The forthcoming OCTEON SOC Compact Flash driver needs an additional
timing value that was not available in the ata_timing table. I add a
new column for dmack_hold time. The values were obtained from the
Compact Flash specification Rev 4.1.
Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-core.c | 72 +++++++++++++++++++++++----------------------
include/linux/libata.h | 9 ++++--
2 files changed, 43 insertions(+), 38 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 71218d7..8fe0012 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3029,33 +3029,33 @@ int sata_set_spd(struct ata_link *link)
*/
static const struct ata_timing ata_timing[] = {
-/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
- { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
- { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
- { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
- { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
- { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
- { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
- { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
-
- { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
- { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
- { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
-
- { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
- { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
- { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
- { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 },
- { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
-
-/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
- { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
- { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
- { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
- { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
- { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
- { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
- { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 },
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 },
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 },
+ { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 },
+ { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 },
+
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 },
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 },
+
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 },
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 },
+ { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 },
+ { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 },
+
+/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 },
{ 0xFF }
};
@@ -3065,14 +3065,15 @@ static const struct ata_timing ata_timing[] = {
static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
{
- q->setup = EZ(t->setup * 1000, T);
- q->act8b = EZ(t->act8b * 1000, T);
- q->rec8b = EZ(t->rec8b * 1000, T);
- q->cyc8b = EZ(t->cyc8b * 1000, T);
- q->active = EZ(t->active * 1000, T);
- q->recover = EZ(t->recover * 1000, T);
- q->cycle = EZ(t->cycle * 1000, T);
- q->udma = EZ(t->udma * 1000, UT);
+ q->setup = EZ(t->setup * 1000, T);
+ q->act8b = EZ(t->act8b * 1000, T);
+ q->rec8b = EZ(t->rec8b * 1000, T);
+ q->cyc8b = EZ(t->cyc8b * 1000, T);
+ q->active = EZ(t->active * 1000, T);
+ q->recover = EZ(t->recover * 1000, T);
+ q->dmack_hold = EZ(t->dmack_hold * 1000, T);
+ q->cycle = EZ(t->cycle * 1000, T);
+ q->udma = EZ(t->udma * 1000, UT);
}
void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
@@ -3084,6 +3085,7 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+ if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b6b8a7f..9c308b4 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -401,12 +401,14 @@ enum {
ATA_TIMING_CYC8B,
ATA_TIMING_ACTIVE = (1 << 4),
ATA_TIMING_RECOVER = (1 << 5),
- ATA_TIMING_CYCLE = (1 << 6),
- ATA_TIMING_UDMA = (1 << 7),
+ ATA_TIMING_DMACK_HOLD = (1 << 6),
+ ATA_TIMING_CYCLE = (1 << 7),
+ ATA_TIMING_UDMA = (1 << 8),
ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
- ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
+ ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
+ ATA_TIMING_UDMA,
};
enum ata_xfer_mask {
@@ -866,6 +868,7 @@ struct ata_timing {
unsigned short cyc8b; /* t0 for 8-bit I/O */
unsigned short active; /* t2 or tD */
unsigned short recover; /* t2i or tK */
+ unsigned short dmack_hold; /* tj */
unsigned short cycle; /* t0 */
unsigned short udma; /* t2CYCTYP/2 */
};
--
1.5.6.6
