Re: MIPS kernel hangs: Warning: unable to open an initial console. /sbin/init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The linux-mips list is the right place for this question.

[1] Do you have serial console or other appropriate device enabled in the build for your board?

[2] In the arch specific init code, did you specify the default console device in the code?

[3] Did you set the console on the kernel command line?

This sounds like a simple oversight somewhere. The kernel is very unhappy without the console.

-S-

On Thu, 15 May 2008, abhiruchi.g@xxxxxxxxxxxxx wrote:

Hi,

My kernel hangs by initializing the system. My target is Alchemy DB1200. I use crosstool-ng to build MIPS cross toolchain and ptxdist to build ext2 filesystem.
kernel version:linux-2.6.22


I added some printk's  linux/init/main.c to see what happens.

#############################################################

	.
	.
	.
	(void) dup(0);
	(void) dup(0);

	/*
	 * We try each of these until one succeeds.
	 *
	 * The Bourne shell can be used instead of init if we are
	 * trying to recover a really broken machine.
	 */
	if (execute_command)
		run_init_process(execute_command);
	printk("before /sbin/init\n");
	run_init_process("/sbin/init");
	printk("before /etc/init\n");
	run_init_process("/etc/init");
	printk("before  /bin/init\n");
	run_init_process("/bin/init");
	printk("before  /bin/sh\n");
	run_init_process("/bin/sh");

it hangs after /sbin/init

What could be the problem?

I tried to give init="/sbin/abhi"
"abhi" is an executable file with printf statement.
but kernel stops after :


Waiting 10sec before mounting root device...
scsi 0:0:0:0: Direct-Access     Ut163    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 983808 512-byte hardware sectors (504 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 983808 512-byte hardware sectors (504 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda:<7>usb-storage: queuecommand called
sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
VFS: Mounted root (ext2 filesystem) readonly.
mount_block_root: name=/dev/root fs=ext2 flags=32769
Freeing unused kernel memory: 156k freed
Warning: unable to open an initial console.
---ag: /sbin/abhi







[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux