Re: [PATCH 1/2] dmaengine: TXx9 Soc DMA Controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 25 Feb 2009 18:45:28 -0700, Dan Williams <dan.j.williams@xxxxxxxxx> wrote:
> Some comments and questions below.

Thank you for review.

> > +static struct txx9dmac_dev *to_txx9dmac_dev(struct dma_device *ddev)
> > +{
> > +       if (ddev->device_prep_dma_memcpy)
> > +               return container_of(ddev, struct txx9dmac_dev, dma_memcpy);
> > +       return container_of(ddev, struct txx9dmac_dev, dma);
> > +}
> 
> Can you explain why you need two dma_devices per txx9dmac_dev?  My
> initial reaction is that it should be a bug if callers to
> to_txx9dmac_dev() don't know what type of channel they are holding.

I created two dma_devices: one for private slave dma channels and one
for public memcpy channel.  I will explain later in this mail.

> > +       dma_async_tx_descriptor_init(&desc->txd, &dc->chan);
> > +       desc->txd.tx_submit = txx9dmac_tx_submit;
> > +       desc->txd.flags = DMA_CTRL_ACK;
> > +       INIT_LIST_HEAD(&desc->txd.tx_list);
> > +       desc->txd.phys = dma_map_single(chan2parent(&dc->chan), &desc->hwdesc,
> > +                                       ddev->descsize, DMA_TO_DEVICE);
> > +       return desc;
> > +}
> 
> By setting DMA_CTRL_ACK by default this means that async_tx can never
> attach attach a dependent operation to a txx9 descriptor.  This may
> not be a problem in practice because async_tx will only do this to
> satisfy inter-channel dependencies.  For example memcpy on chan-foo
> followed by xor on chan-bar.  For future proofing the driver I would
> rely on clients properly setting the ack bit when they call
> ->device_prep_dma_memcpy

The desc->txd.flags will be overwritten in txx9dmac_prep_xxx.  The
reason setting DMA_CTRL_ACK here is to make the desc can be pulled
from freelist in txx9dmac_desc_get().

Maybe I should move this DMA_CTRL_ACK setting to txx9dmac_desc_put()?

> > +       /*
> > +        * The API requires that no submissions are done from a
> > +        * callback, so we don't need to drop the lock here
> > +        */
> > +       if (callback)
> > +               callback(param);
> > +}
> 
> This completion needs a call to dma_run_dependencies() for the same
> reason it needs to leave the ack bit clear by default.

OK, I will do.

> > +static irqreturn_t txx9dmac_interrupt(int irq, void *dev_id)
> > +{
> > +#ifdef TXX9_DMA_HAVE_IRQ_PER_CHAN
> > +       struct txx9dmac_chan *dc = dev_id;
> > +
> > +       dev_vdbg(chan2dev(&dc->chan), "interrupt: status=%#x\n",
> > +                       channel_readl(dc, CSR));
> > +
> > +       tasklet_schedule(&dc->tasklet);
> > +#else
> > +       struct txx9dmac_dev *ddev = dev_id;
> > +
> > +       dev_vdbg(ddev->dma.dev, "interrupt: status=%#x\n",
> > +                       dma_readl(ddev, MCR));
> > +
> > +       tasklet_schedule(&ddev->tasklet);
> > +#endif
> > +       /*
> > +        * Just disable the interrupts. We'll turn them back on in the
> > +        * softirq handler.
> > +        */
> > +       disable_irq_nosync(irq);
> > +
> > +       return IRQ_HANDLED;
> > +}
> 
> Why do you need to disable interrupts here?

Because interrupts are not cleared until txx9dmac_tasklet() calls
txx9dmac_scan_descriptors() and it writes to CSR.  Touching CSR in
txx9dmac_interrupt() seems bad while dc->lock spinlock does not
protect from interrupts.  I chose calling disable_irq here instead of
replace all spin_lock with spin_lock_irqsave.

> > +       dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
> > +
> > +       if (chan == &ddev->reserved_chan) {
> > +               /* reserved */
> > +               return 0;
> > +       }
> 
> Can you explain how reserved channels work?  It looks like you are
> working around the generic dma channel allocator, maybe it requires
> updating to meet your needs.

OK, let me try to explain.  This DMAC have four channels and one FIFO
buffer.  Each channel can be configured for memory-memory or
device-memory transfer, but only one channel can do alignment-free
memory-memory transfer at a time while the channel should occupy the
FIFO buffer for effective transfers.

Instead of dynamically assign the FIFO buffer to channels, I chose
make one dedicated channel for memory-memory transfer.  The dedicated
channel is public.  Other channels are private and used for slave
transfer.  Some devices in the SoC are wired to certain DMA channel.
The platform code will give a channel number for memory-memory
transfer via platform_data.

The txx9dmac_probe() creates two dma_device: one for private slave
channels and one for a public memory channel.  It also creates five
dma_chan: four dma_chan are wrapped by txx9dmac_chan and other one
dma_chan is used to reserve a memcpy channel number in slave
dma_device.

For example, if channel 2 was selected for memcpy, the dma_device for
slave (txx9dmac_dev.dma) contains txx9dmac_chan[0,1], reserved_chan
and txx9dmac_chan[3] in this order and the dma_device for memcpy
(txx9dmac_dev.dma_memcpy) contains txx9dmac_chan[2].

Now we have dma0chan0, dma0chan1, dma0chan2, dma0chan3 and dma1chan0.

The txx9dmac_probe() calls dma_request_channel() to reserve dma0chan2.

I need the reserved_chan to make channel 3 named "dma0chan3".  If I
can chose chan_id for each channels in dma_device, the reserved_chan
is not needed.

And if I could make only one channel in dma_device public, I need only
one dma_device.  But I suppose it is not easy while DMA_PRIVATE is not
per-channel attribute now.

---
Atsushi Nemoto


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux