__do_IRQ() is deprecated since a long time and there are plans to remove
it for 2.6.30. The MIPS platforms seem to fall into three classes:
o Platforms setting CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ to explicitly disable
__do_IRQ():
capcella_defconfig, cobalt_defconfig, e55_defconfig,
fulong_defconfig, ip27_defconfig, jazz_defconfig, jmr3927_defconfig,
lasat_defconfig, mpc30x_defconfig, pnx8335-stb225_defconfig,
pnx8550-jbs_defconfig, pnx8550-stb810_defconfig, rb532_defconfig,
rbtx49xx_defconfig, tb0219_defconfig, tb0226_defconfig,
tb0287_defconfig and workpad_defconfig.
o Platforms that don't set CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ but don't
seem to use __do_IRQ():
bcm47xx_defconfig, cavium-octeon_defconfig, excite_defconfig,
ip22_defconfig, ip28_defconfig, msp71xx_defconfig, wrppmc_defconfig,
o Platforms that still seem to rely on __do_IRQ():
o All Sibyte platforms:
bigsur_defconfig and sb1250-swarm_defconfig
o All Alchemy platforms:
db1000_defconfig, db1100_defconfig, db1200_defconfig, db1500_defconfig,
db1550_defconfig, mtx1_defconfig, pb1100_defconfig, pb1500_defconfig
and pb1550_defconfig
o malta_defconfig. The platform code itself is ok but irq-gic.c,
irq-msc01.c, irq-msc01.c and irq_cpu.c are still using set_irq_chip
and need fixing.
o And the rest:
decstation_defconfig, emma2rh_defconfig, ip32_defconfig,
yosemite_defconfig, mipssim_defconfig and rm200_defconfig.
For now I've checked in the following patch into linux-queue.
Ralf
MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platforms
__do_IRQ() is deprecated and will go away.
Signed-off-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
arch/mips/Kconfig | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -77,7 +77,6 @@ config MIPS_COBALT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config MACH_DECSTATION
bool "DECstations"
@@ -132,7 +131,6 @@ config MACH_JAZZ
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_100HZ
- select GENERIC_HARDIRQS_NO__DO_IRQ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
@@ -154,7 +152,6 @@ config LASAT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config LEMOTE_FULONG
bool "Lemote Fulong mini-PC"
@@ -175,7 +172,6 @@ config LEMOTE_FULONG
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select CPU_HAS_WB
help
@@ -246,7 +242,6 @@ config MACH_VR41XX
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
- select GENERIC_HARDIRQS_NO__DO_IRQ
config NXP_STB220
bool "NXP STB220 board"
@@ -360,7 +355,6 @@ config SGI_IP27
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
- select GENERIC_HARDIRQS_NO__DO_IRQ
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
@@ -559,7 +553,6 @@ config MIKROTIK_RB532
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select GENERIC_HARDIRQS_NO__DO_IRQ
select HW_HAS_PCI
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
@@ -697,8 +690,7 @@ config SCHED_OMIT_FRAME_POINTER
default y
config GENERIC_HARDIRQS_NO__DO_IRQ
- bool
- default n
+ def_bool y
#
# Select some configuration options automatically based on user selections.
@@ -905,7 +897,6 @@ config SOC_PNX833X
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_GPIO
select CPU_MIPSR2_IRQ_VI
@@ -924,7 +915,6 @@ config SOC_PNX8550
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_GPIO
config SWAP_IO_SPACE
