Remove unused saa9730_uart.h.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
diff -pruN -X /home/yuasa/Memo/dontdiff linux-orig/include/asm-mips/mips-boards/saa9730_uart.h linux/include/asm-mips/mips-boards/saa9730_uart.h
--- linux-orig/include/asm-mips/mips-boards/saa9730_uart.h 2008-07-18 10:53:59.448363041 +0900
+++ linux/include/asm-mips/mips-boards/saa9730_uart.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,69 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@xxxxxxxx
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Register definitions for the UART part of the Philips SAA9730 chip.
- *
- */
-
-#ifndef SAA9730_UART_H
-#define SAA9730_UART_H
-
-/* The SAA9730 UART register map, as seen via the PCI bus */
-
-#define SAA9730_UART_REGS_ADDR 0x21800
-
-struct uart_saa9730_regmap {
- volatile unsigned char Thr_Rbr;
- volatile unsigned char Ier;
- volatile unsigned char Iir_Fcr;
- volatile unsigned char Lcr;
- volatile unsigned char Mcr;
- volatile unsigned char Lsr;
- volatile unsigned char Msr;
- volatile unsigned char Scr;
- volatile unsigned char BaudDivLsb;
- volatile unsigned char BaudDivMsb;
- volatile unsigned char Junk0;
- volatile unsigned char Junk1;
- volatile unsigned int Config; /* 0x2180c */
- volatile unsigned int TxStart; /* 0x21810 */
- volatile unsigned int TxLength; /* 0x21814 */
- volatile unsigned int TxCounter; /* 0x21818 */
- volatile unsigned int RxStart; /* 0x2181c */
- volatile unsigned int RxLength; /* 0x21820 */
- volatile unsigned int RxCounter; /* 0x21824 */
-};
-typedef volatile struct uart_saa9730_regmap t_uart_saa9730_regmap;
-
-/*
- * Only a subset of the UART control bits are defined here,
- * enough to make the serial debug port work.
- */
-
-#define SAA9730_LCR_DATA8 0x03
-
-#define SAA9730_MCR_DTR 0x01
-#define SAA9730_MCR_RTS 0x02
-
-#define SAA9730_LSR_DR 0x01
-#define SAA9730_LSR_THRE 0x20
-
-#endif /* !(SAA9730_UART_H) */
