Hello.
Manuel Lauss wrote:
Add au1xmmc platform data for PB1200/DB1200 boards, and wire up
the 2 SD controllers for them.
Signed-off-by: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
OK, this definitely looks better (and shorter :-).
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 8cae775..6225e95 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
[...]
@@ -248,15 +232,70 @@ static struct platform_device au1200_lcd_device = {
static u64 au1xxx_mmc_dmamask = ~(u32)0;
-static struct platform_device au1xxx_mmc_device = {
+extern struct au1xmmc_platform_data au1xmmc_platdata[2];
+
+static struct resource au1200_mmc0_resources[] = {
+ [0] = {
+ .start = SD0_PHYS_ADDR,
+ .end = SD0_PHYS_ADDR + 0x7ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = DSCR_CMD0_SDMS_TX0,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DSCR_CMD0_SDMS_RX0,
+ .flags = IORESOURCE_DMA,
+ }
+};
+
+static struct resource au1200_mmc1_resources[] = {
+ [0] = {
+ .start = SD1_PHYS_ADDR,
+ .end = SD1_PHYS_ADDR + 0x7ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = DSCR_CMD0_SDMS_TX1,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DSCR_CMD0_SDMS_RX1,
+ .flags = IORESOURCE_DMA,
+ }
+};
+
Shouldn't the IRQ/DMA resources also have their 'end' field set?
[...]
diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c
index 5930110..f329a38 100644
--- a/arch/mips/au1000/pb1200/platform.c
+++ b/arch/mips/au1000/pb1200/platform.c
@@ -22,6 +22,66 @@
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+
+static void pb1200mmc0_set_power(void *mmc_host, int state)
+{
+ if (state)
+ bcsr->board |= BCSR_BOARD_SD0PWR;
+ else
+ bcsr->board &= ~BCSR_BOARD_SD0PWR;
+
+ au_sync_delay(1);
+}
+
+static int pb1200mmc0_card_readonly(void *mmc_host)
+{
+ return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
+}
+
+static int pb1200mmc0_card_inserted(void *mmc_host)
+{
+ return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
+}
+
+#ifndef CONFIG_MIPS_DB1200
+static void pb1200mmc1_set_power(void *mmc_host, int state)
+{
+ if (state)
+ bcsr->board |= BCSR_BOARD_SD1PWR;
+ else
+ bcsr->board &= ~BCSR_BOARD_SD1PWR;
+
+ au_sync_delay(1);
+}
+
+static int pb1200mmc1_card_readonly(void *mmc_host)
+{
+ return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
+}
+
+static int pb1200mmc1_card_inserted(void *mmc_host)
+{
+ return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
+}
+#endif
These 2 separate versions could be converted into single one by using the
data arrays holding info BCSR bits -- something like the MMC driver has currently.
+
+const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
+ [0] = {
+ .set_power = pb1200mmc0_set_power,
+ .card_inserted = pb1200mmc0_card_inserted,
+ .card_readonly = pb1200mmc0_card_readonly,
+ .cd_setup = NULL, /* use poll-timer in driver */
+ },
+#ifndef CONFIG_MIPS_DB1200
+ [1] = {
+ .set_power = pb1200mmc1_set_power,
+ .card_inserted = pb1200mmc1_card_inserted,
+ .card_readonly = pb1200mmc1_card_readonly,
+ .cd_setup = NULL, /* use poll-timer in driver */
+ },
+#endif
+};
You don't have to explicitly set 'cd_setup' to NULL...
PS: BTW, I've noticed that include/asm-mips/mach-db1x00/db1x00.h defines
macros mmc_card_insterted() and mmc_power_on() which no code seems to be using
(might have been intended for use by the MMC driver but why no such macros in
other board headers?). Care to remove those while you're working on MMC?
WBR, Sergei
