On Tue, Nov 11, 2008 at 09:54:57PM -0600, Kevin Hickey wrote:
> Manuel,
>
> Why is this reorganization necessary? I actually think we have too much
> consolidation; as I am working on the new SOC I am finding it easier to
> subdivide more (esp out of platform.c but that's a whole other story).
>
> What's the advantage to this change?
In all boards, init.c only contains prom initialization code; this one I
moved to a "common" file. After that, all that was left was the IRQ map
which had more lines of copyright than interesting code. I have also made
a few changes to alchemy IRQ code (and made board_init_irq() mandatory in
the process) which led me to move all initialization-relevant board code
into a single file. It seemed to be a good optimization at the time ;-)
If you and others prefer to keep the old file layout, no problem. I'll just
move them to a demoboard subdirectory instead.
Thanks,
Manuel Lauss
> =Kevin
>
>
> On Sat, 2008-11-08 at 13:08 +0100, Manuel Lauss wrote:
> > Most files of the Alchemy boards are very small. Merge them.
> >
> > Signed-off-by: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
> > ---
> > arch/mips/alchemy/db1x00/Makefile | 2 +-
> > arch/mips/alchemy/db1x00/board_setup.c | 92 +++++++++++++++++-
> > arch/mips/alchemy/db1x00/init.c | 62 ------------
> > arch/mips/alchemy/db1x00/irqmap.c | 86 ----------------
> > arch/mips/alchemy/mtx-1/Makefile | 2 +-
> > arch/mips/alchemy/mtx-1/board_setup.c | 52 ++++++++++-
> > arch/mips/alchemy/mtx-1/init.c | 60 -----------
> > arch/mips/alchemy/mtx-1/irqmap.c | 52 ----------
> > arch/mips/alchemy/pb1000/Makefile | 2 +-
> > arch/mips/alchemy/pb1000/board_setup.c | 36 +++++++-
> > arch/mips/alchemy/pb1000/init.c | 57 -----------
> > arch/mips/alchemy/pb1000/irqmap.c | 38 -------
> > arch/mips/alchemy/pb1100/Makefile | 2 +-
> > arch/mips/alchemy/pb1100/board_setup.c | 42 ++++++++-
> > arch/mips/alchemy/pb1100/init.c | 60 -----------
> > arch/mips/alchemy/pb1100/irqmap.c | 40 --------
> > arch/mips/alchemy/pb1200/Makefile | 2 +-
> > arch/mips/alchemy/pb1200/board_setup.c | 162 ++++++++++++++++++++++++++++++-
> > arch/mips/alchemy/pb1200/init.c | 58 -----------
> > arch/mips/alchemy/pb1200/irqmap.c | 160 ------------------------------
> > arch/mips/alchemy/pb1500/Makefile | 2 +-
> > arch/mips/alchemy/pb1500/board_setup.c | 46 +++++++++-
> > arch/mips/alchemy/pb1500/init.c | 58 -----------
> > arch/mips/alchemy/pb1500/irqmap.c | 46 ---------
> > arch/mips/alchemy/pb1550/Makefile | 2 +-
> > arch/mips/alchemy/pb1550/board_setup.c | 41 ++++++++-
> > arch/mips/alchemy/pb1550/init.c | 58 -----------
> > arch/mips/alchemy/pb1550/irqmap.c | 43 --------
> > arch/mips/alchemy/xxs1500/Makefile | 2 +-
> > arch/mips/alchemy/xxs1500/board_setup.c | 50 +++++++++-
> > arch/mips/alchemy/xxs1500/init.c | 58 -----------
> > arch/mips/alchemy/xxs1500/irqmap.c | 49 ---------
> > 32 files changed, 513 insertions(+), 1009 deletions(-)
> > delete mode 100644 arch/mips/alchemy/db1x00/init.c
> > delete mode 100644 arch/mips/alchemy/db1x00/irqmap.c
> > delete mode 100644 arch/mips/alchemy/mtx-1/init.c
> > delete mode 100644 arch/mips/alchemy/mtx-1/irqmap.c
> > delete mode 100644 arch/mips/alchemy/pb1000/init.c
> > delete mode 100644 arch/mips/alchemy/pb1000/irqmap.c
> > delete mode 100644 arch/mips/alchemy/pb1100/init.c
> > delete mode 100644 arch/mips/alchemy/pb1100/irqmap.c
> > delete mode 100644 arch/mips/alchemy/pb1200/init.c
> > delete mode 100644 arch/mips/alchemy/pb1200/irqmap.c
> > delete mode 100644 arch/mips/alchemy/pb1500/init.c
> > delete mode 100644 arch/mips/alchemy/pb1500/irqmap.c
> > delete mode 100644 arch/mips/alchemy/pb1550/init.c
> > delete mode 100644 arch/mips/alchemy/pb1550/irqmap.c
> > delete mode 100644 arch/mips/alchemy/xxs1500/init.c
> > delete mode 100644 arch/mips/alchemy/xxs1500/irqmap.c
> >
> > diff --git a/arch/mips/alchemy/db1x00/Makefile b/arch/mips/alchemy/db1x00/Makefile
> > index 274db3b..9924aa0 100644
> > --- a/arch/mips/alchemy/db1x00/Makefile
> > +++ b/arch/mips/alchemy/db1x00/Makefile
> > @@ -5,4 +5,4 @@
> > # Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
> > #
> >
> > -lib-y := init.o board_setup.o irqmap.o
> > +lib-y := board_setup.o
> > diff --git a/arch/mips/alchemy/db1x00/board_setup.c b/arch/mips/alchemy/db1x00/board_setup.c
> > index 9e5ccbb..507ded2 100644
> > --- a/arch/mips/alchemy/db1x00/board_setup.c
> > +++ b/arch/mips/alchemy/db1x00/board_setup.c
> > @@ -1,7 +1,10 @@
> > /*
> > *
> > * BRIEF MODULE DESCRIPTION
> > - * Alchemy Db1x00 board setup.
> > + * Alchemy Db1x00 board support.
> > + *
> > + * Copyright 2003 Embedded Edge, LLC
> > + * dan@xxxxxxxxxxxxxxxx
> > *
> > * Copyright 2000, 2008 MontaVista Software Inc.
> > * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > @@ -28,12 +31,99 @@
> > */
> >
> > #include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <asm/bootinfo.h>
> > +#include <prom.h>
> >
> > #include <asm/mach-au1x00/au1000.h>
> > #include <asm/mach-db1x00/db1x00.h>
> >
> > +#ifdef CONFIG_MIPS_DB1500
> > +char irq_tab_alchemy[][5] __initdata = {
> > + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
> > + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
> > +};
> > +#endif
> > +
> > +#ifdef CONFIG_MIPS_BOSPORUS
> > +char irq_tab_alchemy[][5] __initdata = {
> > + [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
> > + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
> > + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
> > +};
> > +#endif
> > +
> > +#ifdef CONFIG_MIPS_MIRAGE
> > +char irq_tab_alchemy[][5] __initdata = {
> > + [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
> > + [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
> > + [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
> > +};
> > +#endif
> > +
> > +#ifdef CONFIG_MIPS_DB1550
> > +char irq_tab_alchemy[][5] __initdata = {
> > + [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
> > + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
> > + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
> > +};
> > +#endif
> > +
> > +
> > +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > +
> > +#ifndef CONFIG_MIPS_MIRAGE
> > +#ifdef CONFIG_MIPS_DB1550
> > + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
> > + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
> > +#else
> > + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
> > + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
> > + { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
> > +
> > + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
> > + { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
> > + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
> > +#endif
> > +#else
> > + { AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
> > +#endif
> > +
> > +};
> > +
> > +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > +
> > static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
> >
> > +const char *get_system_type(void)
> > +{
> > +#ifdef CONFIG_MIPS_BOSPORUS
> > + return "Alchemy Bosporus Gateway Reference";
> > +#else
> > + return "Alchemy Db1x00";
> > +#endif
> > +}
> > +
> > +void __init prom_init(void)
> > +{
> > + unsigned char *memsize_str;
> > + unsigned long memsize;
> > +
> > + prom_argc = fw_arg0;
> > + prom_argv = (char **)fw_arg1;
> > + prom_envp = (char **)fw_arg2;
> > +
> > + prom_init_cmdline();
> > +
> > + memsize_str = prom_getenv("memsize");
> > + if (!memsize_str)
> > + memsize = 0x04000000;
> > + else
> > + strict_strtol(memsize_str, 0, &memsize);
> > + add_memory_region(0, memsize, BOOT_MEM_RAM);
> > +}
> > +
> > void board_reset(void)
> > {
> > /* Hit BCSR.SW_RESET[RESET] */
> > diff --git a/arch/mips/alchemy/db1x00/init.c b/arch/mips/alchemy/db1x00/init.c
> > deleted file mode 100644
> > index 8474135..0000000
> > --- a/arch/mips/alchemy/db1x00/init.c
> > +++ /dev/null
> > @@ -1,62 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * PB1000 board setup
> > - *
> > - * Copyright 2001, 2008 MontaVista Software Inc.
> > - * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/kernel.h>
> > -
> > -#include <asm/bootinfo.h>
> > -
> > -#include <prom.h>
> > -
> > -const char *get_system_type(void)
> > -{
> > -#ifdef CONFIG_MIPS_BOSPORUS
> > - return "Alchemy Bosporus Gateway Reference";
> > -#else
> > - return "Alchemy Db1x00";
> > -#endif
> > -}
> > -
> > -void __init prom_init(void)
> > -{
> > - unsigned char *memsize_str;
> > - unsigned long memsize;
> > -
> > - prom_argc = fw_arg0;
> > - prom_argv = (char **)fw_arg1;
> > - prom_envp = (char **)fw_arg2;
> > -
> > - prom_init_cmdline();
> > -
> > - memsize_str = prom_getenv("memsize");
> > - if (!memsize_str)
> > - memsize = 0x04000000;
> > - else
> > - strict_strtol(memsize_str, 0, &memsize);
> > - add_memory_region(0, memsize, BOOT_MEM_RAM);
> > -}
> > diff --git a/arch/mips/alchemy/db1x00/irqmap.c b/arch/mips/alchemy/db1x00/irqmap.c
> > deleted file mode 100644
> > index 94c090e..0000000
> > --- a/arch/mips/alchemy/db1x00/irqmap.c
> > +++ /dev/null
> > @@ -1,86 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Au1xxx irq map table
> > - *
> > - * Copyright 2003 Embedded Edge, LLC
> > - * dan@xxxxxxxxxxxxxxxx
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -
> > -#include <asm/mach-au1x00/au1000.h>
> > -
> > -#ifdef CONFIG_MIPS_DB1500
> > -char irq_tab_alchemy[][5] __initdata = {
> > - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
> > - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
> > -};
> > -#endif
> > -
> > -#ifdef CONFIG_MIPS_BOSPORUS
> > -char irq_tab_alchemy[][5] __initdata = {
> > - [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
> > - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
> > - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
> > -};
> > -#endif
> > -
> > -#ifdef CONFIG_MIPS_MIRAGE
> > -char irq_tab_alchemy[][5] __initdata = {
> > - [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
> > - [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
> > - [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
> > -};
> > -#endif
> > -
> > -#ifdef CONFIG_MIPS_DB1550
> > -char irq_tab_alchemy[][5] __initdata = {
> > - [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
> > - [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
> > - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
> > -};
> > -#endif
> > -
> > -
> > -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > -
> > -#ifndef CONFIG_MIPS_MIRAGE
> > -#ifdef CONFIG_MIPS_DB1550
> > - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
> > - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
> > -#else
> > - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
> > - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
> > - { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
> > -
> > - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
> > - { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
> > - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
> > -#endif
> > -#else
> > - { AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
> > -#endif
> > -
> > -};
> > -
> > -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile
> > index 7c67b3d..f011b2d 100644
> > --- a/arch/mips/alchemy/mtx-1/Makefile
> > +++ b/arch/mips/alchemy/mtx-1/Makefile
> > @@ -6,7 +6,7 @@
> > # Makefile for 4G Systems MTX-1 board.
> > #
> >
> > -lib-y := init.o board_setup.o irqmap.o
> > +lib-y := board_setup.o
> > obj-y := platform.o
> >
> > EXTRA_CFLAGS += -Werror
> > diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
> > index 3f80791..2e26465 100644
> > --- a/arch/mips/alchemy/mtx-1/board_setup.c
> > +++ b/arch/mips/alchemy/mtx-1/board_setup.c
> > @@ -29,12 +29,61 @@
> > */
> >
> > #include <linux/init.h>
> > -
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <asm/bootinfo.h>
> > #include <asm/mach-au1x00/au1000.h>
> > +#include <prom.h>
> >
> > extern int (*board_pci_idsel)(unsigned int devsel, int assert);
> > int mtx1_pci_idsel(unsigned int devsel, int assert);
> >
> > +char irq_tab_alchemy[][5] __initdata = {
> > + [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
> > + [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
> > + [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
> > + [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
> > + [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
> > + [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
> > + [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
> > + [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
> > +};
> > +
> > +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
> > + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
> > +};
> > +
> > +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > +
> > +
> > +const char *get_system_type(void)
> > +{
> > + return "MTX-1";
> > +}
> > +
> > +void __init prom_init(void)
> > +{
> > + unsigned char *memsize_str;
> > + unsigned long memsize;
> > +
> > + prom_argc = fw_arg0;
> > + prom_argv = (char **)fw_arg1;
> > + prom_envp = (char **)fw_arg2;
> > +
> > + prom_init_cmdline();
> > +
> > + memsize_str = prom_getenv("memsize");
> > + if (!memsize_str)
> > + memsize = 0x04000000;
> > + else
> > + strict_strtol(memsize_str, 0, &memsize);
> > + add_memory_region(0, memsize, BOOT_MEM_RAM);
> > +}
> > +
> > void board_reset(void)
> > {
> > /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
> > @@ -95,4 +144,3 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
> > au_sync_udelay(1);
> > return 1;
> > }
> > -
> > diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
> > deleted file mode 100644
> > index 3bae13c..0000000
> > --- a/arch/mips/alchemy/mtx-1/init.c
> > +++ /dev/null
> > @@ -1,60 +0,0 @@
> > -/*
> > - *
> > - * BRIEF MODULE DESCRIPTION
> > - * 4G Systems MTX-1 board setup
> > - *
> > - * Copyright 2003, 2008 MontaVista Software Inc.
> > - * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > - * Bruno Randolf <bruno.randolf@xxxxxxxxxxxxxx>
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/kernel.h>
> > -#include <linux/init.h>
> > -
> > -#include <asm/bootinfo.h>
> > -
> > -#include <prom.h>
> > -
> > -const char *get_system_type(void)
> > -{
> > - return "MTX-1";
> > -}
> > -
> > -void __init prom_init(void)
> > -{
> > - unsigned char *memsize_str;
> > - unsigned long memsize;
> > -
> > - prom_argc = fw_arg0;
> > - prom_argv = (char **)fw_arg1;
> > - prom_envp = (char **)fw_arg2;
> > -
> > - prom_init_cmdline();
> > -
> > - memsize_str = prom_getenv("memsize");
> > - if (!memsize_str)
> > - memsize = 0x04000000;
> > - else
> > - strict_strtol(memsize_str, 0, &memsize);
> > - add_memory_region(0, memsize, BOOT_MEM_RAM);
> > -}
> > diff --git a/arch/mips/alchemy/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c
> > deleted file mode 100644
> > index f2bf029..0000000
> > --- a/arch/mips/alchemy/mtx-1/irqmap.c
> > +++ /dev/null
> > @@ -1,52 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Au1xxx irq map table
> > - *
> > - * Copyright 2003 Embedded Edge, LLC
> > - * dan@xxxxxxxxxxxxxxxx
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -
> > -#include <asm/mach-au1x00/au1000.h>
> > -
> > -char irq_tab_alchemy[][5] __initdata = {
> > - [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
> > - [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
> > - [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
> > - [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
> > - [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
> > - [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
> > - [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
> > - [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
> > -};
> > -
> > -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
> > - { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
> > -};
> > -
> > -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > diff --git a/arch/mips/alchemy/pb1000/Makefile b/arch/mips/alchemy/pb1000/Makefile
> > index 99bbec0..4377ab3 100644
> > --- a/arch/mips/alchemy/pb1000/Makefile
> > +++ b/arch/mips/alchemy/pb1000/Makefile
> > @@ -5,4 +5,4 @@
> > # Makefile for the Alchemy Semiconductor Pb1000 board.
> > #
> >
> > -lib-y := init.o board_setup.o irqmap.o
> > +lib-y := board_setup.o
> > diff --git a/arch/mips/alchemy/pb1000/board_setup.c b/arch/mips/alchemy/pb1000/board_setup.c
> > index 25df167..bd0b6f4 100644
> > --- a/arch/mips/alchemy/pb1000/board_setup.c
> > +++ b/arch/mips/alchemy/pb1000/board_setup.c
> > @@ -23,11 +23,43 @@
> > * 675 Mass Ave, Cambridge, MA 02139, USA.
> > */
> >
> > -#include <linux/init.h>
> > #include <linux/delay.h>
> > -
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <asm/bootinfo.h>
> > #include <asm/mach-au1x00/au1000.h>
> > #include <asm/mach-pb1x00/pb1000.h>
> > +#include <prom.h>
> > +
> > +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > + { AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
> > +};
> > +
> > +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > +
> > +const char *get_system_type(void)
> > +{
> > + return "Alchemy Pb1000";
> > +}
> > +
> > +void __init prom_init(void)
> > +{
> > + unsigned char *memsize_str;
> > + unsigned long memsize;
> > +
> > + prom_argc = (int)fw_arg0;
> > + prom_argv = (char **)fw_arg1;
> > + prom_envp = (char **)fw_arg2;
> > +
> > + prom_init_cmdline();
> > + memsize_str = prom_getenv("memsize");
> > + if (!memsize_str)
> > + memsize = 0x04000000;
> > + else
> > + strict_strtol(memsize_str, 0, &memsize);
> > + add_memory_region(0, memsize, BOOT_MEM_RAM);
> > +}
> >
> > void board_reset(void)
> > {
> > diff --git a/arch/mips/alchemy/pb1000/init.c b/arch/mips/alchemy/pb1000/init.c
> > deleted file mode 100644
> > index 8a9c7d5..0000000
> > --- a/arch/mips/alchemy/pb1000/init.c
> > +++ /dev/null
> > @@ -1,57 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Pb1000 board setup
> > - *
> > - * Copyright 2001, 2008 MontaVista Software Inc.
> > - * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/kernel.h>
> > -
> > -#include <asm/bootinfo.h>
> > -
> > -#include <prom.h>
> > -
> > -const char *get_system_type(void)
> > -{
> > - return "Alchemy Pb1000";
> > -}
> > -
> > -void __init prom_init(void)
> > -{
> > - unsigned char *memsize_str;
> > - unsigned long memsize;
> > -
> > - prom_argc = (int)fw_arg0;
> > - prom_argv = (char **)fw_arg1;
> > - prom_envp = (char **)fw_arg2;
> > -
> > - prom_init_cmdline();
> > - memsize_str = prom_getenv("memsize");
> > - if (!memsize_str)
> > - memsize = 0x04000000;
> > - else
> > - strict_strtol(memsize_str, 0, &memsize);
> > - add_memory_region(0, memsize, BOOT_MEM_RAM);
> > -}
> > diff --git a/arch/mips/alchemy/pb1000/irqmap.c b/arch/mips/alchemy/pb1000/irqmap.c
> > deleted file mode 100644
> > index b3d56b0..0000000
> > --- a/arch/mips/alchemy/pb1000/irqmap.c
> > +++ /dev/null
> > @@ -1,38 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Au1xxx irq map table
> > - *
> > - * Copyright 2003 Embedded Edge, LLC
> > - * dan@xxxxxxxxxxxxxxxx
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/interrupt.h>
> > -
> > -#include <asm/mach-au1x00/au1000.h>
> > -
> > -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > - { AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
> > -};
> > -
> > -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > diff --git a/arch/mips/alchemy/pb1100/Makefile b/arch/mips/alchemy/pb1100/Makefile
> > index 793e97c..627a75c 100644
> > --- a/arch/mips/alchemy/pb1100/Makefile
> > +++ b/arch/mips/alchemy/pb1100/Makefile
> > @@ -5,4 +5,4 @@
> > # Makefile for the Alchemy Semiconductor Pb1100 board.
> > #
> >
> > -lib-y := init.o board_setup.o irqmap.o
> > +lib-y := board_setup.o
> > diff --git a/arch/mips/alchemy/pb1100/board_setup.c b/arch/mips/alchemy/pb1100/board_setup.c
> > index c0bfd59..87da4a5 100644
> > --- a/arch/mips/alchemy/pb1100/board_setup.c
> > +++ b/arch/mips/alchemy/pb1100/board_setup.c
> > @@ -23,11 +23,49 @@
> > * 675 Mass Ave, Cambridge, MA 02139, USA.
> > */
> >
> > -#include <linux/init.h>
> > #include <linux/delay.h>
> > -
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <asm/bootinfo.h>
> > #include <asm/mach-au1x00/au1000.h>
> > #include <asm/mach-pb1x00/pb1100.h>
> > +#include <prom.h>
> > +
> > +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > + { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
> > + { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
> > + { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
> > + { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
> > +};
> > +
> > +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > +
> > +
> > +const char *get_system_type(void)
> > +{
> > + return "Alchemy Pb1100";
> > +}
> > +
> > +void __init prom_init(void)
> > +{
> > + unsigned char *memsize_str;
> > + unsigned long memsize;
> > +
> > + prom_argc = fw_arg0;
> > + prom_argv = (char **)fw_arg1;
> > + prom_envp = (char **)fw_arg3;
> > +
> > + prom_init_cmdline();
> > +
> > + memsize_str = prom_getenv("memsize");
> > + if (!memsize_str)
> > + memsize = 0x04000000;
> > + else
> > + strict_strtol(memsize_str, 0, &memsize);
> > +
> > + add_memory_region(0, memsize, BOOT_MEM_RAM);
> > +}
> >
> > void board_reset(void)
> > {
> > diff --git a/arch/mips/alchemy/pb1100/init.c b/arch/mips/alchemy/pb1100/init.c
> > deleted file mode 100644
> > index 7c67923..0000000
> > --- a/arch/mips/alchemy/pb1100/init.c
> > +++ /dev/null
> > @@ -1,60 +0,0 @@
> > -/*
> > - *
> > - * BRIEF MODULE DESCRIPTION
> > - * Pb1100 board setup
> > - *
> > - * Copyright 2002, 2008 MontaVista Software Inc.
> > - * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/kernel.h>
> > -
> > -#include <asm/bootinfo.h>
> > -
> > -#include <prom.h>
> > -
> > -const char *get_system_type(void)
> > -{
> > - return "Alchemy Pb1100";
> > -}
> > -
> > -void __init prom_init(void)
> > -{
> > - unsigned char *memsize_str;
> > - unsigned long memsize;
> > -
> > - prom_argc = fw_arg0;
> > - prom_argv = (char **)fw_arg1;
> > - prom_envp = (char **)fw_arg3;
> > -
> > - prom_init_cmdline();
> > -
> > - memsize_str = prom_getenv("memsize");
> > - if (!memsize_str)
> > - memsize = 0x04000000;
> > - else
> > - strict_strtol(memsize_str, 0, &memsize);
> > -
> > - add_memory_region(0, memsize, BOOT_MEM_RAM);
> > -}
> > diff --git a/arch/mips/alchemy/pb1100/irqmap.c b/arch/mips/alchemy/pb1100/irqmap.c
> > deleted file mode 100644
> > index 9b7dd8b..0000000
> > --- a/arch/mips/alchemy/pb1100/irqmap.c
> > +++ /dev/null
> > @@ -1,40 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Au1xx0 IRQ map table
> > - *
> > - * Copyright 2003 Embedded Edge, LLC
> > - * dan@xxxxxxxxxxxxxxxx
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -
> > -#include <asm/mach-au1x00/au1000.h>
> > -
> > -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > - { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
> > - { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
> > - { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
> > - { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
> > -};
> > -
> > -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > diff --git a/arch/mips/alchemy/pb1200/Makefile b/arch/mips/alchemy/pb1200/Makefile
> > index d678adf..e9b9d27 100644
> > --- a/arch/mips/alchemy/pb1200/Makefile
> > +++ b/arch/mips/alchemy/pb1200/Makefile
> > @@ -2,7 +2,7 @@
> > # Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
> > #
> >
> > -lib-y := init.o board_setup.o irqmap.o
> > +lib-y := board_setup.o
> > obj-y += platform.o
> >
> > EXTRA_CFLAGS += -Werror
> > diff --git a/arch/mips/alchemy/pb1200/board_setup.c b/arch/mips/alchemy/pb1200/board_setup.c
> > index 6cb2115..a336a7a 100644
> > --- a/arch/mips/alchemy/pb1200/board_setup.c
> > +++ b/arch/mips/alchemy/pb1200/board_setup.c
> > @@ -25,14 +25,168 @@
> > */
> >
> > #include <linux/init.h>
> > -#include <linux/sched.h>
> > +#include <linux/interrupt.h>
> > +#include <asm/bootinfo.h>
> > +#include <asm/mach-au1x00/au1000.h>
> > +
> > +#ifdef CONFIG_MIPS_PB1200
> > +#include <asm/mach-pb1x00/pb1200.h>
> > +#endif
> > +
> > +#ifdef CONFIG_MIPS_DB1200
> > +#include <asm/mach-db1x00/db1200.h>
> > +#define PB1200_INT_BEGIN DB1200_INT_BEGIN
> > +#define PB1200_INT_END DB1200_INT_END
> > +#endif
> >
> > #include <prom.h>
> > -#include <au1xxx.h>
> >
> > -extern void _board_init_irq(void);
> > extern void (*board_init_irq)(void);
> >
> > +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > + /* This is external interrupt cascade */
> > + { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
> > +};
> > +
> > +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > +
> > +/*
> > + * Support for External interrupts on the Pb1200 Development platform.
> > + */
> > +static volatile int pb1200_cascade_en;
> > +
> > +irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
> > +{
> > + unsigned short bisr = bcsr->int_status;
> > + int extirq_nr = 0;
> > +
> > + /* Clear all the edge interrupts. This has no effect on level. */
> > + bcsr->int_status = bisr;
> > + for ( ; bisr; bisr &= bisr - 1) {
> > + extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
> > + /* Ack and dispatch IRQ */
> > + do_IRQ(extirq_nr);
> > + }
> > +
> > + return IRQ_RETVAL(1);
> > +}
> > +
> > +inline void pb1200_enable_irq(unsigned int irq_nr)
> > +{
> > + bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
> > + bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
> > +}
> > +
> > +inline void pb1200_disable_irq(unsigned int irq_nr)
> > +{
> > + bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
> > + bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
> > +}
> > +
> > +static unsigned int pb1200_setup_cascade(void)
> > +{
> > + return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
> > + 0, "Pb1200 Cascade", &pb1200_cascade_handler);
> > +}
> > +
> > +static unsigned int pb1200_startup_irq(unsigned int irq)
> > +{
> > + if (++pb1200_cascade_en == 1) {
> > + int res;
> > +
> > + res = pb1200_setup_cascade();
> > + if (res)
> > + return res;
> > + }
> > +
> > + pb1200_enable_irq(irq);
> > +
> > + return 0;
> > +}
> > +
> > +static void pb1200_shutdown_irq(unsigned int irq)
> > +{
> > + pb1200_disable_irq(irq);
> > + if (--pb1200_cascade_en == 0)
> > + free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
> > +}
> > +
> > +static struct irq_chip external_irq_type = {
> > +#ifdef CONFIG_MIPS_PB1200
> > + .name = "Pb1200 Ext",
> > +#endif
> > +#ifdef CONFIG_MIPS_DB1200
> > + .name = "Db1200 Ext",
> > +#endif
> > + .startup = pb1200_startup_irq,
> > + .shutdown = pb1200_shutdown_irq,
> > + .ack = pb1200_disable_irq,
> > + .mask = pb1200_disable_irq,
> > + .mask_ack = pb1200_disable_irq,
> > + .unmask = pb1200_enable_irq,
> > +};
> > +
> > +static void pb1200_init_irq(void)
> > +{
> > + unsigned int irq;
> > +
> > +#ifdef CONFIG_MIPS_PB1200
> > + /* We have a problem with CPLD rev 3. */
> > + if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
> > + printk(KERN_ERR "updated to latest revision. This software will\n");
> > + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + printk(KERN_ERR "WARNING!!!\n");
> > + panic("Game over. Your score is 0.");
> > + }
> > +#endif
> > +
> > + for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
> > + set_irq_chip_and_handler(irq, &external_irq_type,
> > + handle_level_irq);
> > + pb1200_disable_irq(irq);
> > + }
> > +
> > + /*
> > + * GPIO_7 can not be hooked here, so it is hooked upon first
> > + * request of any source attached to the cascade.
> > + */
> > +}
> > +
> > +const char *get_system_type(void)
> > +{
> > + return "Alchemy Pb1200";
> > +}
> > +
> > +void __init prom_init(void)
> > +{
> > + unsigned char *memsize_str;
> > + unsigned long memsize;
> > +
> > + prom_argc = (int)fw_arg0;
> > + prom_argv = (char **)fw_arg1;
> > + prom_envp = (char **)fw_arg2;
> > +
> > + prom_init_cmdline();
> > + memsize_str = prom_getenv("memsize");
> > + if (!memsize_str)
> > + memsize = 0x08000000;
> > + else
> > + strict_strtol(memsize_str, 0, &memsize);
> > + add_memory_region(0, memsize, BOOT_MEM_RAM);
> > +}
> > +
> > void board_reset(void)
> > {
> > bcsr->resets = 0;
> > @@ -126,7 +280,7 @@ void __init board_setup(void)
> > #endif
> >
> > /* Setup Pb1200 External Interrupt Controller */
> > - board_init_irq = _board_init_irq;
> > + board_init_irq = pb1200_init_irq;
> > }
> >
> > int board_au1200fb_panel(void)
> > diff --git a/arch/mips/alchemy/pb1200/init.c b/arch/mips/alchemy/pb1200/init.c
> > deleted file mode 100644
> > index e9b2a0f..0000000
> > --- a/arch/mips/alchemy/pb1200/init.c
> > +++ /dev/null
> > @@ -1,58 +0,0 @@
> > -/*
> > - *
> > - * BRIEF MODULE DESCRIPTION
> > - * PB1200 board setup
> > - *
> > - * Copyright 2001, 2008 MontaVista Software Inc.
> > - * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/kernel.h>
> > -
> > -#include <asm/bootinfo.h>
> > -
> > -#include <prom.h>
> > -
> > -const char *get_system_type(void)
> > -{
> > - return "Alchemy Pb1200";
> > -}
> > -
> > -void __init prom_init(void)
> > -{
> > - unsigned char *memsize_str;
> > - unsigned long memsize;
> > -
> > - prom_argc = (int)fw_arg0;
> > - prom_argv = (char **)fw_arg1;
> > - prom_envp = (char **)fw_arg2;
> > -
> > - prom_init_cmdline();
> > - memsize_str = prom_getenv("memsize");
> > - if (!memsize_str)
> > - memsize = 0x08000000;
> > - else
> > - strict_strtol(memsize_str, 0, &memsize);
> > - add_memory_region(0, memsize, BOOT_MEM_RAM);
> > -}
> > diff --git a/arch/mips/alchemy/pb1200/irqmap.c b/arch/mips/alchemy/pb1200/irqmap.c
> > deleted file mode 100644
> > index 2a505ad..0000000
> > --- a/arch/mips/alchemy/pb1200/irqmap.c
> > +++ /dev/null
> > @@ -1,160 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Au1xxx irq map table
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/interrupt.h>
> > -
> > -#include <asm/mach-au1x00/au1000.h>
> > -
> > -#ifdef CONFIG_MIPS_PB1200
> > -#include <asm/mach-pb1x00/pb1200.h>
> > -#endif
> > -
> > -#ifdef CONFIG_MIPS_DB1200
> > -#include <asm/mach-db1x00/db1200.h>
> > -#define PB1200_INT_BEGIN DB1200_INT_BEGIN
> > -#define PB1200_INT_END DB1200_INT_END
> > -#endif
> > -
> > -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > - /* This is external interrupt cascade */
> > - { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
> > -};
> > -
> > -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > -
> > -/*
> > - * Support for External interrupts on the Pb1200 Development platform.
> > - */
> > -static volatile int pb1200_cascade_en;
> > -
> > -irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
> > -{
> > - unsigned short bisr = bcsr->int_status;
> > - int extirq_nr = 0;
> > -
> > - /* Clear all the edge interrupts. This has no effect on level. */
> > - bcsr->int_status = bisr;
> > - for ( ; bisr; bisr &= bisr - 1) {
> > - extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
> > - /* Ack and dispatch IRQ */
> > - do_IRQ(extirq_nr);
> > - }
> > -
> > - return IRQ_RETVAL(1);
> > -}
> > -
> > -inline void pb1200_enable_irq(unsigned int irq_nr)
> > -{
> > - bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
> > - bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
> > -}
> > -
> > -inline void pb1200_disable_irq(unsigned int irq_nr)
> > -{
> > - bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
> > - bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
> > -}
> > -
> > -static unsigned int pb1200_setup_cascade(void)
> > -{
> > - return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
> > - 0, "Pb1200 Cascade", &pb1200_cascade_handler);
> > -}
> > -
> > -static unsigned int pb1200_startup_irq(unsigned int irq)
> > -{
> > - if (++pb1200_cascade_en == 1) {
> > - int res;
> > -
> > - res = pb1200_setup_cascade();
> > - if (res)
> > - return res;
> > - }
> > -
> > - pb1200_enable_irq(irq);
> > -
> > - return 0;
> > -}
> > -
> > -static void pb1200_shutdown_irq(unsigned int irq)
> > -{
> > - pb1200_disable_irq(irq);
> > - if (--pb1200_cascade_en == 0)
> > - free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
> > -}
> > -
> > -static struct irq_chip external_irq_type = {
> > -#ifdef CONFIG_MIPS_PB1200
> > - .name = "Pb1200 Ext",
> > -#endif
> > -#ifdef CONFIG_MIPS_DB1200
> > - .name = "Db1200 Ext",
> > -#endif
> > - .startup = pb1200_startup_irq,
> > - .shutdown = pb1200_shutdown_irq,
> > - .ack = pb1200_disable_irq,
> > - .mask = pb1200_disable_irq,
> > - .mask_ack = pb1200_disable_irq,
> > - .unmask = pb1200_enable_irq,
> > -};
> > -
> > -void _board_init_irq(void)
> > -{
> > - unsigned int irq;
> > -
> > -#ifdef CONFIG_MIPS_PB1200
> > - /* We have a problem with CPLD rev 3. */
> > - if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
> > - printk(KERN_ERR "updated to latest revision. This software will\n");
> > - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - printk(KERN_ERR "WARNING!!!\n");
> > - panic("Game over. Your score is 0.");
> > - }
> > -#endif
> > -
> > - for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
> > - set_irq_chip_and_handler(irq, &external_irq_type,
> > - handle_level_irq);
> > - pb1200_disable_irq(irq);
> > - }
> > -
> > - /*
> > - * GPIO_7 can not be hooked here, so it is hooked upon first
> > - * request of any source attached to the cascade.
> > - */
> > -}
> > diff --git a/arch/mips/alchemy/pb1500/Makefile b/arch/mips/alchemy/pb1500/Makefile
> > index 602f38d..4664d61 100644
> > --- a/arch/mips/alchemy/pb1500/Makefile
> > +++ b/arch/mips/alchemy/pb1500/Makefile
> > @@ -5,4 +5,4 @@
> > # Makefile for the Alchemy Semiconductor Pb1500 board.
> > #
> >
> > -lib-y := init.o board_setup.o irqmap.o
> > +lib-y := board_setup.o
> > diff --git a/arch/mips/alchemy/pb1500/board_setup.c b/arch/mips/alchemy/pb1500/board_setup.c
> > index 035771c..1be1afc 100644
> > --- a/arch/mips/alchemy/pb1500/board_setup.c
> > +++ b/arch/mips/alchemy/pb1500/board_setup.c
> > @@ -23,11 +23,53 @@
> > * 675 Mass Ave, Cambridge, MA 02139, USA.
> > */
> >
> > -#include <linux/init.h>
> > #include <linux/delay.h>
> > -
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <asm/bootinfo.h>
> > #include <asm/mach-au1x00/au1000.h>
> > #include <asm/mach-pb1x00/pb1500.h>
> > +#include <prom.h>
> > +
> > +char irq_tab_alchemy[][5] __initdata = {
> > + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
> > + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
> > +};
> > +
> > +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
> > + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
> > +};
> > +
> > +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > +
> > +
> > +const char *get_system_type(void)
> > +{
> > + return "Alchemy Pb1500";
> > +}
> > +
> > +void __init prom_init(void)
> > +{
> > + unsigned char *memsize_str;
> > + unsigned long memsize;
> > +
> > + prom_argc = (int)fw_arg0;
> > + prom_argv = (char **)fw_arg1;
> > + prom_envp = (char **)fw_arg2;
> > +
> > + prom_init_cmdline();
> > + memsize_str = prom_getenv("memsize");
> > + if (!memsize_str)
> > + memsize = 0x04000000;
> > + else
> > + strict_strtol(memsize_str, 0, &memsize);
> > + add_memory_region(0, memsize, BOOT_MEM_RAM);
> > +}
> >
> > void board_reset(void)
> > {
> > diff --git a/arch/mips/alchemy/pb1500/init.c b/arch/mips/alchemy/pb1500/init.c
> > deleted file mode 100644
> > index 3b6e395..0000000
> > --- a/arch/mips/alchemy/pb1500/init.c
> > +++ /dev/null
> > @@ -1,58 +0,0 @@
> > -/*
> > - *
> > - * BRIEF MODULE DESCRIPTION
> > - * Pb1500 board setup
> > - *
> > - * Copyright 2001, 2008 MontaVista Software Inc.
> > - * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/kernel.h>
> > -
> > -#include <asm/bootinfo.h>
> > -
> > -#include <prom.h>
> > -
> > -const char *get_system_type(void)
> > -{
> > - return "Alchemy Pb1500";
> > -}
> > -
> > -void __init prom_init(void)
> > -{
> > - unsigned char *memsize_str;
> > - unsigned long memsize;
> > -
> > - prom_argc = (int)fw_arg0;
> > - prom_argv = (char **)fw_arg1;
> > - prom_envp = (char **)fw_arg2;
> > -
> > - prom_init_cmdline();
> > - memsize_str = prom_getenv("memsize");
> > - if (!memsize_str)
> > - memsize = 0x04000000;
> > - else
> > - strict_strtol(memsize_str, 0, &memsize);
> > - add_memory_region(0, memsize, BOOT_MEM_RAM);
> > -}
> > diff --git a/arch/mips/alchemy/pb1500/irqmap.c b/arch/mips/alchemy/pb1500/irqmap.c
> > deleted file mode 100644
> > index 39c4682..0000000
> > --- a/arch/mips/alchemy/pb1500/irqmap.c
> > +++ /dev/null
> > @@ -1,46 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Au1xxx irq map table
> > - *
> > - * Copyright 2003 Embedded Edge, LLC
> > - * dan@xxxxxxxxxxxxxxxx
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -
> > -#include <asm/mach-au1x00/au1000.h>
> > -
> > -char irq_tab_alchemy[][5] __initdata = {
> > - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
> > - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
> > -};
> > -
> > -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
> > - { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
> > -};
> > -
> > -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > diff --git a/arch/mips/alchemy/pb1550/Makefile b/arch/mips/alchemy/pb1550/Makefile
> > index 7d8beca..7e6453d 100644
> > --- a/arch/mips/alchemy/pb1550/Makefile
> > +++ b/arch/mips/alchemy/pb1550/Makefile
> > @@ -5,4 +5,4 @@
> > # Makefile for the Alchemy Semiconductor Pb1550 board.
> > #
> >
> > -lib-y := init.o board_setup.o irqmap.o
> > +lib-y := board_setup.o
> > diff --git a/arch/mips/alchemy/pb1550/board_setup.c b/arch/mips/alchemy/pb1550/board_setup.c
> > index 0ed76b6..e844484 100644
> > --- a/arch/mips/alchemy/pb1550/board_setup.c
> > +++ b/arch/mips/alchemy/pb1550/board_setup.c
> > @@ -28,9 +28,48 @@
> > */
> >
> > #include <linux/init.h>
> > -
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <asm/bootinfo.h>
> > #include <asm/mach-au1x00/au1000.h>
> > #include <asm/mach-pb1x00/pb1550.h>
> > +#include <prom.h>
> > +
> > +char irq_tab_alchemy[][5] __initdata = {
> > + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
> > + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
> > +};
> > +
> > +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
> > +};
> > +
> > +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > +
> > +
> > +const char *get_system_type(void)
> > +{
> > + return "Alchemy Pb1550";
> > +}
> > +
> > +void __init prom_init(void)
> > +{
> > + unsigned char *memsize_str;
> > + unsigned long memsize;
> > +
> > + prom_argc = (int)fw_arg0;
> > + prom_argv = (char **)fw_arg1;
> > + prom_envp = (char **)fw_arg2;
> > +
> > + prom_init_cmdline();
> > + memsize_str = prom_getenv("memsize");
> > + if (!memsize_str)
> > + memsize = 0x08000000;
> > + else
> > + strict_strtol(memsize_str, 0, &memsize);
> > + add_memory_region(0, memsize, BOOT_MEM_RAM);
> > +}
> >
> > void board_reset(void)
> > {
> > diff --git a/arch/mips/alchemy/pb1550/init.c b/arch/mips/alchemy/pb1550/init.c
> > deleted file mode 100644
> > index e1055a1..0000000
> > --- a/arch/mips/alchemy/pb1550/init.c
> > +++ /dev/null
> > @@ -1,58 +0,0 @@
> > -/*
> > - *
> > - * BRIEF MODULE DESCRIPTION
> > - * Pb1550 board setup
> > - *
> > - * Copyright 2001, 2008 MontaVista Software Inc.
> > - * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/kernel.h>
> > -
> > -#include <asm/bootinfo.h>
> > -
> > -#include <prom.h>
> > -
> > -const char *get_system_type(void)
> > -{
> > - return "Alchemy Pb1550";
> > -}
> > -
> > -void __init prom_init(void)
> > -{
> > - unsigned char *memsize_str;
> > - unsigned long memsize;
> > -
> > - prom_argc = (int)fw_arg0;
> > - prom_argv = (char **)fw_arg1;
> > - prom_envp = (char **)fw_arg2;
> > -
> > - prom_init_cmdline();
> > - memsize_str = prom_getenv("memsize");
> > - if (!memsize_str)
> > - memsize = 0x08000000;
> > - else
> > - strict_strtol(memsize_str, 0, &memsize);
> > - add_memory_region(0, memsize, BOOT_MEM_RAM);
> > -}
> > diff --git a/arch/mips/alchemy/pb1550/irqmap.c b/arch/mips/alchemy/pb1550/irqmap.c
> > deleted file mode 100644
> > index a02a4d1..0000000
> > --- a/arch/mips/alchemy/pb1550/irqmap.c
> > +++ /dev/null
> > @@ -1,43 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Au1xx0 IRQ map table
> > - *
> > - * Copyright 2003 Embedded Edge, LLC
> > - * dan@xxxxxxxxxxxxxxxx
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -
> > -#include <asm/mach-au1x00/au1000.h>
> > -
> > -char irq_tab_alchemy[][5] __initdata = {
> > - [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
> > - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
> > -};
> > -
> > -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
> > -};
> > -
> > -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile
> > index db3c526..9ec3b54 100644
> > --- a/arch/mips/alchemy/xxs1500/Makefile
> > +++ b/arch/mips/alchemy/xxs1500/Makefile
> > @@ -5,4 +5,4 @@
> > # Makefile for MyCable XXS1500 board.
> > #
> >
> > -lib-y := init.o board_setup.o irqmap.o
> > +lib-y := board_setup.o
> > diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
> > index 4c587ac..813668f 100644
> > --- a/arch/mips/alchemy/xxs1500/board_setup.c
> > +++ b/arch/mips/alchemy/xxs1500/board_setup.c
> > @@ -23,10 +23,56 @@
> > * 675 Mass Ave, Cambridge, MA 02139, USA.
> > */
> >
> > -#include <linux/init.h>
> > #include <linux/delay.h>
> > -
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <asm/bootinfo.h>
> > #include <asm/mach-au1x00/au1000.h>
> > +#include <prom.h>
> > +
> > +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
> > + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
> > +
> > + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
> > + { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
> > + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
> > +};
> > +
> > +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> > +
> > +
> > +const char *get_system_type(void)
> > +{
> > + return "XXS1500";
> > +}
> > +
> > +void __init prom_init(void)
> > +{
> > + unsigned char *memsize_str;
> > + unsigned long memsize;
> > +
> > + prom_argc = fw_arg0;
> > + prom_argv = (char **)fw_arg1;
> > + prom_envp = (char **)fw_arg2;
> > +
> > + prom_init_cmdline();
> > +
> > + memsize_str = prom_getenv("memsize");
> > + if (!memsize_str)
> > + memsize = 0x04000000;
> > + else
> > + strict_strtol(memsize_str, 0, &memsize);
> > + add_memory_region(0, memsize, BOOT_MEM_RAM);
> > +}
> >
> > void board_reset(void)
> > {
> > diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
> > deleted file mode 100644
> > index 7516434..0000000
> > --- a/arch/mips/alchemy/xxs1500/init.c
> > +++ /dev/null
> > @@ -1,58 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * XXS1500 board setup
> > - *
> > - * Copyright 2003, 2008 MontaVista Software Inc.
> > - * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -#include <linux/kernel.h>
> > -
> > -#include <asm/bootinfo.h>
> > -
> > -#include <prom.h>
> > -
> > -const char *get_system_type(void)
> > -{
> > - return "XXS1500";
> > -}
> > -
> > -void __init prom_init(void)
> > -{
> > - unsigned char *memsize_str;
> > - unsigned long memsize;
> > -
> > - prom_argc = fw_arg0;
> > - prom_argv = (char **)fw_arg1;
> > - prom_envp = (char **)fw_arg2;
> > -
> > - prom_init_cmdline();
> > -
> > - memsize_str = prom_getenv("memsize");
> > - if (!memsize_str)
> > - memsize = 0x04000000;
> > - else
> > - strict_strtol(memsize_str, 0, &memsize);
> > - add_memory_region(0, memsize, BOOT_MEM_RAM);
> > -}
> > diff --git a/arch/mips/alchemy/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c
> > deleted file mode 100644
> > index edf06ed..0000000
> > --- a/arch/mips/alchemy/xxs1500/irqmap.c
> > +++ /dev/null
> > @@ -1,49 +0,0 @@
> > -/*
> > - * BRIEF MODULE DESCRIPTION
> > - * Au1xxx irq map table
> > - *
> > - * Copyright 2003 Embedded Edge, LLC
> > - * dan@xxxxxxxxxxxxxxxx
> > - *
> > - * This program is free software; you can redistribute it and/or modify it
> > - * under the terms of the GNU General Public License as published by the
> > - * Free Software Foundation; either version 2 of the License, or (at your
> > - * option) any later version.
> > - *
> > - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> > - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> > - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
> > - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
> > - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> > - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> > - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> > - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > - *
> > - * You should have received a copy of the GNU General Public License along
> > - * with this program; if not, write to the Free Software Foundation, Inc.,
> > - * 675 Mass Ave, Cambridge, MA 02139, USA.
> > - */
> > -
> > -#include <linux/init.h>
> > -
> > -#include <asm/mach-au1x00/au1000.h>
> > -
> > -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
> > - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
> > - { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
> > -
> > - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
> > - { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
> > - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
> > -};
> > -
> > -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
> --
> Kevin Hickey
> Alchemy Solutions
> RMI Corporation
> khickey@xxxxxxxxxxx
> P: 512.691.8044
>
