 << (irq - LOONGSON_IRQ_BASE));
mmiowb();
}
@@ -66,8 +66,8 @@ void bonito_irq_init(void)
{
u32 i;
- for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
+ for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
- setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
+ setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
}
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
index 1b0d491..20030c0 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -32,7 +32,6 @@
#include <asm/irq_cpu.h>
#include <asm/i8259.h>
#include <asm/mipsregs.h>
-#include <asm/mips-boards/bonito64.h>
#include <loongson.h>
@@ -45,21 +44,21 @@ static void bonito_irqdispatch(void)
int i;
/* workaround the IO dma problem: let cpu looping to allow DMA finish */
- int_status = BONITO_INTISR;
+ int_status = LOONGSON_INTISR;
if (int_status & (1 << 10)) {
while (int_status & (1 << 10)) {
udelay(1);
- int_status = BONITO_INTISR;
+ int_status = LOONGSON_INTISR;
}
}
/* Get pending sources, masked by current enables */
- int_status = BONITO_INTISR & BONITO_INTEN;
+ int_status = LOONGSON_INTISR & LOONGSON_INTEN;
if (int_status != 0) {
i = __ffs(int_status);
int_status &= ~(1 << i);
- do_IRQ(BONITO_IRQ_BASE + i);
+ do_IRQ(LOONGSON_IRQ_BASE + i);
}
}
@@ -103,15 +102,15 @@ void __init arch_init_irq(void)
local_irq_disable();
/* most bonito irq should be level triggered */
- BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
- BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
- BONITO_INTSTEER = 0;
+ LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
+ LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
+ LOONGSON_INTSTEER = 0;
/*
* Mask out all interrupt by writing "1" to all bit position in
* the interrupt reset reg.
*/
- BONITO_INTENCLR = ~0;
+ LOONGSON_INTENCLR = ~0;
/* init all controller
* 0-15 ------> i8259 interrupt
@@ -125,10 +124,10 @@ void __init arch_init_irq(void)
bonito_irq_init();
/*
- printk("GPIODATA=%x, GPIOIE=%x\n", BONITO_GPIODATA, BONITO_GPIOIE);
+ printk("GPIODATA=%x, GPIOIE=%x\n", LOONGSON_GPIODATA, LOONGSON_GPIOIE);
printk("INTEN=%x, INTSET=%x, INTCLR=%x, INTISR=%x\n",
- BONITO_INTEN, BONITO_INTENSET,
- BONITO_INTENCLR, BONITO_INTISR);
+ LOONGSON_INTEN, LOONGSON_INTENSET,
+ LOONGSON_INTENCLR, LOONGSON_INTISR);
*/
/* bonito irq at IP2 */
diff --git a/arch/mips/loongson/fuloong-2e/pci.c b/arch/mips/loongson/fuloong-2e/pci.c
index 4c4bc07..1d81110 100644
--- a/arch/mips/loongson/fuloong-2e/pci.c
+++ b/arch/mips/loongson/fuloong-2e/pci.c
@@ -29,7 +29,8 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/mips-boards/bonito64.h>
+
+#include <loongson.h>
#include <pci.h>
static struct resource loongson2e_pci_mem_resource = {
@@ -47,7 +48,7 @@ static struct resource loongson2e_pci_io_resource = {
};
static struct pci_controller loongson2e_pci_controller = {
- .pci_ops = &bonito64_pci_ops,
+ .pci_ops = &loongson_pci_ops,
.io_resource = &loongson2e_pci_io_resource,
.mem_resource = &loongson2e_pci_mem_resource,
.mem_offset = 0x00000000UL,
@@ -64,17 +65,17 @@ static void __init ict_pcimap(void)
* pcimap: bit18,pcimap_2; bit[17-12],lo2;bit[11-6],lo1;bit[5-0],lo0
*/
/* 1,00 0110 ,0001 01,00 0000 */
- BONITO_PCIMAP = 0x46140;
+ LOONGSON_PCIMAP = 0x46140;
/* 1, 00 0010, 0000,01, 00 0000 */
- /* BONITO_PCIMAP = 0x42040; */
+ /* LOONGSON_PCIMAP = 0x42040; */
/*
* PCI to local mapping: [2G,2G+256M] -> [0,256M]
*/
- BONITO_PCIBASE0 = 0x80000000;
- BONITO_PCIBASE1 = 0x00800000;
- BONITO_PCIBASE2 = 0x90000000;
+ LOONGSON_PCIBASE0 = 0x80000000;
+ LOONGSON_PCIBASE1 = 0x00800000;
+ LOONGSON_PCIBASE2 = 0x90000000;
}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 1c66fc0..a0cc238 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
-obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-bonito64.o
+obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-fuloong2e.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c
index bd26008..0e3c5de 100644
--- a/arch/mips/pci/fixup-fuloong2e.c
+++ b/arch/mips/pci/fixup-fuloong2e.c
@@ -31,7 +31,8 @@
*/
#include <linux/init.h>
#include <linux/pci.h>
-#include <asm/mips-boards/bonito64.h>
+
+#include <loongson.h>
/* South bridge slot number is set by the pci probe process */
static u8 sb_slot = 5;
@@ -53,7 +54,7 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
break;
}
} else {
- irq = BONITO_IRQ_BASE + 25 + pin;
+ irq = LOONGSON_IRQ_BASE + 25 + pin;
}
return irq;
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index e3b091d..39de8cb 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -29,14 +29,9 @@
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
-#ifdef CONFIG_LEMOTE_FULOONG2E
-#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset))
-#define ID_SEL_BEGIN 11
-#else
#define CFG_SPACE_REG(offset) \
(void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset))
#define ID_SEL_BEGIN 10
-#endif
#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
@@ -78,11 +73,9 @@ static int bonito64_pcibios_config_access(unsigned char access_type,
addrp = CFG_SPACE_REG(addr & 0xffff);
if (access_type == PCI_ACCESS_WRITE) {
writel(cpu_to_le32(*data), addrp);
-#ifndef CONFIG_LEMOTE_FULOONG2E
/* Wait till done */
while (BONITO_PCIMSTAT & 0xF)
;
-#endif
} else {
*data = le32_to_cpu(readl(addrp));
}
diff --git a/arch/mips/pci/ops-fuloong2e.c b/arch/mips/pci/ops-fuloong2e.c
new file mode 100644
index 0000000..6bb7919
--- /dev/null
+++ b/arch/mips/pci/ops-fuloong2e.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@xxxxxxxx>
+ * Maciej W. Rozycki <macro@xxxxxxxx>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * MIPS boards specific PCI support.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <loongson.h>
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+#define CFG_SPACE_REG(offset) \
+ (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset))
+#define ID_SEL_BEGIN 11
+#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
+
+
+static int loongson_pcibios_config_access(unsigned char access_type,
+ struct pci_bus *bus,
+ unsigned int devfn, int where,
+ u32 *data)
+{
+ u32 busnum = bus->number;
+ u32 addr, type;
+ u32 dummy;
+ void *addrp;
+ int device = PCI_SLOT(devfn);
+ int function = PCI_FUNC(devfn);
+ int reg = where & ~3;
+
+ if (busnum == 0) {
+ /* Type 0 configuration for onboard PCI bus */
+ if (device > MAX_DEV_NUM)
+ return -1;
+
+ addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
+ type = 0;
+ } else {
+ /* Type 1 configuration for offboard PCI bus */
+ addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+ type = 0x10000;
+ }
+
+ /* Clear aborts */
+ LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \
+ LOONGSON_PCICMD_MTABORT_CLR;
+
+ LOONGSON_PCIMAP_CFG = (addr >> 16) | type;
+
+ /* Flush Bonito register block */
+ dummy = LOONGSON_PCIMAP_CFG;
+ mmiowb();
+
+ addrp = CFG_SPACE_REG(addr & 0xffff);
+ if (access_type == PCI_ACCESS_WRITE)
+ writel(cpu_to_le32(*data), addrp);
+ else
+ *data = le32_to_cpu(readl(addrp));
+
+ /* Detect Master/Target abort */
+ if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR |
+ LOONGSON_PCICMD_MTABORT_CLR)) {
+ /* Error occurred */
+
+ /* Clear bits */
+ LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR |
+ LOONGSON_PCICMD_MTABORT_CLR);
+
+ return -1;
+ }
+
+ return 0;
+
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
+ &data))
+ return -1;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (size == 4)
+ data = val;
+ else {
+ if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+ where, &data))
+ return -1;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ }
+
+ if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
+ &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops loongson_pci_ops = {
+ .read = loongson_pcibios_read,
+ .write = loongson_pcibios_write
+};
--
1.6.0.4
