Hello world I have a router d'link g624t with 32mb of ram,TI ar7,bootloader adam2. I have installed Routertech 2.8 and when i try to use the wireless access point i have a kernel error... With the help of Thechief i have try a new release deactivating the mips 16 code,but the problem is unsolved. I post the serial debug with the error: [CODE] Copyright (C) 2006 Merlion-ACORP Russia Software Company. Launching kernel LZMA decompressor. Kernel decompressor was successful ... launching kernel. LINUX started... Config serial console: ttyS0,38400 Auto Detection SANGAM chip This SOC has MDIX cababilities on chip. CPU revision is: 00018448 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Number of TLB entries 16. Linux version 2.4.17_mvl21-malta-mips_fp_le (router@Ubuntu) () #1 Sun Nov 23 01:41:54 GMT 2008 Determined physical RAM map: memory: 14000000 @ 00000000 (reserved) memory: 00020000 @ 14000000 (ROM data) memory: 01fe0000 @ 14020000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: calculating r4koff... 000b71b0(750000) CPU frequency 150.00 MHz Calibrating delay loop... 149.91 BogoMIPS Freeing Adam2 reserved memory [0x14001000,0x0001f000] Memory: 30156k/32768k available (1802k kernel code, 2612k reserved, 131k data, 60k init) Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 TI Optimizations: Allocating TI-Cached Memory Pool. Using 120 Buffers for TI-Cached Memory Pool. DEBUG: Using Hybrid Mode. NSP Optimizations: Succesfully allocated TI-Cached Memory Pool. Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.7 (20011216) Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x1 squashfs: version 3.1 (2006/08/19) Phillip Lougher, lzma support by McMCC Adam2 environment variables API installed. pty: 32 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xa8610e00 (irq = 15) is a 16550A ttyS01 at 0xa8610f00 (irq = 16) is a 16550A Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2 Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0 Vlynq instance:0 Link UP Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0 VLYNQ 1 : init failed cpu_freq = 150000000 block: 64 slots per queue, batch=16 DEBUG: Initializing the voice port management module. DEBUG: Initialization of the voice port management module successful.. Cpmac driver is allocating buffer memory at init time. Cpmac driver Enable TX complete interrupt Default Asymmetric MTU for eth0 1500 Default Asymmetric MTU for eth1 1500 Default Asymmetric MTU for eth2 1500 Default Asymmetric MTU for eth3 1500 PPP generic driver version 2.4.1 avalanche flash device: 0x400000 at 0x10000000. Amd/Fujitsu Extended Query Table v1.1 at 0x0040 Flash type: AMD; Manufacturer=AMD. Manufacturer_ID=0x0001; Chip_ID=0x00F9; Chip_Size=0x400000; Erase_Regions=0x0002 The Chief's FLASH extensions (www.RouterTech.Org): code loaded. number of CFI chips: 1 Looking for mtd device :mtd0: Found a mtd0 image (0x94000), with size (0x35c000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00094000-0x003f0000 : "mtd0" mtd: partition "mtd0" doesn't start on an erase block boundary -- force read-only Looking for mtd device :mtd1: Found a mtd1 image (0x10090), with size (0x83f70). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00010090-0x00094000 : "mtd1" mtd: partition "mtd1" doesn't start on an erase block boundary -- force read-only Looking for mtd device :mtd2: Found a mtd2 image (0x0), with size (0x10000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00000000-0x00010000 : "mtd2" Looking for mtd device :mtd3: Found a mtd3 image (0x3f0000), with size (0x10000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x003f0000-0x00400000 : "mtd3" Looking for mtd device :mtd4: Found a mtd4 image (0x10000), with size (0x3e0000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00010000-0x003f0000 : "mtd4" Looking for mtd device :mtd5: NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (256 buckets, 2048 max) - 384 bytes per conntrack ip_conntrack_pptp version 1.9 loaded ip_nat_pptp version 1.5 loaded ip_tables: (C) 2000-2002 Netfilter core team ipt_account 0.1.6 : Piotr Gasid³o <quaker@xxxxxxxxxxxxxx>, http://www.barbara.eu.org/~quaker/ipt_account/ netfilter PSD loaded - (c) astaro AG NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Initializing the WAN Bridge. Please set the MAC Address for the WAN Bridge. Set the Environment variable 'HWA_3' or 'macc' or 'wan_br_mac'. MAC Address should be in the following format: xx:xx:xx:xx:xx:xx VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k freed Algorithmics/MIPS FPU Emulator v1.5 Sun Nov 23 01:46:00 UTC 2008 Reading Standard Configuration File /etc/led.conf Configured 19 states registered device TI Avalanche SAR Sangam detected DSP binary filesize = 362422 bytes tn7dsl_set_modulation : Setting mode to 0xff Texas Instruments ATM driver: version:[7.03.09.00] ifconfig: SIOCGIFFLAGS: No such device ifconfig: SIOCGIFFLAGS: No such device ifconfig: SIOCGIFFLAGS: No such device Please press Enter to activate this console. PVC dB vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 Nov 23 01:46:12 cfgmgr(pppoa-108): Nov 23 01:46:12 | Valid Configuration Tree Doing BRCTL ... addbr br0 Doing BRCTL ... addbr br1 Doing BRCTL ... addbr br2 Nov 23 01:4tn7dsl_set_modulation : Setting mode to 0xff 6:12 cfgmgr(sntp): Nov 23 01:46:12 | NTP Polling Timer for DHCP Started succesfully. Nov 23 01:46:12 cfgmgr(sar): Nov 23 01:46:12 | DSL Polling Timer Started succesfully. Nov 23 01:46:12 cfgmgr(sar): Nov 23 01:46:12 | PSP Boot environment Modem Modulation Change: 0xff Nov 23 01:46:13 cfgmgr(fdb): Nov 23 01:46:13 | Firewall NAT service started Default Asymmetric MTU for br0 1500 Nov 23 01:46:13 cfgmgr(lanbridge0): Nov 23 01:46:13 | Bridge Created: br0 Default Asymmetric MTU for br1 1500 Default Asymmetric MTU for br2 1500 Doing BRCTL ... setfilter br0 0 Nov 23 01:46:15 cfgmgr(lanbridge0): Nov 23 01:46:15 | Bridge VLAN0 add eth0 Nov 23 01:46:15 cfgmgr(lanbridge0): Nov 23 01:46:15 | Bridge VLAN AUTO OFF. Doing BRCTL ... vlan trailer disable Doing BRCTL ... addif br0 eth0 Nov 23 01:46:15 cfgmgr(lanbridge1): Nov 23 01:46:15 | Bridge Created: br1 device eth0 entered promiscuous mode br0: port 1(eth0) entering learning state Doing BRCTL ... setfilter br1 0 Nov 23 01:46:16 cfgmgr(lanbridge2): Nov 23 01:46:16 | Bridge Created: br2 Doing BRCTL ... setfilter br2 0 Doing BRCTL ... stp br0 off Doing BRCTL ... setigmpsnoop br0 off Doing BRCTL ... stp br1 off Doing BRCTL ... setigmpsnoop br1 off Nov 23 01:46:18 cfgmgr(lanbridge0): Nov 23 01:46:18 | Bridge Interface Added: eth0 set bridge igmp snooping Off Default Asymmetric MTU for wlan0 1500 set bridge igmp snooping Off br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating 296: 802.11d is 296: disabled. 296: 802.11h is 296: disabled. 296: Configuration succeeded !!! 296: WLAN driver database is up Resetting the remote device. Doing BRCTL ... setfilter br0 0 Doing BRCTL ... stp br2 off Doing BRCTL ... setigmpsnoop br2 off Nov 23 01:46:20 cfgmgr(ap): Nov 23 01:46:20 | AP Driver configuration successful Un-resetting the remote device. About to re-init the VLYNQ. Re-initialized the VLYNQ. 298: AcxRegAddr = 0xA4040000, AcxMemAddr = 0xA4000000 298: whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104c 299: whal_acxProcInitiate: Cpu halt -> download code 299: whal_acxProcLoadFwImage: 0xa4000000, 0x0 299: whal_acxProcLoadFwImage() -- Loading FW image299: Compiled for RADIA (bg) radio 299: whal_acxProcLoadFwImage: 1, pBuf=0xc00a4000, len=0x15564. Extra pBuf=0x0, len=0x3 299: whal_acxProcLoadFwImage: 2, pBuf=0xc00a4000, len=0x15564. Extra pBuf=0x0, len=0x3 300: whal_acxProcLoadFwImage: 3, pBuf=0xc00a4000, len=0x15564, DataLen=0x1555c 300: whal_acxProcLoadFwImage: 4, pBuf=0xc00a4000, len=0x15564 300: whal_acxProcLoadFwImage: Checksum, calc=0x71e76f, file=0x71e76f 304: whal_acxProcInitiate: run 304: whal_acxProcWaitInitComplete: 309: whal_acxMboxInit: pCmdMbox=0xa401dd00, pInfoMbox=0xa401de88 309: ---------------------------------------------------------------- 309: ACX Firmaware Version = Rev 1.6.0.24 309: ---------------------------------------------------------------- 309: whal_acxProcConfigure: templates (beacon, probe response, tim) for [0] Network 310: whal_acxProcConfigure: Host Queue is in 0x95ACE020 310: TxQueue[0] NumDesc = 32 310: TxQueue[0] Priority = 0 310: TxQueue[1] NumDesc = 32 310: TxQueue[1] Priority = 129 310: whal_acxConfigMemory() -- HostRxDescriptorsAddr = 15ace020 310: RxQueue NumDesc = 32 310: RxQueue Priority = 0 310: RxQueue type = 7 311: 311: whal_acxProcConfigure: WEP cache 311: whal_acxProcConfigure: read queue heads 311: whal_acxConfigRead_QueueHead() - 311: RxMemBlkQ - 00015920 311: RxQueueHead - 00012f14 312: TxMemBlkQ - 0001b320 312: TxMemBlkQ[0]- 00013594 312: TxMemBlkQ[1]- 00013c14 312: 312: whal_acxProcConfigure: configure RxQueue/TxQueue objects 312: whal_txQueue_Init: [Qid=0] HwBaseAddr=0xa4013594, NumDesc=32 312: whal_txQueue_Init: [Qid=1] HwBaseAddr=0xa4013c14, NumDesc=32 313: whal_ParamsPrintMemMap: 313: Code (0x00000000, 0x0001250c) Wep (0x000127e4, 0x000128f4) Sta (0x000128f4, 0x00012efc) Tmpl (0x00012524, 0x000125c1) Queue (0x00012f14, 0x00014294) Pool (0x00015920, 0x0001c720) 315: whal_apiConfig: beaconInterval = 200 WATCH_DOG_TIMER_VAL = 520 wd_beacon_limiter = 1 315: WLAN HAL layer is up 315: BssBridge is up 315: Mgmt is up 315: Rx is up 315: Tx is up 315: MemMngr is up 315: main state machine is up 336: WDRV_MAINSM: WLAN Driver initialized successfully 336: WDRV_4X: 4x Disabled 336: WDRV_4X: Concatenation Disabled 336: WDRV_4X: Ack Emulation Disabled 336: whal_apiStartBss: Enable Tx, Rx and Start the Bss 336: ---------------------------------------------------------------- 336: ---------------------------------------------------------------- 336: START BSS, SSID=RouterTech.Org, BSSID=00-E0-A0-A6-66-70 337: ---------------------------------------------------------------- 337: ---------------------------------------------------------------- 337: AP Power Level = 1 337: Regulatory Domain = ETSI 337: Net[0] : Channel=11 337: ---------------------------------------------------------------- 338: FW Watchdog is Enabled dda: wlan0 in initializing Succeeded wireless extensions: ret = 0 set bridge igmp snooping Off Nov 23 01:46:24 cfgmgr(ap): Nov 23 01:46:24 | AP IS UP wlan0 device is activated Nov 23 01:46:24 cfgmgr(static-105): Nov 23 01:46:24 | ifconfig failed with message: (null) Doing BRCTL ... addif br0 wlan0 device wlan0 entered promiscuous mode br0: port 2(wlan0) entering learning state Nov 23 01:46:24 cfgmgr(lanbridge0): Nov 23 01:46:24 | Bridge Interface Added: wlan0 Doing BRCTL ... setfilter br0 0 Nov 23 01:46:26 cfgmgr(sar): Nov 23 01:46:26 | DSL Carrier is down br0: port 2(wlan0) entering forwarding state br0: topology change detected, propagating Restarting system. ADAM2 Revision 0.22.13 (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved. (C) Copyright 2003 Telogy Networks, Inc. Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz] Memory optimization Complete! mac_init(): Find mac [(ë(ɨCšû¬Õ§ ÐP5T(”T(”] in location 7 Illegal mac [(ë(ɨCšû¬Õ§ ÐP5T(”T(”], skip mac_value:00:e0:a0:a6:66:70 Adam2_4MMod > Press any key to abort OS load, or wait 5 seconds for OS to boot... Copyright (C) 2006 Merlion-ACORP Russia Software Company. Launching kernel LZMA decompressor. Kernel decompressor was successful ... launching kernel. LINUX started... Config serial console: ttyS0,38400 Auto Detection SANGAM chip This SOC has MDIX cababilities on chip. CPU revision is: 00018448 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Number of TLB entries 16. Linux version 2.4.17_mvl21-malta-mips_fp_le (router@Ubuntu) () #1 Sun Nov 23 01:41:54 GMT 2008 Determined physical RAM map: memory: 14000000 @ 00000000 (reserved) memory: 00020000 @ 14000000 (ROM data) memory: 01fe0000 @ 14020000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: calculating r4koff... 000b71b0(750000) CPU frequency 150.00 MHz Calibrating delay loop... 149.91 BogoMIPS Freeing Adam2 reserved memory [0x14001000,0x0001f000] Memory: 30156k/32768k available (1802k kernel code, 2612k reserved, 131k data, 60k init) Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 TI Optimizations: Allocating TI-Cached Memory Pool. Using 120 Buffers for TI-Cached Memory Pool. DEBUG: Using Hybrid Mode. NSP Optimizations: Succesfully allocated TI-Cached Memory Pool. Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.7 (20011216) Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x1 squashfs: version 3.1 (2006/08/19) Phillip Lougher, lzma support by McMCC Adam2 environment variables API installed. pty: 32 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xa8610e00 (irq = 15) is a 16550A ttyS01 at 0xa8610f00 (irq = 16) is a 16550A Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2 Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0 Vlynq instance:0 Link UP Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0 VLYNQ 1 : init failed cpu_freq = 150000000 block: 64 slots per queue, batch=16 DEBUG: Initializing the voice port management module. DEBUG: Initialization of the voice port management module successful.. Cpmac driver is allocating buffer memory at init time. Cpmac driver Enable TX complete interrupt Default Asymmetric MTU for eth0 1500 Default Asymmetric MTU for eth1 1500 Default Asymmetric MTU for eth2 1500 Default Asymmetric MTU for eth3 1500 PPP generic driver version 2.4.1 avalanche flash device: 0x400000 at 0x10000000. Amd/Fujitsu Extended Query Table v1.1 at 0x0040 Flash type: AMD; Manufacturer=AMD. Manufacturer_ID=0x0001; Chip_ID=0x00F9; Chip_Size=0x400000; Erase_Regions=0x0002 The Chief's FLASH extensions (www.RouterTech.Org): code loaded. number of CFI chips: 1 Looking for mtd device :mtd0: Found a mtd0 image (0x94000), with size (0x35c000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00094000-0x003f0000 : "mtd0" mtd: partition "mtd0" doesn't start on an erase block boundary -- force read-only Looking for mtd device :mtd1: Found a mtd1 image (0x10090), with size (0x83f70). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00010090-0x00094000 : "mtd1" mtd: partition "mtd1" doesn't start on an erase block boundary -- force read-only Looking for mtd device :mtd2: Found a mtd2 image (0x0), with size (0x10000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00000000-0x00010000 : "mtd2" Looking for mtd device :mtd3: Found a mtd3 image (0x3f0000), with size (0x10000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x003f0000-0x00400000 : "mtd3" Looking for mtd device :mtd4: Found a mtd4 image (0x10000), with size (0x3e0000). Creating 1 MTD partitions on "Physically mapped flash:0": 0x00010000-0x003f0000 : "mtd4" Looking for mtd device :mtd5: NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (256 buckets, 2048 max) - 384 bytes per conntrack ip_conntrack_pptp version 1.9 loaded ip_nat_pptp version 1.5 loaded ip_tables: (C) 2000-2002 Netfilter core team ipt_account 0.1.6 : Piotr Gasid³o <quaker@xxxxxxxxxxxxxx>, http://www.barbara.eu.org/~quaker/ipt_account/ netfilter PSD loaded - (c) astaro AG NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Initializing the WAN Bridge. Please set the MAC Address for the WAN Bridge. Set the Environment variable 'HWA_3' or 'macc' or 'wan_br_mac'. MAC Address should be in the following format: xx:xx:xx:xx:xx:xx VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k freed Algorithmics/MIPS FPU Emulator v1.5 Sun Nov 23 01:46:00 UTC 2008 Reading Standard Configuration File /etc/led.conf Configured 19 states registered device TI Avalanche SAR Sangam detected DSP binary filesize = 362422 bytes tn7dsl_set_modulation : Setting mode to 0xff Texas Instruments ATM driver: version:[7.03.09.00] ifconfig: SIOCGIFFLAGS: No such device ifconfig: SIOCGIFFLAGS: No such device ifconfig: SIOCGIFFLAGS: No such device Please press Enter to activate this console. PVC dB vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 vpi = -1 vci = -1 in_use = 0 Nov 23 01:46:12 cfgmgr(pppoa-108): Nov 23 01:46:12 | Valid Configuration Tree Doing BRCTL ... addbr br0 Doing BRCTL ... addbr br1 Doing BRCTL ... addbr br2 Nov 23 01:46:12 cfgmgr(sntp): Nov 23 01:46:12 | NTP Polling Timer for DHCP Started succesfully.tn7dsl_set_modulation : Setting mode to 0xff Nov 23 01:46:12 cfgmgr(sar): Nov 23 01:46:12 | DSL Polling Timer Started succesfully. Nov 23 01:46:13 cfgmgr(sar): Nov 23 01:46:13 | PSP Boot environment Modem Modulation Change: 0xff Nov 23 01:46:13 cfgmgr(fdb): Nov 23 01:46:13 | Firewall NAT service started Default Asymmetric MTU for br0 1500 Default Asymmetric MTU for br1 1500 Nov 23 01:46:13 cfgmgr(lanbridge0): Nov 23 01:46:13 | Bridge Created: br0 Default Asymmetric MTU for br2 1500 Doing BRCTL ... setfilter br0 0 Nov 23 01:46:15 cfgmgr(lanbridge0): Nov 23 01:46:15 | Bridge VLAN0 add eth0 Nov 23 01:46:15 cfgmgr(lanbridge0): Nov 23 01:46:15 | Bridge VLAN AUTO OFF. Doing BRCTL ... vlan trailer disable Doing BRCTL ... addif br0 eth0 Nov 23 01:46:15 cfgmgr(lanbridge1): Nov 23 01:46:15 | Bridge Created: br1 device eth0 entered promiscuous mode br0: port 1(eth0) entering learning state Doing BRCTL ... setfilter br1 0 Nov 23 01:46:18 cfgmgr(ap): Nov 23 01:46:18 | WPA Authenticator Started Nov 23 01:46:18 cfgmgr(lanbridge2): Nov 23 01:46:18 | Bridge Created: br2 br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating Doing BRCTL ... setfilter br2 0 Doing BRCTL ... stp br0 off Doing BRCTL ... setigmpsnoop br0 off Nov 23 01:46:20 cfgmgr(lanbridge0): Nov 23 01:46:20 | Bridge Interface Added: eth0 set bridge igmp snooping Off Doing BRCTL ... setfilter br0 0 Doing BRCTL ... stp br1 off Doing BRCTL ... setigmpsnoop br1 off Doing BRCTL ... stp br2 off Doing BRCTL ... setigmpsnoop br2 off Nov 23 01:46:22 cfgmgr(sar): Nov 23 01:46:22 | DSL Carrier is down set bridge igmp snooping Off set bridge igmp snooping Off Default Asymmetric MTU for wlan0 1500 Nov 23 01:46:23 cfgmgr(ap): Nov 23 01:46:23 | AP Driver configuration successful 343: 802.11d is 343: disabled. 343: 802.11h is 343: disabled. 343: Configuration succeeded !!! 343: WLAN driver database is up Resetting the remote device. Un-resetting the remote device. About to re-init the VLYNQ. Re-initialized the VLYNQ. 344: AcxRegAddr = 0xA4040000, AcxMemAddr = 0xA4000000 344: whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104c 344: whal_acxProcInitiate: Cpu halt -> download code 344: whal_acxProcLoadFwImage: 0xa4000000, 0x0 345: whal_acxProcLoadFwImage() -- Loading FW image345: Compiled for RADIA (bg) radio 345: whal_acxProcLoadFwImage: 1, pBuf=0xc00a4000, len=0x15564. Extra pBuf=0x0, len=0x3 345: whal_acxProcLoadFwImage: 2, pBuf=0xc00a4000, len=0x15564. Extra pBuf=0x0, len=0x3 345: whal_acxProcLoadFwImage: 3, pBuf=0xc00a4000, len=0x15564, DataLen=0x1555c 346: whal_acxProcLoadFwImage: 4, pBuf=0xc00a4000, len=0x15564 346: whal_acxProcLoadFwImage: Checksum, calc=0x71e76f, file=0x71e76f 349: whal_acxProcInitiate: run 349: whal_acxProcWaitInitComplete: 354: whal_acxMboxInit: pCmdMbox=0xa401dd00, pInfoMbox=0xa401de88 355: ---------------------------------------------------------------- 355: ACX Firmaware Version = Rev 1.6.0.24 355: ---------------------------------------------------------------- 355: whal_acxProcConfigure: templates (beacon, probe response, tim) for [0] Network 355: whal_acxProcConfigure: Host Queue is in 0x95DD0020 356: TxQueue[0] NumDesc = 32 356: TxQueue[0] Priority = 0 356: TxQueue[1] NumDesc = 32 356: TxQueue[1] Priority = 129 356: whal_acxConfigMemory() -- HostRxDescriptorsAddr = 15dd0020 356: RxQueue NumDesc = 32 356: RxQueue Priority = 0 356: RxQueue type = 7 356: 356: whal_acxProcConfigure: WEP cache 357: whal_acxProcConfigure: read queue heads 357: whal_acxConfigRead_QueueHead() - 357: RxMemBlkQ - 00016900 357: RxQueueHead - 00013ef4 357: TxMemBlkQ - 0001b400 357: TxMemBlkQ[0]- 00014574 357: TxMemBlkQ[1]- 00014bf4 357: 357: whal_acxProcConfigure: configure RxQueue/TxQueue objects 357: whal_txQueue_Init: [Qid=0] HwBaseAddr=0xa4014574, NumDesc=32 358: whal_txQueue_Init: [Qid=1] HwBaseAddr=0xa4014bf4, NumDesc=32 358: whal_ParamsPrintMemMap: 358: Code (0x00000000, 0x0001250c) Wep (0x000127e4, 0x000128f4) Sta (0x000128f4, 0x00013edc) Tmpl (0x00012524, 0x000125c1) Queue (0x00013ef4, 0x00015274) Pool (0x00016900, 0x0001c800) 360: whal_apiConfig: beaconInterval = 200 WATCH_DOG_TIMER_VAL = 520 wd_beacon_limiter = 1 360: WLAN HAL layer is up 361: BssBridge is up 361: Mgmt is up 361: Rx is up 361: Tx is up 361: MemMngr is up 361: main state machine is up 381: WDRV_MAINSM: WLAN Driver initialized successfully 381: WDRV_4X: 4x Disabled 381: WDRV_4X: Concatenation Disabled 381: WDRV_4X: Ack Emulation Disabled 381: whal_apiStartBss: Enable Tx, Rx and Start the Bss 382: ---------------------------------------------------------------- 382: ---------------------------------------------------------------- 382: START BSS, SSID=RouterTech.Org, BSSID=00-E0-A0-A6-66-70 382: ---------------------------------------------------------------- 382: ---------------------------------------------------------------- 383: AP Power Level = 1 383: Regulatory Domain = ETSI 383: Net[0] : Channel=11 383: ---------------------------------------------------------------- 384: FW Watchdog is Enabled dda: wlan0 in initializing Succeeded wireless extensions: ret = 0 Nov 23 01:46:29 cfgmgr(ap): Nov 23 01:46:29 | AP IS UP wlan0 device is activated Doing BRCTL ... addif br0 wlan0 device wlan0 entered promiscuous mode br0: port 2(wlan0) entering learning state Nov 23 01:46:29 cfgmgr(lanbridge0): Nov 23 01:46:29 | Bridge Interface Added: wlan0 Doing BRCTL ... setfilter br0 0 br0: port 2(wlan0) entering forwarding state br0: topology change detected, propagating Kernel unaligned instruction access in unaligned.c:do_ade, line 408: $0 : 00000000 1000fc00 00000000 00030001 00000022 00000000 00000000 c0043000 $8 : 1000fc01 1000001f 941f3040 40000000 95c19ee1 fffffffb 00000008 7fff6ae0 $16: 00000022 9435eb40 95f1e000 00000000 00000006 95f1ffe8 00000000 00000400 $24: 00000001 2acbed80 95f1e000 95f1ff08 7fff7db8 9402e810 Hi : 00000032 Lo : 3d70a403 epc : 9418c1d4 Not tainted Status: 1000fc03 Cause : 10800010 Process (pid: 27, stackpage=95f1e000) Stack: dd6d8803 64968a2f 69056570 74e502fe 4e9513bb af8ddcd0 21882d17 a128fce3 00000022 9435eb40 9402e810 042be70e 970fb07d 74d74d68 8f517ecb 15de7efb 3efc2784 00030001 82bd1d07 44a34b32 e1fc0257 de42e953 394fce67 36aa613f 53fda4f3 88b62868 8fbfdbeb cf4c1179 ee4f3d4c a7ed4a44 b5d0c4ae 765f43a3 195a1db0 91e0d6bd 083783f6 42314d1f cad648c8 58657618 f4ebdb79 728a7a05 8ad2187d ... Call Trace: [<9402e810>] [<940302b8>] Code: afbf0028 afb10024 afb00020 <8c850000> 04a00007 24820008 8c830008 14620005 03808021 Kernel unaligned instruction access in unaligned.c:do_ade, line 408: $0 : 00000000 1000fc00 383e6e6f 0000001a 95be83f8 736e6172 95be8000 00000000 $8 : 0da8d7fc 1000001f 95f1fcd3 00000000 94214529 fffffffe 95f1fc8e ffffffff $16: 95be83f0 941fc6a4 00000001 95be83f0 0000001b 95be93d0 00000000 00000400 $24: 00000010 00000006 95be8000 95be90a8 7fff7db8 94040b58 Hi : 0da8d7fc Lo : 86d504ab epc : 94040ad0 Not tainted Status: 1000fc02 Cause : 10808010 Process (pid: 718007680, stackpage=95be8000) Stack: 8ea20008 8f878020 00000000 24e77084 95be8000 00000001 95be8000 1000fc00 00000000 94040b58 8ea40000 8f858020 00000000 24a570b0 94040d44 00000000 0320f809 00000000 8fbc0020 144000a2 00000009 94041058 02c02021 8f998798 00000000 0320f809 006d46bf 95be8000 00000000 95be91c0 ab710d06 94041558 8e8400a8 8f858020 00000000 24a56c7c 9403f848 00000000 0320f809 00000000 8fbc0020 ... Call Trace: [<94040b58>] [<94040d44>] [<94041058>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<94191880>] [<9402df94>] [<c0043000>] [<9402e9bc>] [<940302ac>] [<9402df94>] [<c0043000>] [<9402e9bc>] [<9402df94>] [<940302b8>] [<9402df94>] [<c0043000>] [<9402e9bc>] [<9402df94>] [<940302b8>] [<9402df94>] [<c0043000>] [<9402e9bc>] [<9402df94>] [<940302b8>] [<9402df94>] [<c0043000>] [<9402e9bc>] [<9402df94>] [<940302b8>] [<9402df94>] [<c0043000>] [<9402e9bc>] [<9402df94>] [<940302b8>] [<9402df94>] [<c0043000>] [<9402e9bc>] ... Code: 24120001 3c119420 2631c6a4 <8ca20004> 54540010 00a08021 8ca20000 14400002 ae020000 Kernel unaligned instruction access in unaligned.c:do_ade, line 408: $0 : 00000000 1000fc00 69746361 00000001 00000084 959f2124 00000002 959f2124 $8 : 1000fc00 1000001f 95be8e7a 00000000 94214529 fffffffe 95be8e2f ffffffff $16: 00000001 941fc6a4 00000009 95be83f0 00000000 95be93d0 00000000 00000400 $24: 00000010 00000007 95be8000 95be8de8 7fff7db8 94040dc8 Hi : 00000000 Lo : 00000084 epc : 94040df0 Not tainted Status: 1000fc02 Cause : 10808014 Process (pid: 718007680, stackpage=95be8000) Stack: 95be8000 00000001 95be8000 1000fc00 95be8000 00000009 95be8000 1000fc00 94040f68 00000000 94040d50 39343032 38303130 31303830 00000009 00000001 95be8000 94041118 00000000 00000000 00000000 00000000 006d46bf 95be8000 00000000 95be8ef0 0000001b 94041558 33323130 37363534 00000005 66656463 9403f848 00003135 33323130 37363534 00000005 66656463 95be8000 00000001 00000000 ... Call Trace: [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] Code: 00000000 ace00000 8e620004 <ac470000> 12000005 ae670004 5203000b acf20004 09010391 Kernel unaligned instruction access in unaligned.c:do_ade, line 408: $0 : 00000000 1000fc00 69746361 00000001 00000108 959f21a8 00000003 959f21a8 $8 : 1000fc00 1000001f 95be8bb9 00000000 94214529 fffffffe 95be8b6e ffffffff $16: 00000001 941fc6a4 00000009 95be83f0 00000000 95be93d0 00000000 00000400 $24: 00000010 00000006 95be8000 95be8b28 7fff7db8 94040dc8 Hi : 00000000 Lo : 00000108 epc : 94040df0 Not tainted Status: 1000fc02 Cause : 00808414 Process (pid: 718007680, stackpage=95be8000) Stack: 95be8000 00000001 95be8000 1000fc00 95be8000 00000009 95be8000 1000fc00 94040f68 00000000 94040d50 39343032 38303134 31303830 00000009 00000001 95be8000 94041118 00000000 00000000 00000000 00000000 006d46bf 95be8000 00000000 95be8c30 00000000 94041558 33323130 37363534 00000005 66656463 9403f848 00003684 33323130 37363534 00000005 66656463 95be8000 00000001 00000000 ... Call Trace: [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] [<94040df0>] [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] Code: 00000000 ace00000 8e620004 <ac470000> 12000005 ae670004 5203000b acf20004 09010391 Kernel unaligned instruction access in unaligned.c:do_ade, line 408: $0 : 00000000 1000fc00 69746361 00000001 0000018c 959f222c 00000004 959f222c $8 : 1000fc00 1000001f 95be88f9 00000000 94214529 fffffffe 95be88ae ffffffff $16: 00000001 941fc6a4 00000009 95be83f0 00000000 95be93d0 00000000 00000400 $24: 00000010 00000006 95be8000 95be8868 7fff7db8 94040dc8 Hi : 00000000 Lo : 0000018c epc : 94040df0 Not tainted Status: 1000fc02 Cause : 00808414 Process (pid: 718007680, stackpage=95be8000) Stack: 95be8000 00000001 95be8000 1000fc00 95be8000 00000009 95be8000 1000fc00 94040f68 00000000 94040d50 39343032 38343134 31303830 00000009 00000001 95be8000 94041118 00000000 00000000 00000000 00000000 006d46bf 95be8000 00000000 95be8970 00000000 94041558 33323130 37363534 00000005 66656463 9403f848 00003cf0 33323130 37363534 00000005 66656463 95be8000 00000001 00000000 ... Call Trace: [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] [<94040df0>] [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] ... Code: 00000000 ace00000 8e620004 <ac470000> 12000005 ae670004 5203000b acf20004 09010391 Kernel unaligned instruction access in unaligned.c:do_ade, line 408: $0 : 00000000 1000fc00 69746361 00000001 00000210 959f22b0 00000005 959f22b0 $8 : 1000fc00 1000001f 95be8639 00000000 94214529 fffffffe 95be85ee ffffffff $16: 00000001 941fc6a4 00000009 95be83f0 00000000 95be93d0 00000000 00000400 $24: 00000010 00000006 95be8000 95be85a8 7fff7db8 94040dc8 Hi : 00000000 Lo : 00000210 epc : 94040df0 Not tainted Status: 1000fc02 Cause : 00808414 Process (pid: 718007680, stackpage=95be8000) Stack: 95be8000 00000001 95be8000 1000fc00 95be8000 00000009 95be8000 1000fc00 94040f68 00000000 94040d50 39343034 38343134 31303830 00000009 00000001 95be8000 94041118 00000000 00000000 00000000 00000000 006d46bf 95be8000 00000000 95be86b0 00000000 94041558 33323130 37363534 00000005 66656463 9403f848 0000436d 33323130 37363534 00000005 66656463 95be8000 00000001 00000000 ... Call Trace: [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] [<94040df0>] [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] ... Code: 00000000 ace00000 8e620004 <ac470000> 12000005 ae670004 5203000b acf20004 09010391 Kernel unaligned instruction access in unaligned.c:do_ade, line 408: $0 : 00000000 1000fc00 00000001 00000001 00000294 959f2334 00000006 959f2334 $8 : 1000fc00 1000001f 95be8379 00000000 94214529 fffffffe 95be832e ffffffff $16: 00000001 941fc6a4 00000009 95be83f0 00000000 95be93d0 00000000 00000400 $24: 00000010 00000006 95be8000 95be82e8 7fff7db8 94040dc8 Hi : 00000000 Lo : 00000294 epc : 94040df0 Not tainted Status: 1000fc02 Cause : 00808414 Process (pid: 718007680, stackpage=95be8000) Stack: 95be8000 00000001 95be8000 1000fc00 95be8000 00000009 95be8000 1000fc00 94040f68 743c3e65 94040d50 39343034 38343134 31303830 00000009 00000001 95be8000 94041118 79656b3c 79656b3e 6e656c5f 6b2f3c34 006d46bf 95be8000 00000000 95be83f0 00000000 94041558 33323130 37363534 00000005 66656463 9403f848 000049ea 33323130 37363534 00000005 66656463 95be8000 00000001 00000000 ... Call Trace: [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] [<94040df0>] [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] ... Code: 00000000 ace00000 8e620004 <ac470000> 12000005 ae670004 5203000b acf20004 09010391 Kernel unaligned instruction access in unaligned.c:do_ade, line 408: $0 : 00000000 1000fc00 00000001 00000001 00000318 959f23b8 00000007 959f23b8 $8 : 1000fc00 1000001f 95be80b9 00000000 94214529 fffffffe 95be806e ffffffff $16: 00000001 941fc6a4 0000001d 95be83f0 00000000 95be93d0 00000000 00000400 $24: 00000010 00000006 95be8000 95be8028 7fff7db8 94040dc8 Hi : 00000000 Lo : 00000318 epc : 94040df0 Not tainted Status: 1000fc02 Cause : 00800414 Process (pid: 0, stackpage=95be6000) Stack: afb010b1 ab710d06 a6322bdf a2f33668 95be8000 0000001d 95be8000 1000fc00 94040f68 00000000 30646338 39343034 38343134 31303830 0000001d 00000001 95be8000 94041118 2aafe000 2aaee000 2aaee000 2acbcbcc 7ffffffe 95be8000 00000000 95be8130 00000000 94041558 33323130 37363534 00000005 66656463 9403f89c 00005067 33323130 37363534 00000005 66656463 95be8000 00000001 00000000 ... Call Trace: [<94040f68>] [<94041118>] [<94041558>] [<9403f89c>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<9403476e>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] [<94040df0>] [<94040f68>] [<94040d50>] [<94041118>] [<94041558>] [<9403f848>] [<9403f8ec>] [<9403fec4>] [<94191c04>] [<9403469c>] [<94034730>] [<94191880>] [<940348a0>] [<94193ea0>] [<9402b588>] [<9402b59c>] [<94192cd0>] [<9402b5c8>] [<9402d974>] [<9402d6b8>] [<94040dc8>] [<94040df0>] ... Code: 00000000 ace00000 8e620004 <ac470000> 12000005 ae670004 5203000b acf20004 09010391 [CODE] Please cam help me to understand this error and solve it? Kindest regards Fabrizio -- View this message in context: http://www.nabble.com/Kernel-2.4.17_mvl21-malta-mips%3A-error-tp22046664p22046664.html Sent from the linux-mips main mailing list archive at Nabble.com.
