Not every board may want to register all available alchemy drivers; besides it makes passing platform_data ugly since the device registration and its platform data are in separate files. I don't like that. Signed-off-by: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx> --- arch/mips/alchemy/common/Makefile | 2 +- arch/mips/alchemy/devboards/Makefile | 2 +- arch/mips/alchemy/mtx-1/Makefile | 2 +- arch/mips/alchemy/xxs1500/Makefile | 1 + 4 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index d50d476..941229f 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -6,7 +6,7 @@ # obj-y += prom.o irq.o puts.o time.o reset.o \ - clocks.o platform.o power.o setup.o \ + clocks.o power.o setup.o \ sleeper.o dma.o dbdma.o gpio.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index 730f9f2..7b36ba4 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -2,7 +2,7 @@ # Alchemy Develboards # -obj-y += prom.o +obj-y += prom.o ../common/platform.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MIPS_PB1000) += pb1000/ obj-$(CONFIG_MIPS_PB1100) += pb1100/ diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile index 7c67b3d..ef98975 100644 --- a/arch/mips/alchemy/mtx-1/Makefile +++ b/arch/mips/alchemy/mtx-1/Makefile @@ -7,6 +7,6 @@ # lib-y := init.o board_setup.o irqmap.o -obj-y := platform.o +obj-y := platform.o ../common/platform.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile index db3c526..619a76c 100644 --- a/arch/mips/alchemy/xxs1500/Makefile +++ b/arch/mips/alchemy/xxs1500/Makefile @@ -6,3 +6,4 @@ # lib-y := init.o board_setup.o irqmap.o +obj-y += ../common/platform.o -- 1.6.2
